5019 412 10146
Bauknecht is a registered trademark.
Programme
Temperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx.Programme
Duration***
(hours:minutes)
WhiteCotton/Antibacter. 95 5.5 55* 1.70 1:55
Cotton 60 5.5 49 1.02 2:25
Cotton+Eco** 60 5.5 49 0.93 2:35
Cotton 40 5.5 53 0.55 2:00
SuperEco 60 5.5 49 0.73 4:00
Synthetics 60 2.5 53* 0.85 1:30
Synthetics 40 2.5 47 0.50 1:15
Delicates 40 1.5 51 0.50 0:45
Dailyload 40 3.0 43 0.48 1:00
Quickwash 30 3.0 36 0.30 0:30
Wool 40 1.0 53 0.50 0:45
Handwash 40 1.0 43 0.50 0:35
Handwash 30 1.0 42 0.30 0:31
CONSUMPTION DATA
Prewashcycleincreasesprogrammedurationbyaproximately20min.Consumptionvaluesweremeasuredinnormalizedconditionsin
compliancewithstandardIEC/EN60456.Consumptiondatainthehomemayvarywithrespecttothevaluesinthetableinrelationto
thewatersupplypressureandtemperature,theloadandthetypeofwash.
* Toreducethewatertemperature,somecoldwaterisaddedattheendofthemainwashcycle,beforethepumpdrainsthewater
out.
** ReferenceProgrammeforEnergyLabel.
*** Theremainingtimeindicatorcandeviatefromthevaluesinthetable,becauseittakesintoaccountthehouseholdconditions
applicableatthattime.
1. Loadthemachine,closethedrumdoorsandcheck
thattheyareproperlylocked.
2. Adddetergentasindicatedonthefrontpageandas
describedinthechapter“DetergentsandAdditives”
inyourInstructionsforUse,andclosethelid.
3. Turntheprogramme selectortothedesired
programmeandtemperature.Thetimedisplay
showsthedurationofthechosenprogramme(in
hoursandminutes),andthelampnexttothe
“Start(Pause)”buttonblinks.Theindicationlamp
ofthepredefinedspinspeedlightsup.
4. Thespin speedindicatedcanbealteredbypressing
the“Spin”button.
PREPARATION OF THE WASH CYCLE
• Donotuseliquiddetergentsforthemainwashwhen
activatingtheprewashoption.
“Easy ironing” button
• Canbeusedtogetherwith“Cotton”,“Synthetics”
and“Dailyload”programmestomakeironingeasier.
• Increasesthewaterquantityandtheclothesarespun
verygently.
“Intensive rinse” button
• Theamountofwaterisincreasedtoensureamore
intensiverinse.
• Thisoptionisparticularlysuitableforareaswithvery
softwater,washingbabylinenandpeoplewithskin
allergies.
“Rinse hold” button
• Thelaundryremainsinthelastrinsewaterwithout
progressingtothefinalspincycletoavoidcreasing
andpreventcoloursfromchanging.
• Thisoptionisparticularlyrecommendedforthe
“Synthetics”,“Dailyload”and“Delicates”
programmes.
• Itisusefulifyouwanttopostponespinningtoalater
time,orifyouwanttodrainoutonly.
• Ifyouselect“Rinsehold”,donotleaveitemsto
soakfortoolong.
• Assoonastheappliancestopsintherinsehold,the
“Rinsehold”lampofthesequenceindicatorlightsup
andthelampnexttothe“Start(Pause)”buttonblinks.
Terminate the “Rinse hold” option:
• Pressthe“Start(Pause)”button;theprogramme
willterminateautomaticallywiththefinalspincycle
forthepresentwashprogramme.
• Ifyoudonotwishtospintheclothes,turnthe
programmeselectorknobtothe“Drain”programme
andpressthe“Start(Pause)”button.
SELECT THE DESIRED OPTION(S)
Selecting or deselecting an option can be done at
any time during the programme. The option will be
applied as long as the corresponding programme
phase has not been executed yet.
When the combination of programme and
additional option(s) is not possible, the indication
lights switch off automatically.
“Eco” button
• Withamodifiedtemperatureprofileandaslightly
prolognedwashingduration,theoptimum
combinationofexcellentwashingresultandeven
lowerenergyconsumptionisachieved.
