3M Surfacemount Header, N4600 Series Important information

Type
Important information
Product Change Notice
3M™ Headers, N3000, N4600, N2500 Series .100” Pitch,
Beige Resin Color Change
Issue Number: 765
Date: June 30, 2010
Product Change
In order to improve manufacturability, 3M is changing the standard color of non-RoHS compliant*, high
temperature headers in our N3000, N4600 and N2500 .100” Pitch Header Series product lines from beige
to black. The resin material – PCT - remains unchanged. Existing process and electrical specifications, as
well as dimensions remain unchanged. High temperature RoHS compliant parts are already black and thus
remain unchanged. Note that part numbers will NOT change. Affected tech sheets are: TS0772, TS0771,
TS0774, TS0773, TS0770 and TS0168. They will be updated to reflect this change.
3M will accept last time purchases for the beige color material until 5:00 PM Central US time, August 30,
2010. All orders received by 3M after this date will be shipped with black parts. Customers who require
support for the beige resin beyond the stated last time buy date must contact 3M in writing by close of
business on August 31, 2010. In some instances it may be possible to support special extension requests.
Extensions may be granted where possible, at 3M's discretion.
Affected part numbers:
Stock
Number
Part Number
80610711535 N4660-2000
80610711501 N4650-2000
80610711477 N4640-2000
80400016277 N4634-2001
80610711444 N4634-2000
80610711410 N4626-2000
80610711386 N4620-2000
80610711352 N4616-2000
80610711329 N4614-2000
80610711311 N4610-2350
80610711303 N4610-2250
80610711295 N4610-2050
80001201773 N3793-5503
80400016087 N3764-5502UG
80400014934 N3627-6603UG
80000911109 N3505-2
80000917577 N3440-5602
80400006773 N3433-D603
80400006773 N3433-D603
80001203738 N3433-6303
80000915852 N3432-6602
Product Change Notice
3M™ Headers, N3000, N4600, N2500 Series .100” Pitch, Beige Resin Color Change
Stock
Number Part Number
80001203647 N3432-6303
80620117939 N3431-L503
80620117939 N3431-L503
80400026912 N3431-5303
80000912446 N3431-1202
80000911976 N3429-6003UG
70010000324 N3428-5503
80400025039 N3428-2603
80400004240 N3408-6503
80400027175 N3372-D002
80610522601 N3372-5603
78812629547 N3372-1002UB
80000904641 N3314-5502UG
80610462311 N2564-7H02UB
80000916181 N2564-6003UB
80610462345 N2560-6003UB
80000911729 N2550-7003UB
80400013985 N2550-6003UG
80610370787 N2540-7H0210UN
80610370787 N2540-7H0210UN
80610477772 N2540-5002UG
80400004836 N2536-7002UB
80400000693 N2534-70K2UB
80610375935 N2534-6003UB
80400002103 N2530-70K2UB
80000910242 N2530-6002UB
80610466684 N2526-7002UB
80400018471 N2526-600FUB
80620116733 N2524-7002UG
80610374128 N2524-6002UG
80610374243 N2520-7HK2UG
80610373955 N2520-6002UG
80001201526 N2516-7002UB
80400001519 N2516-6003UG
80610377162 N2514-6002UG
80000912073 N2510-7002UB
80610372775 N2510-5003UB
80001218900 N10250-CES80004
Product Change Notice
3M™ Headers, N3000, N4600, N2500 Series .100” Pitch, Beige Resin Color Change
Contact Information
In the USA
3M US Customer Service
800-225-5373
Outside the USA
Please contact your local 3M subsidiary or authorized distributor. Visit www.3Mconnector.com and click
“Where to Buy.”
*"RoHS Compliant 2002/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive
2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. This information represents 3M's
knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
Warranty stated below.
3M is a trademark of 3M Company.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not
guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such
use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force
or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT
NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period
stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by
law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
3
Electronic Solutions Division
Interconnect Products
6801 River Place Blvd.
Austin, TX 78726-9000
1-800-225-5373
www.3Mconnector.com © 3M 2010 All Rights Reserved.
  • Page 1 1
  • Page 2 2
  • Page 3 3

3M Surfacemount Header, N4600 Series Important information

Type
Important information

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI