Whirlpool AWM 6063 Program Chart

Brand: Whirlpool

Model: AWM 6063

Type: Program Chart

Whirlpool AWM 6063 is a washing machine with a wide range of features to make doing laundry easier and more efficient. It has 14 different programs to choose from, depending on the type of fabric and the level of soiling. The machine also has a number of special options, such as a pre-wash cycle, an intensive rinse cycle, and a rinse hold option. Additionally, the Whirlpool AWM 6063 has a delay start feature, which allows you to set the machine to start washing at a later time.

5019 100 06990

Home

Appliances

Programme

Care

Labels

Type of wash / Notes

Max Load

Detergents and additives Special options

Max

Spin

Speed

rpm

Programme

Selector

Bleach Softener Main

Wash

Pre-wash

Start

Delay

Easy

Ironing

Prewash

Intensive

Rinse

Hold

Spin Speed

Reduction

Partenza

ritardata

Stiro

facile

Pre-

lavaggio

Risciacquo

Intensivo

Anti

piega

Centrifuga

Cotton/

Coloured cotton

Slightly to normally soiled bed linen, table linen and underwear, towels, shirts

etc. made of cotton and linen.

With heavily soiled laundry the additional “Prewash” option can be selected as

well.

5.0

❉❉

Yes

❉❉❉❉ ❉ ❉ ❉

600

Cotone

95°,60°,40°

Cotton

Slightly soiled bed linen, table linen and underwear, towels, shirts etc. made

of cotton and linen.

5.0

❉❉

Yes

❉❉❉❉ ❉ ❉ ❉

600

Cotone 30°

Synthetics

Slightly to normally soiled blouses, shirts, overalls etc. made of polyester

(Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

2.5

—

❉

Yes

❉❉❉❉ ❉ ❉ ❉

500

)

Sintetici

60°,40°

Synthetics

short

Slightly soiled overalls and sports wear made of cotton, polyester, polyamide

and blends with cotton.

In this programme, selection of “Prewash” and “Intensive Rinse” is not

possible.

3.0

—

❉

Yes —

❉❉

——

❉❉

600

Sintetici

Breve 30°

Delicates

Curtains and delicate clothing, dresses skirts, shirts and blouses.

“Intensive Rinse” is not possible in this programme.

1.5

—

❉

Yes

❉❉

—— —

❉❉

500

)

Delicati

40°,30°

Wool

Only woollens with a felt-free finish, labelled with the woolmark and

identified as machine washable.

If you select “Rinse Hold” do not leave items to soak for too long.

1.0

—

❉

Yes —

❉

—— —

❉❉

500

)

Lana,

Lana a freddo

Silk

Textiles made of linen, silk, wool and viscose marked as “handwashable”.

If you select “Rinse Hold” do not leave items to soak for too long. No spinning.

1.0

—

❉

Yes —

❉

—— —

❉

—

)

Seta

Rinse + spin —

Same as the last rinse and the final spin in the “Coloured Cotton” programme.

5.0

—

❉

——

❉❉

—

❉❉❉

600

Risciacquo e

Centrifuga

Spin —

In this programme spinning is intensive. Same as the spin cycle in the “Coloured

Cotton” programme.

5.0

—

———

❉

—— — —

❉

600

Centrifuga

intensivo

Gentle spin —

In this programme spinning is gentle. Same as the spin cycle in the “Wool”

programme.

1.5

—

———

❉

—— — —

❉

500

)

Centrifuga

Drain —

Drain only - no spinning. Alternative method of terminating programme after

“Rinse Hold”.

——

—————— — —

—

Scarico acqua

100

400

500

600

Sintetici

Cotone

Delicati

95°

60°

40°

30°

60°

40°

Lana a freddo

Scarico acqua

Centrifuga

Centrifuga intensiva

Risciacquo e Centrifuga

40°

Seta

Lana

30°

Avvio

(Pausa)

Anti

piega

Centrifuga

Risciacquo

intensivo

Pre-

lavaggio

Prelavaggio

Centrifuga

Apertura portaLavaggio Risciacquo Anti piega

Stiro

facile

h. min.

Partenza ritardata

Tempo restante

Scarico

Breve 30°

A. Programme Sequence Indicator

B. “Start/Pause” Button

C. “Door Open” Indication

D. “Start Delay” Button

E. “Spin Speed Reduction” Button

❉

: optional / Yes : dosing required

For improved garment care spin speed is restricted to

500 rpm in this programme.

For improved garment care spin speed is null in this

programme.

AWM 6063

Whirlpool is a registered trademark of Whirlpool USA.

5019 100 06990

Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized

conditions in compliance with Standard IEC 60 456.

Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and

temperature, the load and the type of wash.

* The remaining time indicator can similarly deviate from the values in the table, because it takes into account the

household conditions applicable at that time.

**To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains

the water out.

Add the detergents as described in the programme

table or in the chapter “Detergents and Additives”

in the booklet.

1. Turn the

programme selector knob

to the

desired programme and temperature.

2. The remaining time display shows the duration

of the chosen programme (in hours and minutes)

and after taking some seconds for calculating,

the pilot lamp of the

“Start/Pause”

button

is flashing.

3. The programme sequence and the predefined

spin speed indication corresponding to the

selected programme lights up.

Selecting any option the indication lights up.

When the combination of programme, additional

options and temperature is not possible, the

indication lights switch off automatically.

Unsuitable combinations of options are

deselected automatically.

“Easy Ironing” button

• Can be used together with Cotton and Synthetics

programmes to make ironing easier.

• Increases the water quantity and the clothes are

spun very soft.

“Prewash” button

• Only for heavily soiled loads (for example sand,

granular dirt) sensible. The cycle time increases

approximately 15 min.

“Intensive Rinse” button

• More water and a longer time in rinse cycle is

added.

• This option is particularly suitable for areas with

very soft water, washing baby linen and helps

people with allergies.

“Rinse Hold” button

• The laundry remains in the last rinse water

without progressing to the final spin cycle to

avoid creasing and prevent colours from

changing.

• This option is particularly recommended for the

programme “Synthetics” or “Delicates”.

• This function is particularly useful if you want to

postpone spinning to a later time, or if you want

to drain only.

CONSUMPTION DATA

Programme

Temperature

Selector

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx.

Programme

Duration

(hours : minutes)*

Cotton 95 5.0 49

1.70 1:50

Cotton 60 5.0 44 0.95 2:00

Cotton 40 5.0 44 0.55 1:50

Synthetics 60 2.5 55 0.80 1:25

Synthetics 40 2.5 50 0.60 0:50

Synthetics short 30 3.0 37 0.40 0:30

Delicates 30 1.5 50 0.50 0:45

Wool 40 1.0 55 0.50 0:40

Silk 30 1.0 37 0.40 0:40

ADD DETERGENTS, CLOSE THE DOOR AND

SELECT THE PROGRAMME

SELECT ANY DESIDERED OPTION

Note:

The programme stops to “Rinse Hold” at the

time the “Rinse Hold” light in the programme flow

indication is on.

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the

programme will terminate automatically with the

final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the

programme selector knob to the “Drain”

programme and press the “Start/Pause” button

again when flashing.

“Spin Speed Reduction” button

• Every programme has an automatic predefined

maximum spin speed.

• Press the button to set another spin speed.

• If the spin speed “

” is selected, the final spinning

is cancelled but intermediate spin peaks remain

during rinse. The water is drained out only.

The “Start Delay” allows to run the machine at the

consumer’s convenience, for example at night

when electricity is cheaper.

• Press the “Start Delay” button to select the

delay time by 1 to 23 hours;

• Press the

“Start/Pause”

button.

• The time delay indication disappears when the

programme starts and it is replaced by the

remaining time.

• The number of hours preselected can later be

reduced pressing again the “Start Delay”

button.

To cancel the “Start Delay”.

• Turn the programme selector to the “” position.

• Reselect the desired programme and options

and press the

“Start/Pause”

button.

Open the tap and press the

“Start/Pause”

button.

The pilot lamp of the “Start/Pause” button lights up.

The indicator lamps show the sequence reached in

the programme. After starting the programme, the

sequence indication runs from left to right through

Wash, Rinse, Spin.

When the sequence of the programme is finished

the corresponding lamp goes out.

The door can be opened when the “Door Open”

indication is on.

• The remaining time is on “0:00” and all

the lights of the programme sequence

indication are off.

1. Turn the programme selector to the

“”

position.

2. Turn the water supply tap off.

3. Open the door and unload the machine.

4. Close the tap and leave the door ajar to allow

the drum to dry out.

1. Press the

“Start/Pause”

button to pause the

programme. The light flashes.

2. Select the new programme (with temperature),

any options and another spin speed if you want.

3. Press the

“Start/Pause”

button again.

The new programme continues at the same

position where the previous programme was

interrupted. Do not add detergents for this

programme.

1. Press the

“Start/Pause”

button to pause the

programme. The light flashes.

2. Set the programme selector to “Drain”.

The spin indicators show

“0”

and the

remaining time shows “0:02”.

3. Press the

“Start/Pause”

button to start

the drain programme.

START DELAY

PROGRAMME START

DOOR LOCK

PROGRAMME END

CHANGE THE PROGRAMME, OPTIONS AFTER

PROGRAMME START

CANCEL A PROGRAMME BEFORE

THE END

Whirlpool is a registered trademark of Whirlpool USA.

Whirlpool AWM 6063 Program Chart

Whirlpool AWM 6063 Program Chart

Whirlpool AWM 6063 Program Chart

Related papers

Other documents