2. Computers & electronics
  3. Computer cables
  4. Signal cables
  5. Roland
  6. M-480
M-480

Roland M-480 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Roland M-480 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Functionality added in M-480 version 1.002
●
The Auto MDI/MDI-X function has been added.
This function automatically detects the type of the connected Ethernet cable (Crossover or Straight) and configures the connection appropriately.
By enabling this, both Crossover and Straight Ethernet cable can be supported for REAC connection.
1.
In the SETUP section, hold down [SYSTEM] and turn the power on.
The SYSTEM CONFIG screen will appear.
2.
Press [F4 (REAC)].
The REAC popup will appear.
3.
Press [ENTER] to check “Auto MDI/MDI-X”.
4.
Press [F8 (OK)].
5.
Turn off the power.
1PS
M-480_v1002Added_e.book 2 ページ ２０１１年６月２９日　水曜日　午前９時１６分
/