Craftsman 320.17256 Owner's manual

Brand: Craftsman

Model: 320.17256

Category: Circular saws

Type: Owner's manual

This manual is also suitable for

32017256

Craftsman 320.17256 is a 5.5 Amp scrolling sabre saw featuring a Laser Trac cutting guide compatible with most scroll saw blades for intricate cuts and patterns. The variable speed dial enables precise control for different materials and applications. It also provides a smooth, splinter-free finish with minimal vibration, and has a dust blower to keep the cut line clear. The built-in LED light enhances visibility in low-light conditions, and the pivoting shoe allows for angled cuts and plunge cuts.

Operator's Manual

IcRnFT Mnrl

5.5 Amp

Scrolling Sabre Saw

with Laser TracTM

Mode! Noo

320.17256

_CAUTION Read, understand and follow

ati Safety Rules and OparalJng tns_,ru_ons

_nthis m._nuaI before using this product

Sea's, Roebuck and Co_

Hoffman E_'t_te_ IL 60179 U.SJ_.

V_d! put Cr_ltsman webs_e: wv,'w_cr_tstnan_com

•WARRANTY

, SAFETY

• UNPACKING

• DESCRIPTION

• BLADE

INSTALLATION

• OPERATION

• ADJUSTMENTS

. M AfNTENANCE

Warran_................................................................. Page 2

Safety Symbols .................................................. Page 3

S,3fely tnslru_;_Dt'_ .............................................. Page_ 4 - 10

Glo_sa.,yofTinms ..............................................Pagc_.10 ..11

UnpacPJn_ ................................................................. Pag_ 1t - 12

De,,_,m'il_lJon.............................................. Pages t2 - 14

Btade. Instatlallen ......................................................... Page 14 * 16

Oparat_or_.................................................. Pages 17 - 27

Mainlenanl:_ .................................................................................... Pages :27 - 28

TroubleshoolJng ........................................................................ ,Page 29

A_ssorles ................................................................................... Page 2.9

Repab Parts. ........................................................................ Page_ 30 • 33

Se_ts R[_pair Pad:; Phone Numbers .................................... Back Corm'

ONEYF..AR F'ULL WARRAN-rY ON CRAFTSMANe PRODLICT

ItII'_SCmfl_n _odu_ failsdu_ Ioa d_feclin_t_lal or _ansf_ip

_in onr_Y'e_Item th_ _'_I_ofpu_cha_, RETURN ITTO TIIE NEAREST

SEARS STORE OR PART'SAND REPAIR CENTER OR OTHER

CRAFTSMAN OUTLET IN THE UNWED STA'_ S FOR FR_

REPLACEMENT..,

Th_s _anly does nolIndud_ r_ndable parlssuch ,_ lamps, b_ll_

b_s Dr I_ades.

Iithis CtalP.smi_produd is used lotcornmetd_ c__er_al purp_ this

warrant,/applies Io_rely 90 days l_:omlhe dal_ ol p_._chase,_

T'r_s v_tra_ty {_ht_ you specilic t_gal rtght_ and _ tz_'ryalso h_'vaeother

rlg)'_,whichvaryIr_m st_Ioto _a1_.

