CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Serial
Number
Decal
Model No. 831.298810
Serial No.
Find the serial number in the location
shown below. Write the serial number
in the space above for reference.
USER'S MANUAL
SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179
Questions?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts, we
will guarantee complete satis-
faction through direct assistance
from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our Customer Hot Line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-888-825-2588
Mon.ÐFri., 6 a.m.Ð6 p.m. MST
2
Table of Contents
Important Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
How to Use the CardioTrackª Heart Rate Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Treadmill Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
How to use the Manual Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
How to use the Heart Rate Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
How to use the Incline Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
How to Fold and Move the Treadmill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Maintenance and Trouble-shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Conditioning Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Part List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Ordering Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
Note: An Exploded Drawing is attached in the center of this userÕs manual.
3
1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
2. Use the treadmill only as described in this
userÕs manual.
3. Place the treadmill on a level surface, with
eight feet of clearance behind it. Do not place
the treadmill on any surface that blocks air
openings. To protect the floor or carpet from
damage, place a mat under the treadmill.
4. Keep the treadmill indoors, away from
moisture and dust. Do not put the treadmill
in a garage or covered patio, or near water.
5. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
6. Keep children under the age of 12 and pets
away from the treadmill at all times.
7. Never allow more than one person on the
treadmill at a time.
8. Wear appropriate clothing when using the
treadmill. Do not wear loose clothing that
could become caught in the treadmill. Athletic
support clothes are recommended for both
men and women. Always wear athletic shoes.
Never use the treadmill with bare feet,
wearing only stockings, or in sandals.
9. When connecting the power cord (see How to
Plug in the Power Cord on page 10), plug the
power cord into a surge protector (not
included) and plug the surge protector into a
grounded circuit capable of carrying 15 or
more amps. No other appliance should be on
the same circuit.
10. Use only a single-outlet surge suppressor
that is UL 1449 listed as a transient voltage
surge suppressor (TVSS). The surge suppres-
sor must have a UL suppressed voltage rating
of 400 volts or less and a minimum surge dis-
sipation of 450 joules. The surge suppressor
must be electrically rated for 120 volts AC and
15 amps.
11. Keep the power cord and the surge suppres-
sor away from heated surfaces.
12. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See
Before You Begin on page 5 if the treadmill
is not working properly.)
13. Never start the treadmill while you are
standing on the walking belt. Always hold
the handrails while using the treadmill.
14. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.
15. The heart rate monitor is not a medical
device. Various factors may affect the accu-
racy of heart rate readings. The heart rate
monitor is intended only as an exercise aid in
determining heart rate trends in general.
16. Never leave the treadmill unattended while it
is running. Always remove the key, unplug
the power cord and move the on/off switch to
the off position when the treadmill is not in
use. (See the drawing on page 5 for the loca-
tion of the on/off switch.)
17. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
Assembly on page 6, and How to Move the
Treadmill on page 18.) You must be able to
safely lift 45 pounds (20 kg) in order to raise,
lower, or move the treadmill.
18. When folding or moving the treadmill, make
sure that the frame is held securely by the
storage latch.
19. Inspect and tighten all parts of the treadmill
every three months.
20. Never drop or insert any object into any
opening.
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the
following important precautions and information before operating the treadmill.
Important Precautions
4
The decal shown has been placed on your treadmill. If the decal is missing, or if it is not legible, please
call our Customer Service Department toll-free to order a free replacement decal (see the back cover of
this manual). Apply the decal in the location shown.
21. DANGER: Always unplug the power
cord immediately after use, before cleaning
the treadmill, and before performing the
maintenance and adjustment procedures
described in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized ser-
vice representative only.
22. This treadmill is intended for in-home
use only. Do not use this treadmill in any
commercial, rental, or institutional setting.
WARNING: Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. SEARS assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
Save These Instructions
(There is one decal
on each side)
5
Thank you for selecting the new NordicTrack
PowerTreadª 1750 treadmill. The PowerTread 1750
treadmill combines advanced technology with innova-
tive design to let you enjoy an excellent form of cardio-
vascular exercise in the convenience and privacy of
your home. And when youÕre not exercising, the unique
PowerTread 1750 can be folded up, requiring less than
half the floor space of other treadmills.
For your benefit, read this manual carefully before
using the treadmill. If you have additional questions,
please call our toll-free Customer Service Department
at 1-888-825-2588, Monday through Friday, 6 a.m.
until 6 p.m. Mountain Time (excluding holidays). To
help us assist you, please note the product model
number and serial number before calling. The model
number of the treadmill is 831.298810. The serial num-
ber can be found on a decal attached to the treadmill
(see the front cover of this manual for the location).
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
Before You Begin
Handrails
Console
Storage Latch
Key/Clip*
Circuit
Breaker
On/off
Switch
Uprights
Walking Belt
Cushioned Walking Platform
Foot Rails
Roller Guards
Power Cord
Rear Roller
Adjustment Bolts
Water Bottle Holder
(Bottle not included)
Reading Rack
Accessory Tray
*IMPORTANT: Always wear the clip while operating the treadmill. If the key is pulled from the
console, the walking belt will stop.
6
1. With the help of a second person, carefully raise the
Uprights (70) until the Wheels (30) are resting flat on the
floor.
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Assembly
requires a phillips screwdriver and an adjustable wrench (not included).
1
70
30
2. Remove the four Handrail Screws (103) from the posts on
the left and right Uprights (70). Slide the upper end of a
Handrail (101) onto the post on the left Upright. Note: It
will be necessary to pivot the Handrail to the side and
back repeatedly (see arrow A) while pushing on the
Handrail to slide it fully onto the post. Next, pivot the
lower end of the Handrail down and pull back on it (see
arrow B) to align it with the hole in the left Upright.
Loosely thread a Handrail Bolt (95) with a Handrail Washer
(102) into the left Upright (70) and the lower end of the
Handrail (101). Tighten two Handrail Screws (103) into the
upper end of the Handrail and the left Upright. Tighten the
Handrail Bolt.
Attach the other Handrail (101) to the right Upright (70) as
described above.
2
70
Hole
A
B
70
101
Post
103
103
101
102
102
95
95
7
6. Make sure that all parts of the treadmill are properly tightened. Place a mat beneath the treadmill to
protect the floor or carpet.
4. Remove the two indicated Screws (43) from the left Upright
(70).
Attach the Storage Latch (5) and the two Latch Spacers
(93) to the left Upright (70) with the two Screws (43). Be
careful not to overtighten the Screws.
Note: If it is difficult to fold or lower the treadmill,
remove one or both of the Latch Spacers (93).
4
70
93
43
5
5. Remove the backing from the Wrench Clip (88). Press the
Wrench Clip onto the lower end of the Upright (70) in the
indicated location. Press the Allen Wrench (87) into the
Wrench Clip.
5
70
88
89
3. Locate the two tabs on the Reading Rack (12). Slide the
tabs up into the two slots in the front of the Console (78).
Attach the Reading Rack to the Console with six Screws
(43).
3
12
Tabs
78
43
43
The unique CardioTrack heart rate monitor is specially
designed for accuracy, comfort, and durability. To get
the best performance from the heart rate monitor,
please read the instructions below.
HOW TO PUT ON THE HEART RATE MONITOR
The heart rate monitor consists of two components:
the chest strap and the transmitter. Follow the steps
below to put on the heart rate monitor.
1. Refer to the inset drawing above. Insert the tab on
one end of the chest strap through the hole in one
end of the transmitter. Press the end of the trans-
mitter under the buckle on the chest strap. The tab
should be flush with the front of the transmitter.
2. Wrap the
heart rate
monitor
around your
chest and
attach the
other end of
the chest
strap to the
transmitter.
Adjust the
length of the
chest strap, if necessary. The heart rate monitor
should be under your clothing, against your skin,
and as high under the pectoral muscles or breasts
as is comfortable. Make sure that the NordicTrack
logo is facing forward and is right-side-up.
3. Pull the transmitter away from your body a few
inches and locate the two electrode areas on the
inner side. The electrode areas are the two long,
grooved rectangles. Using saline solution such as
saliva or contact lens solution, wet both electrode
areas. Return the transmitter to a position against
your chest.
HEART RATE MONITOR TROUBLE-SHOOTING
The instructions on pages 11 to 17 of this userÕs
manual explain how the heart rate monitor is used
with the console. If the letters ÒPLSÓ appear in the
PULSE display, or if the displayed heart rate is
excessively high or low when the heart rate moni-
tor is used, try the trouble-shooting steps below.
1. Make sure that the heart rate monitor is under your
clothing, against your skin, and as high under the
pectoral muscles or breasts as is comfortable.
Note: If the heart rate monitor does not function
when positioned as described, try moving it slightly
lower or higher on your chest.
