FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
Rev. 2/07
ADA
ICON™ MOENTROL®
Single-Handle Tub/Shower Trim Only
Models: T2156, T2156BB, T2156BN
7" (178mm)
ESCUTCHEON
DIAMETER
2" CC
(
51mm
)
1 7/8" IPS (48mm)
MAX WALL
HOT
INLET
COLD
INLET
FINISHED WALL LINE
FACE OF STUD
4-1/2" (114mm)
WALL OPENING
FLOOR
45" (1143mm)/
48" (1219mm)-SHOWER
32" (813mm)-TUB OR
TUB SHOWER
7-1/2"
(191mm)
MIN
TUB RIM
6'-6"
(1981mm)
L
C
1-3/8" (35mm)
2-1/16" MAX. (52mm)
1-7/16" MAX. (37mm)
1/2" MIN. CC (13mm)
5/8" MIN. IPS (16mm)
3-1/2”
(89mm)
5-7/8”
(149mm)
8-13/16”
(224mm)
7-5/16”
(186mm)
FAUCET DESCRIPTION
• Metal construction with chrome plated, LifeShine® brushed
bronze or LifeShine® brushed nickel finishes
• Includes showerhead, arm, flange and diverter spout
OPERATION
• Lever style handle with temperature indicator on the
escutcheon, pull-on/push-off operation
• Temperature operates through an 180° arc of handle
travel (full cold to full hot)
• Adjustable temperature limit stop to control maximum
hot water temperature
• Pressure balancing mechanism maintains selected
discharge temperature to ± 2°
FLOW
• Showerhead limited to 2.5 gpm (9.5 L/min)
CARTRIDGE
• 1225® cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified to meet: CSA B-125, ASME A112.18.1M,
ANSI A117.1 and all applicable requirements referenced therein
WARRANTY
• Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
-
1
Moen T2156BB User manual
- Category
- Faucets
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