Sews- Re,chuck and C_. H_flm_n F.,,_ale,s, IL 60179

SAVI_THESE INS'II_IU CTIONSl

READ ALL IHsTRUCTIONSt

The purpose of _fe_ _ym_L_ t,_to att_ct your anen_ion to pos_,tble d._nger_

The safe_ _'ymboL_ t_,d _e exptana_o_s v._lh lhem. deserve _ur care[ul af_ention

and uede_nding.The symbol warnings DO NOT by I_em_eive_ eliminate _ny

d_,nger, The in_tru¢_o_ and warnings lhW g_o are no _ub_li_te_ lot p_eper

accident preve hi[on me,sums

/_ WARNIN G: BE SURE to _e.qd and undt_zmnd ,_tI =*_lfrd¥ Ix_st/_lOrl_ In this I

_nuai IltcJudln galt =atoty lile_ _ymboh; =uch _ "DANGER* "WARNING* lind

"_U'R ON'_ _EFORE t_ir_g [_r, saw. F=r_l_ to Ir_l_w =l! fn_lonp_ ilsled b_tow

mt_y msu I n • eC_lr¢lifm_, fbe and/m smUDge p_en=l tn|uty,

SAF"_Et'Y PRECALrI'IONS FOR LASERS

pr e..r,_t ,_n op_-al _ Howevo_, DO NCR _,,.'._o _ the b_m a._ this r_n _u,._

Ti_ f_lowir_gI_Ix_II_on your I_oL

SURE U=at any bysta ndem In the _¢inlty _._ w _ ===_ _'_ _ ===_ _== a

SAFETYPRECAUTIONSFORLASERScoral

[ n, CAUTiON: ALWAYS foffow_tyth_Z.-_tru_,_ c_t_tr_dt, thl=_nu=! l

whet= t =,rdr_j thI_, t+ll_er+U,_o ut th_ f_tum }n uny manner other th_n wh_l appear=

in t_, rranl._l _y re_t.dt _ _ p..3,zaz,dous _ dL_UOn p.Xposum+

L_DO NOT all ell_pt _ modiiy !ho pz}ftormBr¢;o r_ t)l;t_laser devi_ in nny way.

This may +_.sull _ a danQcmus e,_os_Jro to t.ts_ radlaUon

9 ALWAYS use _ lho n,ccu=orle._ th_! _ro recommended by Se_s l_;' ._rm_

w_h I_; p_u_t Uc,o _ _,_=te; _ h;wo br_ _o_ned for L_O with

oth¢r [asU t+O_ _+:+¢d +o._+Jnin +mri_u:s _JlJry.

_0 For fur|h_' information reg;_ing !_._e._ rutc_ !o ANS;+Zl_36.1 The 5"TAf_DARD

FOR THE SAFE USE OF LASER_ article 1l_J+nthe I+_ t+f I_P_tJte a! Am ,Jrt_.u

ELECTRt_;ALSAF_-TY €onL

I _ WARNING" Doubl_ ,n_u., on DOF.._ NOT _.lm th_ pl=co of n_I _;.._t'.tY t

pmcal_or_ when np_r=ttng this tooL,

3. B EFORt_ pl_JgD_n_ tl_th_ _n_, BE SURf thai Iho nu_le! vo_lage =;uppli_d is with In

_o v_a,'je ma_kxd on the teer_ d_t,'z plate. DO _IOT urn._"PC nn_y" r_lcd t_Ls

4,AVOID body contact w_ grounded =urla_, _h _ pIp_r_ _dlaI_z; rangn,,',';

and {_frigerot_+_. Thee is an ir_cr x_._._'d dsk ot eIe_ri¢ r,hc_ If y_r b_y

S. DO NOT expose pow_' t_9_ to r_n or w_t €_n_Ionn or n_ power tools

In w_t or d_mp loc._t_nn:_.Wo.tO_ enl_'i_g a p_Wor toolw_ i_€_'n_se _. Hr_

6. INSP£CT too] €o_'ff._ for d,_m,_ge. Haw d_na_od t_l c_ d._ repaired a_:a _ o._._s

S_m._ Centre. B£ S_RE t_ _L,'_y c_r_y awa_x _ the c_d _oc.._1_'_and _xp

It_._ _way fr_r_ the m_ng b_=de.

7 DO NOT nbu_ t_'_ cord, NEVF-R ur_ the _n_l to carP/the 1ooiby or to pull

the ping from thx _uL_ L !'_ c_d away f_nm haat. o_t, sh_lp edgeS _ m_ng

p_rt_ Ropta¢o d0magod cc_d_ &nm_iate_ Damaged o:_:dsincr_._o the r_k of

I_ENSION CORDS

UCO a proper oxto_ton ¢o_d. ONLY usn €ords lisled by Und_r_witors

I_b==t_._ {UL), C_te_ e..xlendon c_ds can canso a drop tn line volta gx, _o_ll_g

_ I_._ nl power _md ov_dma_n_ d tooL F_ this _ an AWG lAmoric_n Wire

Gaugo) _ _ at le_t 14.gaugo is _'ec_mmend0d for a=i mind.,1 co_'d ol 25-1L Ot

le_s in !_g_h, U_ 12-g at_ge lu an _n_on c_d _t 50-ft. Extension cord_ 100"R.

or Iongl0r aro not recommended. Remm-_b r._'.a _rn.3ger wiro gauge n_ h_

gr_r ¢opa c|b/U-,_n n I,_n3xr _urnber ('_ *gang_ wi_'xhas m_m capacily than

16-g_Uge wi_e; 1;_-gaugn w_x _ more cap._city than 14-gangn), When IndoI._l

use th_ _matt_r ntm_boi, W)_n opcsa_n($ a pownr toc_ out d_,.% L_O an _Uldoo_

m_ens!c,n c_d n_ked "W-A" _ _ Th_ co_d_ _r_ _alod to,"_Jtd_c_ u_ and

_c-.duco th_ rL_ _ elx=trt_ _

L_ CAUTION: K_mp the _fJ:m_ton _n_ denr of the t_._rking a_,'_. P¢IIt_.

the cord _o that tt v,_Itnut get I_ught on lumber, toot_, or other ob_tructlom:

I wh e you _m woddng with a pm_t tool

I L_ WAR NING: C_ed_ ext_r',_oo cord_ Ix_m earth m.e. If darr=ged mpt_r_

SYM B _...S FOR YDUR TOOL

The I_I On BUr tolml_¥ Indll_ the lollo_ng _mb_l_

W ........ Wa_

m1_ ....................... _,_=,.u_

................. Dlre._ cun'_ff.

.......................... _ II ca_u:_ion,, _a_o lns_a_ort

,_ ................................... lr_L_te_ dan_ar, wami_D _' caution.

11means Qn_nti_nt_ur _aII_y i_in_l_

SERVICE SAFETY

I tf any pa r_ =ff {hi= _ b m_t,!_ or' _huutd b_.a I_.bead, _ {all tn ;mrff

or rihr_u_d i_rry e_dll_.,_l_porz_rtt f_.llto pod _n prz>p_d¥; SHUT OFF

{ha m{_Jog, d_magod or faB_._ pa..d_ rep_¢_d BEFOR_ __e.r.um_ngopem|_,

2_TOOl _rv_c/: mu_t be p_dom_d r_nly At If ,_ar_ P,_P._ and Rc*p_lr C.ent_r,

S_r_€:_ or maJn_onan¢o pe_{o_rn_f by u_'d _d pr_n_nd cor_d resu_ tO

a _k _ inlur_

In=b_-J_n.= In the _r_{n_._r_ [_1=1f1_ Of _h; rrc.rd_L U_ a{tma_h_rlzed

SAFETY' RULES FOR .r_BRE SA_

_Ke_p h_nda tlw'#y t_om CuRing a_ ;mn_ b_a. K_p yot_r _r.o nd

hand on _e n_x{l.i_, hand_ or m_l=r h_z_{_ {I b_th hend_ are h_ldlng lit_ _n',_: the

b|l=der:,_rm_tr;_ {her_

CAUTION: B_d_ c_=t _f_r _a'w t= r;_d Off I

,6,

I K_EP yol_r bodl? pr;_|lJormd t_ el{bet _id_ of the caw blade end no_ in dimc_ Eno

w_{h _ raw _ade,,

DO NOT I'e_h uodor the wodq_=o. The b_ade _r_d_ uod_ {he wc_l_'_.,e _,_ en

_w L_cult_g.

3. DO NOT toudz t_ I_a d_ at the wm_p_ece tmme_t_ty ,._ll_r _1x_l_ll_; they i_y

be extR, rn_ly h_ ;mad_:ould tx=m your z;ldl_

4 DD NOT _".lit tm owzmtz_d workptec_.

_, CHECK for the pro_ de_r'_n 1:_ under II_e wod_l_ before ct_tlog r_o It_;mtt,_

bla_ Will n_ _211_ lk_ workl_t_l=h or ma_lfal U_tdor _ wol_lec_

j ;_a=Jm:_!.', _l m_ _,j ....