2. Make sure that the NordicTrack logo on the trans-
mitter is facing forwards and is right-side-up.
3. Use saline solution such as saliva or contact lens
solution to wet the two electrode areas on the
transmitter. If heart rate readings do not appear
until you begin perspiring, re-wet the electrode areas.
4. As you walk or run on the treadmill, position your-
self near the center of the walking belt. For the
console to display heart rate readings, the user
must be within armÕs length of the console.
5. The heart rate monitor is designed to work with
people who have normal heart rhythms. Heart rate
reading problems may be caused by medical
conditions such as premature ventricular contrac-
tions (pvcs), tachycardia bursts, and arrhythmia.
6. The operation of the heart rate monitor can be
affected by magnetic interference caused by high
power lines or other sources. If it is suspected that
magnetic interference may be causing a problem,
try relocating the treadmill.
7. If the heart rate monitor still does not function
properly, test it by having another person try it.
8. The CR2032 battery may need to be replaced (see
page 9).
How to Use the CardioTrack
ª
Heart Rate Monitor
Chest Strap
Tabs
Transmitter
Tab
Buckle
IMPORTANT: If a user has an implanted
medical device such as a pacemaker, the
user must check with his or her physician
prior to using the heart rate monitor.
8
NordicTrack
Logo
HEART RATE MONITOR CARE AND MAINTENANCE
¥ Thoroughly dry the heart rate monitor after each
use. The heart rate monitor is activated when the
electrode areas are wetted and the heart rate moni-
tor is put on; the heart rate monitor shuts off when it
is removed and the electrode areas are dried. If the
heart rate monitor is not dried after each use, it may
remain activated longer than necessary.
¥ Store the heart rate monitor in a warm, dry place.
Do not store the heart rate monitor in a plastic bag
or other container that may trap moisture.
¥ Do not expose the heart rate monitor to direct
sunlight for extended periods of time. Do not expose
the heart rate monitor to temperatures above 122¡
Fahrenheit (50¡ Celsius) or below 14¡ Fahrenheit
(-10¡ Celsius).
¥ Do not excessively bend or stretch the transmitter
when using or storing the heart rate monitor.
¥ Clean the transmitter using water and mild soapÑ
never use alcohol, abrasives, or chemicals. The
chest strap may be hand washed and air dried.
¥ If the heart rate monitor
does not function prop-
erly, the CR 2032 bat-
tery may need to be
replaced. To replace the
battery, locate the bat-
tery cover on the back of
the transmitter. Insert a
coin into the slot in the
cover and turn the cover counterclockwise to the
ÒopenÓ position. Remove the cover.
Remove the old battery
and insert a new CR
2032 battery, making
sure that the battery is
turned so the writing is
on top. In addition, make
sure that the rubber gas-
ket is in place in the
transmitter. Replace the
battery cover and turn it
to the closed position.
9
Battery
Rubber
Gasket
10
Operation and Adjustment
THE PERFORMANT LUBE
TM
WALKING BELT
Your treadmill features a walking belt coated with
PERFORMANT LUBE
TM
, a high-performance lubricant.
IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walking plat-
form. Such substances will deteriorate the walking
belt and cause excessive wear.
HOW TO PLUG IN THE POWER CORD
Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your homeÕs power.
Voltage surges, spikes, and noise interference can
result from weather conditions or from other appliances
being turned on or off. To decrease the possibility of
your treadmill being damaged, always use a surge
suppressor with your treadmill (see drawing 1 at
the right).
Surge suppressors are sold at most hardware stores
and department stores. Use only a single-outlet surge
suppressor that is UL 1449 listed as a transient voltage
surge suppressor (TVSS). The surge suppressor must
have a UL suppressed voltage rating of 400 volts or
less and a minimum surge dissipation of 450 joules.
The surge suppressor must be electrically rated for
120 volts AC and 15 amps.
This product must be grounded. If it should malfunc-
tion or break down, grounding provides a path of least
resistance for electric current to reduce the risk of elec-
tric shock. This product is equipped with a cord having
an equipment-grounding conductor and a grounding
plug. Plug the power cord into a surge suppressor,
and plug the surge suppressor into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
This product is for use on a nominal 120-volt circuit,
and has a grounding plug that looks like the plug illus-
trated in drawing 1 below. A temporary adapter that
looks like the adapter illustrated in drawing 2 may be
used to connect the surge suppressor to a 2-pole
receptacle as shown in drawing 2 if a properly
grounded outlet is not available.
The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician.
