Charbroil 12601711 Owner's manual

Brand: Charbroil

Model: 12601711

Category: Barbecues & grills

Type: Owner's manual

Charbroil 12601711 is an electric grill designed for outdoor use. It comes with a cooking grate and a warming rack, allowing you to cook a variety of foods at once. The grill has a built-in temperature gauge, so you can easily monitor the heat. It also has a grease tray that makes cleanup easy. The grill is easy to assemble and use, and it comes with a one-year warranty.

Here are some of the features and possible use cases of the Charbroil 12601711 electric grill:

Grilling: The grill can be used to cook a variety of foods, including burgers, hot dogs, chicken, fish, and vegetables.
Searing: The grill can be used to sear meats, giving them a delicious crust.

Here are some of the features and possible use cases of the Charbroil 12601711 electric grill:

Grilling: The grill can be used to cook a variety of foods, including burgers, hot dogs, chicken, fish, and vegetables.
Searing: The grill can be used to sear meats, giving them a delicious crust.

Assembly

Guide

Model Numbers:

ELECTRIC

(English)

42804710 • 01/02/13

12601711

13601831

ASSEMBLY GUIDE

A, B, C, Assembly:

CAUTION: For your safety, before operating, Read Product Guide & Outdoor Grilling Guide

provided with this grill.

*SAFETY First…..Grill components may have sharp edges. Be careful when handling grill parts

during assembly. We suggest that you wear a sturdy pair of leather gloves while handling the grill parts.

BEFORE You Grill….

1. Read Product Guide & Outdoor Cooking Guide

2. Position Grill Safely away from walls & structures.

3. Pre– Heat Grill—15 minutes on 5 , High to season grill.

TOOLS REQUIRED FOR ASSEMBLY

NOTE….

Installer: Leave instructions with the grill.

Consumer: Retain instructions for reference.

Grill must be installed in accordance with local

codes…..

Designed for outdoor use only…

Read all instructions before operating…

Phillips Head

Screwdriver

(Not Supplied)

Small Adjustable

Wrench

BEFORE You begin assembly of your grill….

1. Carefully remove all components from the carton.

3. Please note that hardware used for assembly may not be shown actual size..

Familiarize yourself with the components and hardware used for assembly.

4. After removing components from the carton, split the carton open and use it as

a soft, scratch-free work pad to assemble your grill.

Visit www.charbroil.com/live

NOTE: Some grill parts shown in the parts list may differ slightly in appearance from those on

your particular model.

ASSEMBLY GUIDE

Grill Parts Diagram

Key Qty Description

A 1

GRILL BOTTOM

B 1

HEAT SHIELD

C 1

INNER REFLECTOR

D 1

ELEMENT

E 1

CONTROL PANEL

F 1

THERMOSTAT

G 1

FRONT LEG ASSEMBLY

H 2

FRONT LEG CAP

I 1

REAR LEG ASSEMBLY

J 2

REAR LEG CAP

K 1

COOKING GRATE

L 1

GREASE TRAY

M 1

WIND SHIELD

N 1

WARMING RACK

O 1 TOP LID

P 1 LID HANDLE

Q 2 LID BUMPER

R 1 TEMPERATURE GAUGE

S 1 BEZEL, F/ TEMPERATURE GAUGE

… 1 HARDWARE PACK

… 1 ASSEMBLY GUIDE, ENGLISH

… 1 ASSEMBLY GUIDE, SPANISH-OPTIONAL

… 1 ASSEMBLY GUIDE, FRENCH-OPTIONAL

… 1 PRODUCT GUIDE, ENGLISH

… 1 PRODUCT GUIDE, SPANISH-OPTIONAL

… 1 PRODUCT GUIDE, FRENCH-OPTIONAL

… 1 GRILLING GUIDE, ENGLISH

… 1 GRILLING GUIDE, SPANISH-WEB ONLY

… 1 GRILLING GUIDE, FRENCH-WEN ONLY

NOT Pictured

ASSEMBLY GUIDE

Step 1 - Place Lower Body (A1) upside down and attach Front Leg Assembly (A2) with two 10-

24x1/2” screws. Make sure Front Leg Assembly is toward front of Lower Body as shown.