SAFETY RULES FOR SABRE SAWS €orrL

E MAKE SURE ll_ bi_ de |€ Not _o_ €*J_l the wofkpie_e bet_re the =witch

t1=t_Lnrmd or_

7 HOLD TOOL by Jn_ubted gr{ppth 9 _,Uda ¢m_ (han_) when perforating an

opc_Uc_ where tho €_ttt_ tao_ _ mn_d h|dde_ Wh'|_g (_r ]t_ u_ _d_

C_t a_d wt_ a 9ivo* wiro wt I m_J<_thD e_,od m _.'_I p_Kr., of lh_ 1ool q]v_"and

_t_d_ the _p crater.

& SE_CtJR_. MATERIAL I_fam cutUng, it _*_r hold a wo=rkptoc_ rn your h_nd

or _tcrl_= your I_z;. _,_;tl| or thin m,'l thd_| _y f_z _ vibra{_ wflh the b|ado,

9, When dppln_, ALWAYS USE e dp fonc_ or t;b'atght edge gLdde. Thi_ irr=pt_ves

the _u_ of the cut _nd _e_ the ch;_nco o_ _m blade binding.

_10,NEVER cut more then o_ p_ec_ at a llm_. DO NOT S'/'AC_ more the. one

work_k= € the emrktu hie at u flrn_

11 AVOID awkward op_r_tiona an_ h_nd p_:_]t|o_ wl_m a _udden srlpcoai_

¢,1L_.-_ y_ h_lnd t_ maw _nt11tJ_oblade,

_2. NEVER mad_ Into the malting p_th uf the b_de.,

13, BLADE GUIDE ROLLERS must mJppo_t the b_ado whc.n ¢t_ll_g. T_o r_r. mud

_ og_r_ tho b_ edge _ bL'_d0.THE ONLY I_Jtting _atiof_ wh er_rc;_el; DO NOT

z;upp_ ! the Idede i_ tile _ng m_e_ WHEN _RDLUNG thQ bl_d_ _ _ as

tt I_ guided to l_t_w _c_o | p_ttot_ ALWAYS m_o the b._o b_d_ and bh_de guide up

_n_ bad<. _ from blade _n _r_L_g modo_

WARNING; uae _f th|= tool =_ _rat_ =n_=r dL_bur_ dl_t which

_:_Ut,e I=_dO¢_ =_d pl_r_nl =_mtOfi Ot 111111tn|uP/. Atw_p tt_e

NIOSH/O_A approved _p_rator_ prote_Jon _ppmpr_te f_ the d_z=t

exposure. :13md p,,_.rtl d_ away from facO and body.

in the power r_rd or _era_e _w on_ th_ broken r_ mL_lng part_ are, repl,_ced_

F_||u_ to do _ r.ould te_;uit |n po_._lbie cer_o_v. In]L_.

)

(

B|ad_ SIon_go InT_['__vo| A_slstHandle {F3g, 3)

TOOL_ BLADE INSTALIJ_TI ON (F'tg_ 4, 5 and 6)

TooHe_; _ade _t3nga _=ow_ you _o mmov_ _nd r_ th_ raw blade _y;_nd

_ W_'qout Om _ d _dd tior_11to_

Unplug _ r_

Z_ WARNING: ALWAY_ unplug _from |he pc,J/er sour_ before c_=nglng

bla_o_; o_ making any _d_ul;tme nL'_.Fal|om to unptug th_ _;;_w r,_ul d m,_uh |n

ocl:{ffen|_.! _t_111;_ Wht_:h ra_ _Ur,_ r,_zloU_ personal Injury,

NO_: Whr_n ir_s|a_J_ng o_ ramo_lng the cutting blade from the sa_,; a_wWs h_e ]

tl_ scmlli_g_rbll _:_.1m! I_I In the SMOOTH p_Idtlo_ If%_;=UIt_v_the l=v=rIn II_

_CROLL_'tG pO-_;l|lo h__e blode hotde_ a_=_emh_'./_tllkeep lumi_g and _u won't

be ebte 1o In,_ed or mmow lh_ bl;_de, [

R_ up the detU cblp shiol_ Jillor_e_B_rout _ IL_mmut_ting dot, _n_ ll_m_ the [

r_d hm 1_o r_w {_ Fi_, 4).._ply a Itt_e 1= when lir_hgO,_d _omovlng the =;htold

_ Lh_ raw

3.Tom U_o r._w _o d_m _o yo_ h_v_ _ _o the I_,_de herder a.._.err_

't4

TOOL-LESS BLADE INSTALLATION

_nt (Figs,4,5_nde)