“Prewash” button
• Onlyforheavilysoiledloads(forexamplesand,
granulardirt)sensible.Increasesthecycletimeby
approximately20min.
“DOOR OPEN” INDICATION
Beforestartingandafterendofaprogramme,thelamp
lightstoshowthethelidcanbeopened.Aslongasa
washprogrammeisrunning,thelidremainslockedand
mustonnoaccountbeforcedopen.Incaseyouhave
anurgentneedtoopenitduringarunningprogramme,
referto“Cancel(Reset)arunningprogrammebefore
theend”.
FAILURE INDICATIONS
“Service”
Lightingupofthe“Service”indicationcanbecaused
byafaultinanelectricalcomponent.Refertothe
“TroubleshootingGuide”inyour“InstructionsforUse”;
ifthefaultpersists,contactourAfterSalesService.
“Water tap closed”
Theappliancehasnoorinsufficientwatersupply.Open
thewatertap;iftheindicationsstilllightsup,refertothe
“TroubleshootingGuide”intheInstructionsforUse.
“Clean pump”
Wastewaterisnotpumpedout.Checkwhetherthe
drainhoseiskinkedorthefiltermustbecleaned;inthe
lattercaserefertotheInstructionsforUse(“Removing
theFilter”).
PROGRAMME START
Openthetapandpressthe“Start(Pause)” button.
Theindicationlampnexttothe“Start(Pause)” button
lightsup.Theprogrammesequenceindicatorshowsthe
currentprogrammephase,runningfromlefttoright
throughWash,Rinse,Spin/Drain.Whentheprogramme
phraseisfinised,thecorrespondingindicationgoesout.
• Note: Ifthereisapowerinterruptionorifthe
applianceisdisconnectedduringthecycle,the
programmewillrunagainfromthepointwhereit
wasinterrupted.
PROGRAMME END
Allthelightsoftheprogrammesequenceindicatorare
off,andthe“Dooropen”indicationlightsup.
1. Turntheprogrammeselectortothe“Off/O”
position.
2. Closethewatertap.
3. Openlidanddrumandunloadthemachine.
4. Leavethelidopenforsometimetoallowthe
interiorofthemachinetodry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Pressthe“Start(Pause)” buttontopausethe
programme.Thelightblinks.
2. Selectthenewprogramme,anyoptionsandanother
spinspeedifyouwant.
3. Pressthe“Start(Pause)” buttonagain.Thenew
programmecontinuesatthesamepositionwhere
thepreviousprogrammewasinterrupted.Donot
adddetergentforthisprogramme.
CANCEL (RESET) A RUNNING PROGRAMME
BEFORE THE END
The“Reset”buttoncancelsaprogrammebeforethe
end.Pressthe“Reset” buttonforatleast3seconds.
Anyexistingwaterisdrainedoutbeforethelidcanbe
opened.
START DELAY
The“Startdelay”buttonallowstheusertorunthe
machineathisconvenience,forexampleatnightwhen
electricityischeaper.
• Selectprogramme,spinspeedandoptions.
• Pressthe“Startdelay”buttonseveraltimesto
selectadelaytimeby1to23hours.
• Pressthe“Start(Pause)”button-thecountdown
ofthedelaytimebegins.Thelightofthe“Start
delay”buttonandthedotonthedisplaywillkeep
blinkinguntiltheprogrammestarts.
• Assoonastheprogrammestarts,thelightoverthe
“Startdelay”buttongoesoffandthetimedelay
onthedisplayisreplacedbytheremaining
programmetime.
• Afterthe“Start(Pause)”buttonhasbeenpressed,
thenumberofhourspreselectedcanbereducedby
pressingagainthe“Startdelay”button.
To cancel the “Start delay”
..before you press the “Start(Pause)” button:
• Turntheprogrammeselectortoanotherposition
orpressthe“Reset”button.
..after having pressed the “Start(Pause)” button:
• Pressthe“Reset”buttonforatleast3second.The
startdelayindicatorlightgoesoff.
“Spin” button
• Everyprogrammehasapredefinedspinspeed.
• Pressthebuttontosetanotherspinspeed.
• Ifspinspeed“0”isselected,thefinalspinningis
cancelledbutintermediatespinpeaksremainduring
therinse.Thewaterisdrainedoutonly.