Honey-Can-Do GAR-01702 Installation guide

GAR-01702

2-tier chrome adjustable

garment rack

74 in H x 46 in W x 19 in D

(188 cm H x 116.8 cm W x 48.3 cm D)

www.honeycando.com | sales@honeycando.com | 877.2.I.can.do (877.242.2636)

Honey-C an-Do2

PARTS LIST

PART/ILLUSTRATION (QTY) DESCRIPTION

(2) outside lower uprights

29.5” in L x 1” in Dia. one end has a hole that is on

the tapered portion and only goes through one

wall of the pole - this the end that goes up. The

other end has the hole past the tapered portion

and has a hole that goes through both sides of the

pole - this is the bottom.

(1) center lower upright

20.7” in L x 1” in Dia. only one end tapered - up

this pole has no holes drilled into it

(2) upper cross poles

43” in L x 1” in Dia. no holes drilled - does have

threaded insert on each end.

(2) base cross bars

43.35” in L x .75” in Dia. no holes drilled - does

have threaded insert on each end.

(1) left upper support pole

41.25” in L x 1” in Dia. no taper - end with single

hole is the top. The other end has four holes it is

the bottom.

(1) right upper support pole

41.25” in L x 1” in Dia. one end has hole drilled

through both sides -this is the top. Other end has

hole through only one side - bottom

(1) center support pole

37.5” in L x 1” in Dia. end with no hole is top. end

with 3 holes is bottom

(2) base

honeycando.com 3

(1) center hanger bar

22.75” in L x 1” in Dia. J and K make the center

hanging bar. Has threaded insert in one end. This

goes on the inside and attaches to one of the

holes in H. Customer selects the desired hole

based on what height they want the center hang-

ing bar.

PARTS LIST

J

K

L

M

N

O

P

Q

PART/ILLUSTRATION (QTY) DESCRIPTION

(2) locking wheels

(2) wheels

(4) base and cap

(2) center support coupler

(2) upright end cap

(2) base/outside upright

2.25” bolts

(1) insert to J

21.5” in L x .75” in Dia. End with threaded insert

goes toward outside and attaches to F at desired

height. Must line up with where J is attached on

opposite side.

Honey-C an-Do4

PARTS LIST

PART/ILLUSTRATION (QTY) DESCRIPTION

T

U

(1) center hanger bar lock

(5) cross bar/hanger bar bushing

R

S

(10) medium 2” bolts

(4) short .5” bolts

hex wrench

wrench

V

TOOLS LIST

PART/ILLUSTRATION DESCRIPTION

W

honeycando.com 5

ASSEMBLY

STEP 1

N

STEP 2

R

Honey-C an-Do6

ASSEMBLY

STEP 3

Q

honeycando.com 7

ASSEMBLY

STEP 4

R

U

RU

S

O

J

R

H

R

U

Honey-C an-Do8

S

ASSEMBLY

STEP 5

honeycando.com 9

ASSEMBLY

STEP 6A

R

K

T

J

R

U

STEP 6B

J

T

K

Honey-C an-Do10

S

O

R

U

P

ASSEMBLY

STEP 7

R

U

honeycando.com 11

ASSEMBLY

STEP 8

L

M

L

M

130228

LIMITED LIFETIME WARRANTY

Honey-Can-Do International, LLC (HCD) warrants its products will

be free from defects in materials and workmanship when used for

normal personal or household use, except as provided below. HCD,

at its option, may oer a comparable product or oer a replacement

part or request that the item be returned to the place of purchase.

This warranty DOES NOT apply to damage caused by negligence,

misuse, excessive use, improper cleaning, improper assembly,

or any circumstances not directly attributable to manufacturing

defects. Proof of purchase is required in the form of a receipt (copy

or original) to validate warranty. HCD provides this limited lifetime

warranty in lieu of all other warranties either express or implied.

In no event shall HCD, its aliates, or subsidiaries be responsible

for consequential or incidental damages arising out of a claim of

defective product. Some states or provinces do not allow some

exclusions or limitations, so the above statement may not apply

to you. This warranty gives you speciﬁc legal rights, and you may

also have other rights, which vary by state or province.

Honey-Can-Do GAR-01702 Installation guide

Honey-Can-Do GAR-01702 Installation guide

Related papers

Other documents