QSG17
_
06074 082817
* Cold temperatures can cause alkaline batteries to function improperly. Use lithium batteries for temperatures below -4°F (-20°C).
1. Remove battery compartment cover from the
bottom of the AcuRite
®
Atlas
TM
outdoor device.
Remove batteries if currently installed.
REMOVE BATTERY
COMPARTMENT COVER
Battery Pack for AcuRite
®
Atlas
TM
Model 06074:
INSTALL BATTERIES
5. Insert 4 x AA alkaline or lithium* batteries into
the battery compartment. Heavy duty or
rechargeable batteries are not recommended.
4. Remove the battery pack cover by pulling
upward on the cover’s tabs (away from the
battery pack).
REMOVE BATTERY PACK COVER
2. Plug the battery pack cord into the battery
compartment AcuRite
®
Atlas
TM
.
INSERT BATTERY PACK CORD
6. Replace the battery pack cover.
REPLACE COVER
7b. Use the included zip ties and hardware to
secure excess cable near the battery pack,
leaving enough slack for a “drip-loop,”
preventing rain water from trailing into the
battery pack. Installation is complete.
SECURE CABLE
7a. Mount the battery pack using the integrated
hang holes. We recommend mounting on a
pole or a flat surface such as a wall or post.
The battery pack is water-resistant and is
designed for general outdoor use.
MOUNT BATTERY PACK
3. Loop the cord through the slot, then replace the
battery compartment cover.
LOOP CORD AND REPLACE
BATTERY COMPARTMENT COVER
-
1
AcuRite Atlas 06074 Battery Pack User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
AcuRite Power Adapter for AcuRite Atlas User manual
-
-
-
-
-
-
-
-
AcuRite 00634A2 User manual
-