Step 2 - With Lower Body (A1) still upside down attach Rear Leg Assembly (A3) with two #10-

24x1/2” screws. Make sure the Rear Leg Assembly is positioned as shown.

Leg properly positioned

Legs properly positioned

Part Qty

A1– 1

A2–

Lower Body

A3– 1

Front Leg Assembly

Rear Leg Assembly

Fasteners

10-24x1/2"

(qty 4)

screw

A1A1

10-24x1/2"

screw

(2 each)

GRILL LEG Assembly

TURN GRILL UPRIGHT

10-24x1/2"

screw

(2 each)

Step 3 - Attach Wind Shied (B2) inside the Lower Body (B1) by aligning the holes in the

Wind Shield with corresponding holes in the Lower Body. Place fiber washer over 10-24x3/8”

screw and then insert screw with washer through hole in the center of the back and secure

with 10-24 nut. Repeat for other 2 holes.

Step 4 - Attach the Grill Lid (B3) by aligning the hinge holes in the Grill Lid over the hinge pin in

the Wind Shield (B2). Insert fiber washer over 1/4-20x1” screw then insert screw through hinge pin

hole and secure using 1/4-20 nut from the inside of the grill. Repeat for other side.

ASSEMBLY GUIDE

(qty 5)

Fiber Washer

(qty 3)

Fasteners

10-24x3/8"

(qty 3)

screw

10-24 Nut

(qty 2)

1/4-20 Nut

screw

1/4-20x1"

GRILL BODY Assembly

Part Qty

B1– Lower Body 1

B2– Wind Shield 1

B3– Grill Lid 1

10-24x3/8"

Screws

(3 each)

Screws

(2 each)

1/4-20x1"

1/4-20

Nuts

(2 each)

Fiber

Washer

(2 each)

Fiber

Washer

(3 each)

10-24

Nuts

(3 each)

Step 5 - With Grill Lid open, place the Cooking Grate (C1) into the Lower Body, allowing it to

rest on the three brackets spaced around the Lower Body. Be sure the notch in the cooking grate

is facing the front of the grill. Place the Warming Rack (C2) on to position by first hooking the

center pin into the hole in the wind shield, then rotate the warming rack down into position, with

other pins secured in the slots.

Step 6 - With Grill Lid open, install the Handle (C3)to the lid. Insert 2 10-24x3/8” screws from inside

the lid through the lid holes, and into the handle. Repeat for other side - tighten securely. Install

Grease Tray (C4) by sliding the tray onto the Grease tray rails from the side of the grill.

ASSEMBLY GUIDE

GRILL FINAL Assembly

Part Qty.

C1 – 1

C2 –

Cooking Grate

C3 –

Warming Rack

Grease tray

Notch to the

front of grill

10-24x3/8” screws

Handle

1C4

–

Fiber washers

(qty 2)

Fiber Washer

Fasteners

10-24x3/8"

(qty 2)

screw

NOTE: The Cooking Grate

may have sharp edges. Be very

careful when handling the

Cooking Grate. You should

wear gloves when handling the

Cooking Grate.

Step 7 - Install the Controller (C5) into the receptacle. The control knob should be facing up as

you engage the tip of the controller into the receptacle. Push the controller in all the way until you

hear a click, this will ensure your controller is installed properly.

ASSEMBLY GUIDE

GRILL FINAL Assembly

Part Qty.

C5 –

Controller

Ground Fault Interrupter

 Since 1971 the National Electric Code (NEC) has

required Ground Fault Interrupter devices on all

outdoor circuits.

 If your residence was built before 1971, check with a

qualified electrician to determine if a Ground Fault

Interrupter protector exists.

 Do not use this appliance if the circuit does not

have GFI protection.

 Do not plug this appliance into an indoor circuit.

Receptacle

Controller

Controller Tip

Charbroil 12601711 Owner's manual

Brand: Charbroil

Model: 12601711

Category: Barbecues & grills

Type: Owner's manual

Here are some of the features and possible use cases of the Charbroil 12601711 electric grill:

Grilling: The grill can be used to cook a variety of foods, including burgers, hot dogs, chicken, fish, and vegetables.
Searing: The grill can be used to sear meats, giving them a delicious crust.

Download PDF

report

Charbroil 12601711 Owner's manual

Charbroil 12601711 Owner's manual

Related papers

Other documents