The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw. Some 2-pole receptacle outlet box
covers are not grounded. Contact a qualified elec-
trician to determine if the outlet box cover is
grounded before using an adapter.
DANGER: Improper connection
of the equipment-grounding conductor can
result in an increased risk of electric shock.
Check with a qualified electrician or service-
man if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug provided with the productÑif it will
not fit the outlet, have a proper outlet
installed by a qualified electrician.
1
2
Grounded Outlet Box
Grounded Outlet Box
Grounding Plug
Surge Suppressor
Surge Suppressor
Grounding Pin
Adapter
Lug
Metal Screw
Grounded Outlet
Grounding Pin
FEATURES OF THE CONSOLE
The treadmill console offers an impressive array of
features designed to make your workouts more effective.
When the console is in the manual mode, the speed
and incline of the treadmill can be changed with a touch
of a button. As you exercise, five displays will provide
continuous exercise feedback. Six preset programs are
also offered: the HEART RATE program automatically
controls the speed and incline of the treadmill to keep
your heart rate near predetermined settings, and five
INCLINE programs automatically control the incline of
the treadmill as they guide you through effective work-
outs.
To use the manual mode, follow the steps on pages
12 and 13. To use the HEART RATE program, see
pages 14 and 15. To use the INCLINE programs, see
pages 16 and 17.
Note: The console can display speed and distance in
either miles or kilometers (see Speed Display on page
13). For simplicity, all instructions in this userÕs manual
refer to miles.
Clip
Key
CAUTION: Before operating the
console, read the following precautions.
¥ Do not stand on the walking belt when
turning on the power or starting the
walking belt.
¥ Always wear the clip (see the drawing
above) while operating the treadmill. If the
key is pulled from the console, the walking
belt will stop.
¥ The treadmill is capable of high speeds.
Adjust the speed in small increments.
¥ The heart rate monitor is not a medical
device. Various factors may affect the accu-
racy of heart rate readings. The heart rate
monitor is intended only as an exercise aid
in determining heart rate trends in general.
¥ If you have heart problems, or if you are
over 60 years of age and have been inactive,
do not use the HEART RATE program. If you
are taking medication regularly, consult
your physician to find whether the medica-
tion will affect your exercise heart rate.
¥ To reduce the risk of electric shock, keep
the console dry. Use only a sealed water
bottle.
DIAGRAM OF THE CONSOLE
Note: If there is a thin
sheet of plastic on the
console, remove it.
11
Plug in the power cord.
Follow the instructions on page 10 to plug in the
power cord. When the power cord is plugged in, the
displays on the console will flash once. (Note: If the
key is in the console when the power cord is
plugged in, the letters ÒPOÓ will
flash in the SPEED display. If
this occurs, remove the key.)
Next, press the on/off switch
on the front of the treadmill to
the on position.
Insert the key fully into the console.
Stand on the foot rails of
the treadmill. Slide the
clip attached to the key
onto your waistband.
Next, insert the key fully
into the console as
shown. After two sec-
onds, various displays
and indicators will light. After another five seconds, a
ÒP-1Ó will appear in the TIME/PACE display and the
current weight setting will begin to flash in the
SPEED display. Note: When you are familiar with the
console, you may go directly to step 6 if desired. The
first time you use the console, please follow all steps.
Select the MANUAL mode.
When the key is
inserted, the MANUAL
mode will be selected. If
a different program has
been selected, press
the PROGRAM SELECT
button repeatedly until a ÒP-1Ó appears in the TIME/
PACE display (program 1 is the MANUAL mode).
Enter your weight if desired.
For the CALORIES
display to be the most
accurate, your weight
should be entered into
the console. To enter
your weight, press the
WEIGHT buttons. Each time one of the buttons is
pressed, the weight setting will change by 1 pound.
If the buttons are held down, the weight setting will
change in increments of 5 pounds. Note: Once you
have entered your weight, it will be saved in the
consoleÕs memory.
Put on the CARDIOTRACK heart rate monitor if
desired.
For the PULSE display to show your heart rate, the
heart rate monitor must be worn. To put on the
heart rate monitor, see How to Use the CardioTrack
Heart Rate Monitor on page 8.
Press the START/ENTER button or the SPEED
Ò+Ó button to start the walking belt.
After the button is pressed, there will be a brief
pause; the walking belt will then begin to move at
1.0 mph. Hold the handrails and begin walking.
As you exercise,
change the speed of the
walking belt as desired
by pressing the SPEED
buttons. Each time one
of the buttons is
pressed, the speed will change by 0.1 mile per hour
(mph). If the buttons are held down, the speed will
change in increments of 0.5 mph. The speed range
is 0.5 mph to 10 mph. Note: When the SPEED
buttons are pressed, the SPEED display will show
the selected speed setting for six seconds. The
display will then show the actual speed of the
walking belt.
To stop the walking belt momentarily, press the
STOP button. The displays will pause and the
TIME/PACE display will begin to flash. To restart
the walking belt, press the START/ENTER button or
the SPEED Ò+Ó button. To stop the walking belt and
reset the displays, hold down the STOP button for
two seconds.
Change the incline of the treadmill if desired.
To change the incline of
the treadmill, press the
INCLINE buttons. Each
time one of the buttons
is pressed, the incline
will change by 0.5%.
The buttons can be held down to change the incline
quickly. The incline range is 1.5% to 10%. The
incline setting is shown in the DISTANCE/INCLINE
display.
Note: After the INCLINE buttons are pressed, it may
take a few seconds for the treadmill to reach the
selected incline setting. When you are finished
exercising, change the incline of the treadmill to
1.5%. The incline must be at 1.5% before the
treadmill is folded to the storage position or the
treadmill may be damaged.
HOW TO USE THE MANUAL MODE
2
1
3
4
5
6
7
On
12
Correct Incorrect
Follow your progress with the five displays.
PULSE display
For this display to be
active, the heart rate
monitor must be worn.
To put on the heart rate
monitor, see How to
Use the CardioTrack
Heart Rate Monitor on page 8. After a few seconds,
the heart-shaped indicator beside the PULSE display
will flash each time your heart beats. Three dashes
will then appear in the PULSE display and your heart
rate will be shown. Note: The heart rate monitor will
sample your heart rate every few seconds. It may
take up to ten seconds before an accurate heart rate
is shown. If your heart rate is not shown, see Heart
Rate Monitor Trouble-shooting on page 8.
CALORIES display
This display shows the
approximate number of
calories you have
burned.
TIME/PACE display
This display shows the
total time that the walk-
ing belt has been mov-
ing and your current
pace (pace is measured
in minutes per mile).
The display will change from one number to the
other every seven seconds. Indicators below the
display will show which number is currently shown.
Note: When a HEART RATE or INCLINE program is
selected, the display will show the time remaining in
the program rather than the elapsed time.
SPEED display
This display shows the
current speed of the
walking belt. Note:
When the SPEED but-
tons are pressed, the
display will show the
selected speed setting for six seconds. The display
will then show the actual speed of the walking belt.
Note: The speed can be shown in either miles per
hour (mph) or kilometers per hour (kph). The KPH
indicator beside the SPEED display will light when
the speed is shown in kph. To change the unit of
measurement, first hold down the STOP button
while inserting the key
into the console. An ÒEÓ
for English (miles) or an
ÒMÓ for Metric (kilome-
ters) will appear in the
PULSE display. Press
the SPEED Ò+Ó button
to change the unit of measurement. Remove and
then reinsert the key.
DISTANCE/INCLINE display
This display shows the
distance that the walk-
ing belt has moved and
the current incline level
of the treadmill. Every
seven seconds, the
display will change from one number to the other.
Indicators below the display will show which number
is currently shown.
Note: When the INCLINE buttons are pressed, the
display will change to show the selected incline set-
ting. If the KPH indicator beside the SPEED display
is dark, the distance will be displayed in miles. If the
KPH indicator is lit, the distance will be displayed in
kilometers.
When you are finished exercising, stop the
walking belt and remove the key.
Step onto the foot rails
and press the STOP
button. Change the
incline of the
treadmill to 1.5%. The
incline must be at
1.5% before the treadmill is folded to the storage
position or the treadmill may be damaged.
Remove the key from the console. Store the key in a
secure place. In addition, press the on/off switch to
the off position. (See the drawing near the top of
page 12.)
8
9
13
The HEART RATE
program automati-
cally controls the
speed and incline of
the treadmill to keep
your heart rate near
a setting that you
choose. The pro-
gram is 60 minutes
in length. Follow the steps below to use the HEART
RATE program.
Plug in the power cord.
See step 1 on page 12.
Insert the key fully into the console.
See step 2 on page 12.
Put on the CardioTrack heart rate monitor.
