Nature Power 23206 Owner's manual

Type
Owner's manual

This manual is also suitable for

SAVE THESE INSTRUCTIONS
Bayport Solar Lamp
User Manual
WARNING: Read carefully and understand all ASSEMBLY AND OPERATION
INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
precautions may result in serious personal injury.
V1.1-M 1Jan2018
#23106 #23206
Page 2 of 5
WARNING
Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool. Always be
aware of the environment and ensure that the tool is used in a safe and responsible manner.
Do not allow persons to operate or assemble the product until they have read this manual and
have developed a thorough understanding of how it works.
Do not modify this product in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the
product was designed.
Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. It
will be a safer experience and do the job better at the capacity for which it was intended. DO
NOT use this equipment for a purpose for which it was not intended.
Industrial or commercial applications must follow OSHA requirements.
Important Safety Information
Thank you for choosing a Nature Power Product.
Save the receipt and these instructions. It is important that you read the entire manual to become
familiar with this product before you begin using it.
This product is designed for certain applications only. the distributor cannot be responsible for
issues arising from modification. We strongly recommend this product not be modified and/or used
for any application other than that for which it was designed. If you have any question relative to a
particular application, Do not use the product until you have first contacted the distributor to
determine if it can or should be performed on the product.
For technical question please call 1800-588-0590
Prop. 65 Warning for California Residents
WARNING: This product may contain chemicals
known to the State of California to cause cancer,
birth defects, or other reproductive harm.
Page 3 of 5
Installation and Use
Features
Parts List
R
LED’s
#23106
Descripon Qty.
1 Lamp 1
2 3
3 1
4 Screws 3
5 3
6 1
#23206
Descripon Qty.
1 1
2 3
3 1
4 3
5 2
Post Lamp Mounting:
1)Carefully remove the sola
r light and all the fittings out of the box.
2) Find a suitable place to install the lamp. There are several ways to secure the post
lamp. You may wish to set the anchor bolts in cement, or secure the lamp base to a
heavy object. Be sure the area is flat so the lamp will stand straight.
3) Mark the three holes from the lamp base on the ground or mount surface.
4) Using an electric drill, drill holes in the mount surface where the marks were made.
5) Place the anchor in the holes with the threaded ends out. Release the nut, spring pad, and pad from the anchor
and put the lamp ground base onto the anchor, the anchor should be through the holes. Reinstall the pad, spring
pad and then the nut. Tighten with a wrench.
6) Make sure the lamp base is stable before installing the lamp poles.
7) Install the lamp pole onto the lamp base by supplied 3 screws and L shape wrench.
8) Install the rest of lamp poles according to size by twisting clockwise.
9) Attach lamp head to lamp head adapter.
10) Fix the lamp on to the pole by twisting in a clockwise direction.
Page 4 of 5
Lamp
1)
2)
3)
4)
5)
Pillar Mounng:
1)
.
2)
out.
3)
6)
4)
1)
2)
1)
2)
3)
For daily / normal operation, turn the switch to the “I”(ON) position. Light will automatically turn on when
the sun goes down. While turn to “O (OFF)” switch, the light will stop working.
Operating Instructions
Page 5 of 5
Limited Warranty
Trouble Shooting
1)
2)
3)
Make sure the switch is in the “I(ON)” position.
              
                   

Please&contact& Nature& Power& Products& to&acquire&more&information:!
1-800-588-0590
info@naturepowerproducts.com!
www.naturepowerproducts.com!
Made in China
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Nature Power 23206 Owner's manual

Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI