Dukane Vibration Butt Joint with External Flash Trap Design Guide

Type
Design Guide

This manual is also suitable for

Vibration Butt Joint with External Flash Trap
Customer Name: Date:
Application Number: Revision:
Project:
Material:
Prepared By: Email:
Dimension
General Guidelines
Recommended Size
A
Weld Rib Width
1.2W
B
Weld Rib Height
0.050" - 0.080" (1.25 mm - 2.0 mm)
C
Cosmetic Gap Height
0.020" - 0.040" (0.5 mm - 1.0 mm)
D
Vibration Clearance
0.040" (1.0 mm) minimum
M
Melt Down
0.040" - 0.060" (1.0 mm - 1.5 mm)
W
Wall Thickness
Minimum 0.120" (3 mm)
Collapsed
Dukane Corporation
Intelligent Assembly Solutions
2900 Dukane Drive
St. Charles, IL 60174
(630) 797-4900
http://www.dukane.com/us
us_caddata@dukane.com
W
B
A
C
M
D
  • Page 1 1

Dukane Vibration Butt Joint with External Flash Trap Design Guide

Type
Design Guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI