2. Home
  3. Domestic appliances
  4. Sanitary ware
  5. Kitchen sinks
  6. Smeg
  7. LI915NS

Smeg LI915NS Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Smeg LI915NS Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1700389
IRIS – Installation GUIDE
IRIS – Istruzioni di installazione
EN Page 2/9
1700389
IRIS Range
Technical Document for Installation Procedures
1. Introduction
This document describes installation procedures for IRIS range, namely models:
IR902ISC (double bowl),
IR901ILSC & IR901IRSC (single bowl, left hand drainer & right hand drainer),
IR9015ILSC & IR9015IRSC (1 bowl &1/2, left hand drainer & right hand drainer).
Because of the low room available underneath, some specific solutions have been developed, in order to semplify
installation operations.
2. Cabinet Sizes
This range is suitable for following cabinets:
IR902ISC: minimum cabinet size 900 mm
IR901ILSC, IR901IRSC: minimum cabinet size 450 mm
IR9015ILSC, IR9015IRSC: minimum cabinet size 800 mm
3. Cut out sizes
480 X 860 mm
Warning:
Size 860 mm is bigger than usual (usual is 480 x 840)
4. Installation of IRIS single bowl or 1 bowl & 1/2 – (IR901ILSC & IR901IRSC, IR9015ILSC & IR9015IRSC )
Long sides
N° 4 fixing clips code 1410194 per side
EN
EN Page 3/9
1700389
Drainer side and bowl side when there isn’t the cabinet wall
Bridge to be used only for low thickness worktop.
Bowl side when there is the cabinet wall
Drainer side when there is the cabinet wall
n° 3 fixing clips (code 1410212) drainer side
N° 2 fixing clips (code 1410212) bowl side
N° 2 fixing clips (code 1410211) per side
N° 2 Hooks (code 2740469) per side
N° 3 fixing clips (code 1410211 )
EN
EN Page 4/9
1700389
TOTAL :
N° 8 fixing clips code 1410194
n° 5 fixing clips code 1410212
N° 2 Hooks code 2740469
N° 5 fixing clips code 1410211
5. Installation of IRIS double bowl (IR902ISC)
Long sides
Bowl side when there isn’t the cabinet wall
Bridge to be used only for low thickness worktop.
N° 4 fixing clips code 1410194 per side
n° 2 fixing clips code 1410212 per side
EN Page 5/9
1700389
Bowl side when there is the cabinet wall
TOTAL :
N° 8 fixing clips code 1410194
n° 4 fixing clips code 1410212
N° 4 Hooks code 2740469
N° 4 fixing clips code 1410211
N° 2 fixing clips code 1410211 per side
N° 2 Hooks code 2740469 per side
EN
EN
/