Saitek M40T Owner's manual

Page is loading ...

Powering the mouse on/off

The mouse will automatically switch itself on when you insert new

batteries. To save battery power when not using the mouse, press the

power button on the underside and hold for for 3~5

seconds.To restart the mouse press the button once.

The mouse LED flashes blue to indicate the batteries

are running down. When this happens replace the

batteries.

Troubleshooting

If the mouse does not work:

1 Check the batteries have not expired and are inserted properly.

2 Make sure the mouse is switched on by pressing the button on the

underside.

3 Check the nano receiver is properly inserted in one of your PC’s USB ports.

4 Insert the nano receiver in another of your PC’s USB ports.

Important Information

Some experts believe that using any mouse or trackball may cause serious

injury to hands, wrists, arms, neck, or back. If you feel pain, numbness, or

weakness in these areas, please consult a qualified health professional

immediately.

To reduce the risk of injury, please follow these precautions:

• Take frequent breaks, get up and walk around several times every hour.

• Vary your tasks throughout the day.

• Keep your shoulders relaxed with your elbows at your side. Position your

keyboard and mouse so you do not have to reach.

• Adjust your chair and keyboard so your upper arms and wrists are straight.

• Avoid resting your wrists on sharp edges.

Technical Support

Can't get started - don't worry, we're here to help you!

Nearly all the products that are returned to us as faulty are not faulty at all - they

have just not been installed properly.

If you experience any difficulty with this product, please first visit our website

www.saitek.com. The technical support area will provide you with all the

information you need to get the most out of your product and should solve any

problems you might have.

SAITEK M100X MINI WIRELESS MOUSE

System Compatibility

PC running Windows XP/XP64/Vista/Mac OS X

Installation

1

2

3

4

5

6

Press the clip on the

underside of the mouse.

Unclip the battery cover. Slide the cover back to

expose the battery

compartment.

Unclip the nano wireless

receiver.

Insert the nano wireless

receiver in one of your

PC’s USB ports. With

your PC switched on,

follow the device

installation wizard to

complete the installation

of the new USB device.

Insert the batteries in

the compartment in the

direction shown and

replace the cover.

PM56_manual.qxd 14/08/2008 14:25 Page 2

If you do not have access to the internet, or if the website cannot answer your

question, please contact your local Saitek Technical Support Team. We aim to

offer quick, comprehensive and thorough technical support to all our users so,

before you call, please make sure you have all the relevant information at hand.

To find your local Saitek Technical Support Center, please see the separate

Technical Support Center sheet that came packaged with this product.

Information for Customers in the United States

FCC Compliance and Advisory Statement

Warning: Changes or modifications to this unit not expressly approved by the

party responsible for compliance could void the user's authority to operate the

equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1 This device may not cause harmful interference, and;

2 This device must accept any interference received, including interference

that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna;

• Increase the separation between the equipment and receiver;

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected;

• Consult the dealer or an experienced radio/TV technician for help.

Saitek Industries, 2295 Jefferson Street, Torrance, CA 90501, USA

Canada ICES-003

Operation is subject to the following two conditions:

1 This device may not cause interference, and;

2 This device must accept any interference, including interference that may

cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du

Canada.

Battery Information

• 2 AAA rechargeable batteries (included)

• Must be disposed of properly

• May explode if damaged or disposed of in fire

• Do not short circuit

Importer's Declaration of Conformity

Authorised representatives address:

Saitek plc

4 West Point Row

Great Park Road

Almondsbury

Bristol

United Kingdom BS32 4QG

Identification of Equipment:

Saitek M100X Mini Wireless Mouse

Intended usage:

For home use

Conformity specification:

Reference to European harmonised standards

EN60950-1:2002

EN 300 220-3:2000

EN 301 489-3:2002

Technical Construction File Ref.: PCID/PM56

The above equipment conforms to the essential requirements of the following

directive:

PM56_manual.qxd 14/08/2008 14:25 Page 4

6 When returning the product for repair, please pack it very carefully,

preferably using the original packaging materials. Please also include an

explanatory note.

7 IMPORTANT: To save yourself unnecessary cost and inconvenience, please

check carefully that you have read and followed the instructions in this

manual.

This warranty is in lieu of all other expressed warranties, obligations or

liabilities. ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES,

INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,

SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS

WRITTEN LIMITED WARRANTY. Some states do not allow limitations on

how long an implied warranty lasts, so the above limitations may not apply

to you. IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL OR

CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER

WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some states do not

allow the exclusion or limitation of special, incidental or consequential

damages, so the above limitation may not apply to you. This warranty gives

you specific legal rights, and you may also have other rights which vary from

state to state.

This symbol on the product or in the instructions means that

your electrical and electronic equipment should be disposed

at the end of its life separately from your household waste.

There are separate collection systems for recycling in the

EU.

For more information, please contact the local authority or your retailer

where you purchased the product.

1999/5/EC EC Radio and Telecom Terminal Equipment directive

The essential requirements the above equipment conforms to are:

Article 3.1a (Safety)

Article 3.1b (EMC)

Article 3.2 (Use of radio spectrum)

Limitations of frequency usage:

Countries in which this product may not be sold/used:

Signed: Andrew Young

Position: Engineering Director

Date: 1 August 2008

Company: Saitek plc

Place: United Kingdom

Conditions of Warranty

1 Warranty period is 2 years from date of purchase with proof of purchase

submitted.

2 Operating instructions must be followed.

3 Specifically excludes any damages associated with leakage of batteries.

Note: Batteries can leak when left unused in a product for a period of time,

so it is advisable to inspect batteries regularly.

4 Product must not have been damaged as a result of defacement, misuse,

abuse, neglect, accident, destruction or alteration of the serial number,

improper electrical voltages or currents, repair, alteration or maintenance by

any person or party other than our own service facility or an authorized

service center, use or installation of non-Saitek replacement parts in the

product or the modification of this product in any way, or the incorporation of

this product into any other products, or damage to the product caused by

accident, fire, floods, lightning, or acts of God, or any use violative of

instructions furnished by Saitek plc.

5 Obligations of Saitek shall be limited to repair or replacement with the same

or similar unit, at our option. To obtain repairs under this warranty, present

the product and proof of purchase (eg, bill or invoice) to the authorized

Saitek Technical Support Center (listed on the separate sheet packaged with

this product) transportation charges prepaid. Any requirements that

conflict with any state or Federal laws, rules and/or obligations shall not be

enforceable in that particular territory and Saitek will adhere to those laws,

rules, and/or obligations.

!

1313

PM56_manual.qxd 14/08/2008 14:26 Page 6

Page is loading ...

M100X Mini Wireless

Mouse

www.saitek.com

All trademarks are the property of their respective owners.

V.1.0 01/08/08

PM56

Saitek

®

PM56_manual.qxd 14/08/2008 14:26 Page 28

Saitek M40T Owner's manual

Saitek M40T Owner's manual

in other languages

Related papers

Other documents