4 Rol_Ie _e *led"_r on the _ado

a qV.?._let{urn_d hold i_intllisp_iC,_

while ir_ing a t_ado I_{o 1_o r4ot {_ l_.e

b_de hdder (_,_e F_j. _[_he Ic'e_ _ the

b_dn _muid be f_ng |a _o fz_ and

pd_,! up (v4_n _,'_w_. ,fight _;tde up_ in

c_3_ng p_lf_ 0_nd U_ehad_ of the

blade m +e_ inthe greave of$ho

b_do g_tde to_em (_e F19. 6).

5, Relea_a _o blade t_d_ _ lock the

blade Jnpla_,

6. Pulldov=_non g_e b_ado to m,_l_ =.=_

tl_e I_a d_ is r,_e_f _od_d _ ptac_

7 _ tiledoai chip shietdIr_oi1.s

moUrl_] _oI_ _od &_p |hO _ie_ld

RIt.6

_{ade gvide ro_ _t_p_r_

{_e b_do vchen ct,,'_Jeo in a.tt

NOT_ For _ wltll :bo_h =3_ _nd "U" =hank,.ed b_de=. I

CAUTION (_ b_ Nade t_ t_.a)_l In the _w, it _ _tvc_y_ expm_td.

T_m I= no Im,v_ b_de g_,'_J, ti=o _,._uU_n wheat handling _he t;_w =r_ t_t the

; b_de does net _ IrJ_, ofo_ieg, =_e, eta-IF_h time yt)t_ set t_ e.aw down _ c.sm

ALWAY5 _move bl_d_ twhe_ Saw I_ n_ being _ed,

REP,_QV1NGTHE BLADE

U_O the _.

Z_ WARNING: ALWAYS unptu.q s,3w from th_ pow_" i¢ou_ belOrl_ ch_ng|ng

bt_d_ or mo.k_n g _ny adju,_trr_n_+ Faff,_re to gnplug the. r._w r._u|d m_;ult In

2. F_t_w _L"p_ t h(_Ug!* 4 _ UyJ to(:d'(_ b_dO )_-_ll_ti_ (t_O pa0P_ 14 )nd 15),

3. Ca)_tu_ f_m_,'_i ihO bJade (o( c.%?,ngr_!ha t_ado).

4 Rp.J_tIach _!_ ct_.l_ _l_p r_i,.)ld ,3nd r,_,*_p_ dovm to IL_p_op_ potion,

IE OTE:Whenl;toringyl ur ttw,ALWAYSmmavt,,thec IiJrlg I

Ft_(.6 _nd 7

/k. CAUTION: _ hi.do g_ido r_ie_ (;uppor! the bL_do when cuttin(_.

The b_de guido tdh)m mtl=! _t (_g_|_r_t th_ b_d( (odgo of !P*_ b|_do,THE ONLY

cutting op_mf_on wh_r_ th_ blado guide ro_le_ do tt_t =uppOrt th_ Uad_ _ _d_en

th_ r_W t_ in th_ r_ling m_de.,

Wh_ _m'l:dIln g, tl_ biado mu=t _wtv_l == it 1= guided ta (O1_ the =cml! l_tl_rn.