The heart rate monitor must be worn when the
HEART RATE program is used. To put on the heart
rate monitor, see How to Use the CardioTrack Heart
Rate Monitor on page 8. Note: During the HEART
RATE program, the speed and/or incline of the tread-
mill may automatically decrease if your heart rate is
not detected for an extended period of time.
Select the HEART RATE program.
When the key is
inserted, the MANUAL
mode will be selected.
To select the HEART
RATE program, press
the PROGRAM
SELECT button repeatedly until a ÒP-2Ó appears in
the TIME/PACE display. (Program 2 is the SELF
SELECT program.)
Enter your weight if desired.
When the HEART RATE
program is selected, the
current weight setting
will begin to flash in the
SPEED display. Although
it is not necessary to
enter your weight to use the HEART RATE program,
the CALORIES display will be more accurate if your
weight is entered. To enter your weight, press the
WEIGHT buttons and then press the START/ENTER
button. If you have already entered your weight, or if
you do not want to enter your weight, simply press
the START/ENTER button.
Enter your age.
When the START/
ENTER button is
pressed, the current
age setting will begin to
flash in the INCLINE/
DISTANCE display.
You must enter your age to use the HEART
RATE program. If you have not entered your age,
press the AGE buttons. Each time one of the but-
tons is pressed, the age setting will change by 1
year. If the buttons are held down, the age setting
will change in increments of 5 years. Note: Once you
have entered your age, it will be saved in the con-
soleÕs memory.
Select a heart rate setting.
During the
HEART RATE
program, your
heart rate will be
kept near a set-
ting that you
choose. Press the START/ENTER button. The
PULSE display will show the current heart rate set-
ting of the program, in beats per minute. The flash-
ing CALORIES display will show the current heart
rate setting as a percentage of your maximum pos-
sible heart rate (your maximum possible heart rate
is 220 minus your age). If desired, you can change
the percentage by pressing the HEART RATE but-
tons. Each time one of the buttons is pressed, the
percentage will change by 5%. The percentage can
be from 60% to 85%. As the percentage is changed,
the heart rate setting shown in the PULSE display
will also change.
HOW TO USE THE HEART RATE PROGRAM
2
1
3
4
6
5
14
7
Press the START/ENTER button or the SPEED
Ò+Ó button to start the program.
When the button is pressed, the SPEED display will
flash and a tone will sound twice. If the incline of the
treadmill is higher than 1.5%, it will automatically
decrease to 1.5%. After a moment, the walking belt
will begin to move at 1.5 mph. Hold the handrails
and begin walking.
As you exercise, a tone will sound after each one-
minute period of the program (after one minute, after
two minutes, etc.). The speed and/or incline of the
treadmill will also change periodically to keep your
heart rate near the predetermined setting of the pro-
gram. The TIME/PACE display will show the time
remaining in the program. Near the end of the pro-
gram, the walking belt will slow to allow you to cool
down. During the last ten seconds of the program,
the incline will decrease to 1.5%. When no time
remains, the walking belt will slow to a stop.
If your heart rate is not detected during the program,
the letters ÒPLSÓ will flash in the PULSE display. (See
Heart Rate Monitor Trouble-shooting on page 8.) The
speed and/or incline of the treadmill may also auto-
matically decrease until your heart rate is detected.
To stop the program momentarily, press the STOP
button. The displays will pause and the TIME/PACE
display will begin to flash. To restart the program,
press the START/ENTER button or the SPEED Ò+Ó
button. To end the program, hold down the STOP
button for two seconds.
Note: Minor adjustments can be made to the speed
or incline of the treadmill during the program with
the SPEED or INCLINE buttons. However, if you
increase the speed, the incline will automatically
decrease; if you decrease the speed, the incline will
increase. If you increase the incline, the speed will
decrease; if you decrease the incline, the speed will
increase. The console will always attempt to keep
your heart rate near the predetermined setting.
When the incline reaches the lowest setting, the
speed cannot be increased any further. When the
incline reaches the highest setting, the speed can-
not be decreased any further.
Follow your progress with the five displays.
See step 8 on page 13.
When the program is completed, remove the
key from the console.
Make sure that the incline of the treadmill is set
at 1.5%. Remove the key from the console. Store the
key in a secure place. In addition, press the on/off
switch to the off position. (See the drawing near the
top of page 12.)
8
9
10
15
16
The five INCLINE programs automatically control the
incline of the treadmill during your workout. The graphs
labeled P3, P4, P5, P6, and P7 on the console show
how the incline will change during the HIKER, AERO-
BIC CROSS TRAINER, INTERVAL, MARATHON, AND
ADVENTURE TRAIL programs. Follow the steps below
to use an INCLINE program.
