Product Number 6G3B10
Technical Specifications
Compatibility
The Multimedia Base is compatible with the following monitor:
• 105S1x
• 105B1x
• 107S1x
• 107B1x
• 109S1x
• 109B1x
Amplifier
• RMS Power 2x1.5W
• PMPO Power 36 Watts
• Input Signal Level 340 mV RMS
• Bass Boost
Speakers
• Unit Diameter 2"
• Impedance 4Ω
• Frequency Response 140Hz-20kHz
• Dual Passive Bass Pipes
Option
USB Hub PCUH411 Clip-On Option
Adapter
• Input (6G3B10/74) 108~132 VAC, 60Hz,0.1A (10W)
• Output: 9 VDC, 600mA
Regulatory Approvals
•UL
• CSA
•CE
• TCO ’99
Physical Specifications
• Dim.(Excl. Swivel)(WxHxD)(mm) 239 x 54 x 208
• Dim.(Excl. Swivel)(WxHxD)(inch) 9.4" x 2.1" x 8.2"
• Additional Height for Monitor 28 mm/1.1"
(Multimedia Base-Normal
Base)
• Weight 0.9 kg/2.0 lbs.
• Additional Weight for Monitor 0.5 kg/1.1 lbs.
(Multimedia Base-Normal
Base)
• Power Consumption 5 Watts
• UPC Code 0 37849 89239 8
• Carton Dimensions (WxHxD)(mm) 239 x 54 x 208
• Carton Dimensions (WxHxD)(inch) 12.8" x 9.8" x 4.5"
• Carton Weight 1.4 kg/3.1 lbs.
Connections and Cables
• Headphone Connection 3.5mm jack
• Microphone Input 3.5mm jack
• Microphone Output 3.5mm jack
• Audio Cable 1.8M,3.5mm jack to 3.5mm jack
This monitor fulfills all Nutek requirements regarding power management
All trademarks acknowledged.
Printed in the U.S.A.
©1999 Philips Consumer Electronics Co.
A Division of Philips Electronics North America Corp.
99177 KID Design,Philips Consumer Electronics Co.
INTERNET ADDRESS: http://www.pcstuff.philips.com
FAX INFORMATION SYSTEM: (423) 521-4341
TECHNICAL SUPPORT: (877) 835-1838 (USA)
(903) 242-4804 (outside USA)
Multimedia Base
6G3B10
Specifications subject to change without notice
The Multimedia Base
replaces the easily
removable standard
pedestal of the monitor.
The Multimedia Base
increases the height of the
product by only1.1"(3 cm).