ALWAYS mOv_ the b_4=o bac_ =rid _ado gu)do ml)em Up ;rod (_:t(;k (_w_y from th_-

bb(_ when operating in _ _l;m|lln g mod_

F'l(_, 6

Blade g_ild0 f(d_r(; _t_,p0d

g_(+bl_((e wti_n (:ut(ing in O_

cu.ing mod_ _'p! ,mr _ing,

_. _o_,_

Ftg.7

B)ad_ gul_lo _oIt_ up _t_d b_)ck

_'_ from t:_e w)i_ oporati_g

7 S_ueozo the trigger ,_,vtLch t_d d_y pu._h the _ forward. Keep the red I_ _._ bn_m

on th_ lin_ot*c_t,

AIw_ _hu_ _t the iaser iighl when you _e f_nP,_hedcutting,

LED WORtQJGHT AND "LIVE TOOL INDICATOR _ LF.J}LIGHT _g_, 9}

........ _,._ _: -- , ,.

LED WORKLIGHT

'_ut _obre r_'zwhoe an LED v_r_ ight thai

t _m,_;_DN" a I;_ore3 [I¢-311ywhen the s_w

lugged _t_ a pov,,,_-,r_._L_::e, Tho li_l_

r_ p_ov_de eaay _.d_lIity Ofthe Cutting

_ne.

"LIVE TOOL iNDICATe R'* LED LIGHT (R g- t 0)

Yau_ sow h_ _z'!Jve Tool fndic.,_l_" groe_ LED ligh_

th_.t lurr_ "IO_ _'_tcm_lJ{;al_ v_on thn t._w iS ptugged

_lr:= a power sou_e.Thl_ light I_ Ioc._l od on both _deS

d the _,._o ot the bJ_e_ swish hand{_ near tho body ¢_

the r_W_

POWERON-OFF TRIGGER 5W_CH and P_VER"LOCK_O_'_" BUTTON (Rg-+ 1I1

WARNING: Itth= ]o:;k,._an b,d_ton I_ c_n_tr_uoL_,ty being d_prc=sed,th¢

trigger _t_h cim_ot tm mt_t..ed.

ADJILtSTINE_._E CU'ITING SPt_ED WTTHTHE VARIABLE SPEED D_L

(Ftg_, 12 a_d 1?-a)

33_0 va_,_Ie _'_ loaf ore _ th._ r_w ,_ov_ yol_ fa m_l_ thD ptopr_t c_t}ng _eod

to the mat_ia_ beth;) _,A, e_h_ng the o_r_$1 periwinkle of y_ut _lw ,"rod hefpi,r=B

e _;peod,_ ran be _d_usf_ from _ 1_ 3000 SPM (_lro_$ pet ndnu_e} no-io,_d _oed.

by _=d_ir_ the v_ ff_=_o _pe_ diai l_rafed on top of _ho tti_gu _._ P,-_-hhandle.

The _t _,,ad d_al _ n_mb_t_ "1" tht _u_h _5_ v/O_ :_mber "1" the _dow_f _eed ,3_d

numbs; *_tho f_s_f _pe_ (Stir Fig. 12 a.ndT2a).

The pt opl_ I_ade _ood v_fl _K_er d_pon_=ng o_ the typ 0 ._nd_'so r,_.oi the

w_t I_|_ _ttd v,'he g_m you _te slm}g ht c_t_i_g Or iOtiOW_g _ inthrate _Oll pat_e;,n,

O 9er_ef_| rule. _;l_'w_ _poeds a_e J= defter mato_taL_ and ta._lel _p _'.'Jd; a_e for

son maled _tL_High _ e_-_J_wilt attow you to ¢t_ wo_kph_c_s l_t= bui b_ode _tle v411

be _ed_r_d.

Tr, e i_fl,:_w_g _:_azl _n help you ptc_ the pt_O_ _po_d. R_,mon_et lo ALWAY,_ u_o

th_ p_op_ c_fi_g b_de re;' fhe curing application and thr_ m_i_'_t_J you _te r;:o_ng.

ADJUST_NGTHE CUT't3NG SPEED W_H THE VARIABL-E SPEED DiAL

cord=(F3g, 12 and 12_)

Page is loading ...

Craftsman 320.17256 Owner's manual

Brand: Craftsman

Model: 320.17256

Category: Circular saws

Type: Owner's manual

This manual is also suitable for

32017256

Download PDF

report

Craftsman 320.17256 Owner's manual

This manual is also suitable for

Craftsman 320.17256 Owner's manual

Related papers

Other documents