Plug in the power cord.
See step 1 on page 12.
Insert the key fully into the console.
See step 2 on page 12.
Put on the CardioTrack heart rate monitor if
desired.
For the PULSE display to show your heart rate, the
heart rate monitor must be worn. To put on the heart
rate monitor, see How to Use the CardioTrack Heart
Rate Monitor on page 8.
Select one of the INCLINE programs.
When the key is
inserted, the MANUAL
mode will be selected.
To select one of the
INCLINE programs,
press the PROGRAM
SELECT button repeatedly until a ÒP-3,Ó ÒP-4,Ó ÒP-5,Ó
ÒP-6,Ó or ÒP-7Ó appears in the TIME/PACE display.
(Program 3 is the HIKER program; Program 4 is the
AEROBIC CROSS TRAINER program; Program 5
is the INTERVAL program; program 6 is the
MARATHON program; program 7 is the ADVEN-
TURE TRAIL program.)
Enter your weight if desired.
When an INCLINE
program is selected,
the current weight
setting will begin to
flash in the SPEED
display. Although it is
not necessary to enter your weight to use an
INCLINE program, the CALORIES display will be
more accurate if your weight is entered. To enter
your weight, press the WEIGHT buttons. If you have
already entered your weight, or if you do not want to
enter your weight, go to step 6.
Press the START/ENTER button or the SPEED
Ò+Ó button to start the program.
When the button is pressed, the SPEED display will
flash and a tone will sound twice. If the incline of the
treadmill is higher than 1.5%, it will automatically
decrease to 1.5%. After a moment, the walking belt
will begin to move at 1.0 mph. Hold the handrails
and begin walking.
As you exercise, the incline of the treadmill will peri-
odically change as indicated by the graphs labeled
P3, P4, P5, P6, and P7 on the console. The speed
of the walking belt can be changed as desired dur-
ing the program with the SPEED buttons. The
TIME/PACE display will show the time remaining in
the program. During the last three minutes of the
program, the walking belt will slow to allow you to
cool down. During the last ten seconds of the pro-
gram, the incline will decrease to 1.5%. When no
time remains, the walking belt will slow to a stop.
To stop the program momentarily, press the STOP
button. The displays will pause and the TIME/PACE
display will begin to flash. To restart the program,
press the START/ENTER button or the SPEED Ò+Ó
button. To end the program, hold down the STOP
button for two seconds.
Note: While the program is in progress, the difficulty
level of the program can be adjusted, if desired, with
the INCLINE buttons. Press the INCLINE Ò+Ó button.
A number will flash in the INCLINE/DISTANCE
display for three seconds. This number is the
maximum incline that the treadmill will reach during
the program. Press the INCLINE Ò+Ó button again.
Each time the button is pressed, the maximum
incline setting and all other incline settings of the
program will increase slightly. The INCLINE ÒÐÓ
button can be used in the same way to decrease the
difficulty level of the program.
HOW TO USE THE INCLINE PROGRAMS
2
1
3
4
5
6
17
Follow your progress with the five displays.
See step 8 on page 13.
When the program is completed, remove the
key from the console.
Make sure that the incline of the treadmill is set
at 1.5%. Remove the key from the console. Store
the key in a secure place. In addition, press the
on/off switch to the off position. (See the drawing
near the top of page 12.)
HOW TO SELECT THE INFORMATION MODE
The console features an information mode that keeps
track of the total time and distance accumulated on the
treadmill. To access the information mode, hold down
the STOP button, insert the key into the console, and
then release the STOP button after about two seconds.
The TIME/ PACE display
will show the total number
of hours accumulated on
the treadmill.
The INCLINE/DISTANCE
display will show the total
number of miles accumu-
lated on the treadmill. If
the number exceeds 999,
the thousands and ten
thousands digits will be shown in the SPEED display.
The PULSE display will
show an ÒE,Ó for English
(miles), or an ÒM,Ó for
Metric (kilometers). The
console will display speed
and distance in the unit of
measurement shown. Pressing the SPEED Ò+Ó button
will change the unit of measurement.
To exit the information mode, remove the key from the
console.
8
7
How to Fold and Move the Treadmill
HOW TO FOLD THE TREADMILL FOR STORAGE
Before folding the treadmill, adjust the incline to the
lowest position. Next, unplug the power cord. Caution:
You must be able to safely lift 45 pounds (20 kg) in order
to raise, lower, or move the treadmill.
