10/100 Mbps network
Built-in 4-port switch
Built-in firewall
Built-in DHCP server
Fully web-based management
Extensive log-files with E-mail alert option
Prepared for the most frequently occurring plug-and-play applications (MSN , Netmeeting , Yahoo Messenger)
Fully platform-independent (i.e. usable in any operating system).
NAT/NAPT (Network Address Port Translation)
PPPoE & PPTP support
Dial-on-demand and Auto Disconnect for PPPoE
DHCP Server/Client
Web-based Management
URL Filter to block access to undesirable sites.
Stateful Inspection Firewall protects against Denial of Service attacks.
Logs and E-mail alerts
Access Control
UPnP (Universal Plug & Play)
ALGs (Application Level Gateways) and Special Application support for programs which are difficult to use
behind a Firewall.
DMZ/Multi-DMZ
Dynamic DNS
Virtual Servers (Port Forwarding)
Configure file Backup & Restore
Protocols: NAT, PPPoE, HTTP, DHCP, TCP/IP, UDP, PAP, CHAP, RIP1, DDNS
Firewall: NAT firewall, Attack Alert (E-mail) and log, Stateful Inspection firewall
for DoS (Denial of Service) attacks
Security: URL filter, Access Control, Local Password
VPN Pass Through: PPTP, IPSec, L2TP
Management: Web-based management
WAN port: 1 x 10/100 Mbps Ethernet (RJ45)
LAN port: 4 x Nway RJ45 10/100 Base-T auto sensing with automatic uplink facility
LED: 1xPower, 1xStatus, 4xlink/Act LAN, 4x100 LAN, 1xWAN
Power: 9V/700mA
Network Diagnostics
Data sheet: DC-202
P. 2-2.