CROWN COMMERCIAL AUDIO SERIES — 180MAx SYSTEM
QUICK-START GUIDE
Power button
After making connections as shown on other side of this sheet, and after
subscribing to XM Radio,
1. Press Power Button to turn on power.
2. Turn up Master volume control, Input volume controls and
XM Radio volume control for the desired volume.
3. Adjust antenna position to fill the signal-strength box in the LCD screen.
4. Turn Scroll knob to find a channel you like.
5. Press Scroll knob to listen to that channel.
6. If you want that channel to be a preset, press Scroll knob again.
XM Radio
volume control
LCD screen
XM
XM
Direct
Direct
Signal-strength indicator
1. Press Menu button until you see “Preset” in the LCD screen.
2. Turn Scroll knob until you see the Preset channel you want, then press Scroll knob.
124
124
Artist Song title
Artist Song title
Preset Category name
Preset Category name
Channel Name
Channel Name
HOW TO SELECT CHANNELS BY CATEGORY (MUSICAL GENRE)
Scroll knob
Menu button
Category buttons
1. Press the Menu button until you see "Category" in the lower left of the display.
2. Press Category < > buttons until you see a category you want.
3. Turn Scroll knob until you see a channel you want.
4. Press Scroll knob to listen to that channel. Press again to save that channel as a Preset.
HOW TO SELECT PRESET CHANNELS
HOW TO LISTEN TO XM RADIO AND FIND CHANNELS
124
124
Artist Song title
Artist Song title
Category Category name
Category Category name
Channel Name
Channel Name
Master volume control
Input
volume controls
(See other side)
CROWN COMMERCIAL AUDIO SERIES — 180MAx SYSTEM
QUICK-START GUIDE
JBL Control 1ST Speakers
Microphone
(such as Crown
LM-201,
LM-300A, LM-301)
(Press switch to turn down
the background music
during announcements)
(Aim to the south)
+
–
+
–
180MAx
telephone
connectors
DETAIL
TO MIC
DETAIL
To telephone system
interface/PBX
Connect 180MAx COM terminal to both speakers –.
Connect 180MAx 4-ohm terminal to both speakers +.
Shield
+
–
DETAIL
See manual
for detail
(See other side)
Two 8-ohm Speakers in Parallel
Connect 180MAx COM terminal to speakers –.
Connect 180MAx 70V terminal to speakers +.
139075-1
2/06
CONNECT 70V SPEAKERS
OR 4-8 OHMS SPEAKERS,
BUT NOT BOTH.
V
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
PROEL AUP120 User manual
-
GPX KC232S User manual
-
-
Crown Audio 140MAx User manual
-
Clarion CZ702 Owners And Installation Manual
-
-
Clarion CLCK Owner's manual
-
Voyager OPDJCV2015BT User manual
-
Grace Digital s for Current model Plus/Elite/Grace Link Internet radios Owner's manual
-
Clarion FZ502 User manual