1. Hold the treadmill with your hands in the locations shown
at the right. To decrease the possibility of injury, bend
your legs and keep your back straight. As you raise
the treadmill, make sure to lift with your legs rather
than your back. Raise the treadmill halfway to the vertical
position.
2. Move your right hand to the position shown and hold the
treadmill firmly. Raise the treadmill until the frame passes
the storage latch. Make sure that the storage latch is
inserted into the slot in the side of the frame.
To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of
direct sunlight. Do not leave the treadmill in the
storage position in temperatures above 85¡
Fahrenheit.
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the
storage position as described above. Make sure that the
storage latch is inserted into the slot in the side of the
frame.
1. Hold the handrails of the treadmill as shown. Place one
foot on the base in the indicated location. Do not hold or
push on the book holder or the book holder may be
damaged.
2. Tilt the treadmill back until it rolls freely on the front wheels.
Carefully move the treadmill to the desired location. Never
move the treadmill without tipping it back, or the base
pads may come off. To reduce the risk of injury, use
extreme caution while moving the treadmill. Do not
attempt to move the treadmill over an uneven surface.
3. Place one foot on the base, and carefully lower the tread-
mill until it is resting in the storage position.
Base
Front Wheels
Storage
Latch
Slot
18
Book Holder
HOW TO LOWER THE TREADMILL FOR USE
1. Hold the upper end of the treadmill with your right hand as
shown. Using your left thumb, press the storage latch to
the left. Pivot the treadmill until the frame and foot rails
are past the storage latch.
2. Hold the treadmill firmly with both hands, and lower the
treadmill to the floor. To decrease the possibility of
injury, bend your legs and keep your back straight.
Storage Latch
19
Maintenance and Trouble-shooting
Most treadmill problems can be solved by following the simple steps below. Find the symptom that
applies, and follow the steps listed. If further assistance is needed, call our Customer Service Department
toll-free at 1-888-825-2588, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).
1. SYMPTOM: THE POWER DOES NOT TURN ON
a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged
into a properly grounded outlet (see page 10). Use only a single-outlet surge suppressor that is UL 1449
listed as a transient voltage surge suppressor (TVSS). The surge suppressor must have a UL suppressed
voltage rating of 400 volts or less and a minimum surge dissipation of 450 joules. The surge suppressor
must be electrically rated for 120 volts AC and 15 amps.
b. After the power cord has been plugged in, make sure that the key is fully inserted into the console. (See step
2 on page 12.)
c. Check the circuit breaker located on the treadmill near the
power cord. If the switch protrudes as shown, the circuit
breaker has tripped. To reset the circuit breaker, wait for five
minutes and then press the switch back in.
d. Check the on/off switch located at the front of the treadmill
near the power cord. The switch must be in the on position.
2. SYMPTOM: THE POWER TURNS OFF DURING USE
a. Check the circuit breaker located on the treadmill frame near the power cord (see 1. c. above). If the circuit
breaker has tripped, wait for five minutes and then press the switch back in.
b. Check to make sure that the on/off switch is in the on position. (See 1. d. above.)
c. Make sure that the power cord is plugged in.
d. Remove the key from the console. Reinsert the key fully into the console. (See step 2 on page 12.)
e. If the treadmill still will not run, please call our Customer Service Department toll-free.
3. SYMPTOM: AN ERROR CODE (ÒE1,Ó ÒE20,Ó ÒE21,Ó ÒE22,Ó ÒE23,Ó OR ÒE24Ó) APPEARS ON THE CONSOLE
a. If the console detects an incline error, an ÒE1Ó may appear in the INCLINE/DISTANCE display when the
INCLINE buttons are pressed, and when the display shows the current incline level. If this error code
appears, remove the key from the console, wait for ten seconds, and then reinsert the key. If the error code
appears again, call our Customer Service Department. Do not operate the treadmill until the problem is
corrected.
b. If the console detects a speed error (no speed signal, an erratic speed signal, etc.), an ÒE20,Ó ÒE21,Ó ÒE22,Ó
ÒE23,Ó or ÒE24Ó may appear in the SPEED display. If one of these error codes appears, remove the key
from the console, wait for ten seconds, and then reinsert the key. If the error code appears again, call our
Customer Service Department. Do not operate the treadmill until the problem is corrected.
Tripped
Reset
Tripped
c
Reset
On
Position
d
20
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
