Whirlpool AKM 374/IX Program Chart

Brand: Whirlpool

Model: AKM 374/IX

Type: Program Chart

AKM 374 PRODUCT DESCRIPTION SHEET

VE CO

5019 319 60771

Operation of burners with safety device

and electric ignition

To light one of the burners:

• Press the relative knob and turn it anti-

clockwise to the large flame and star

setting .

• At the same time, hold the knob down until

the burner ignites.

• After the burner has ignited, keep the knob

pressed down for about 10 seconds.

• Release the knob.

If the burner does not ignite, repeat the operations

described above.

Note:

— Should particular local conditions of the

delivered gas make ignition of the burner

difficult, it is advisable to repeat the

operation with the knob turned to the small

flame setting .

— The burner safety device shuts off the gas

supply to the burner if the flame goes out

accidentally (because of a sudden draught,

an interruption in the gas delivery, boiling

over of liquids, etc.).

— The separator panel, positioned beneath the

cooktop at a minimum distance of 20 mm,

must be sealed.

1. Removable panstand grids

2-5. Medium burners

3. Large burner

4. Small burner

6. Triple crown burner

7. Small burner control knob

8. Large burner control knob

9. Triple crown burner control knob

10. Medium burner control knob

11. Medium burner control knob

Symbols

Shaded

circle

Tap closed

Large

flame

and star

Maximum opening/delivery

and electric ignition

Small

flame

Minimum opening

or reduced delivery

DIMENSIONS OF COOKING HOB AND WORKTOP (mm)

NOTE: If the distance “A” between the wall cabinets is between 600 mm and 680 mm, the

height “B” must be a minimum of 520 mm.

If the distance “A” between the wall cabinets is greater than the width of the

cooktop, the height “B” must be a minimum of 400 mm.

Before installing a hood above the cooktop please refer to the hood instructions,

which specify the correct distance. In case of installation of an oven under the

cooktop, please refer to the separate oven instructions.

INJECTORS TABLE CATEGORY II2H3+

Type of

gas used

Type of

burner

Injector

marking

Rated heat

capacity

Pcs-kW

Rated

consumption

Reduced

heat

capacity

Pcs-kW

Gas pressure

min. rat. max.

NATURAL GAS

(Methane) G 20

Triple crown

large

medium

small

121+59

128

3.30

3.00

1.65

1.00

314 l/h

286 l/h

157 l/h

95 l/h

1.50

0.60

0.35

0.30

17 20 25

LIQUID

PETROLEUM GAS

(Cylinder) G 30

Triple crown

large

medium

small

86+37

3.30

3.00

1.65

1.00

240 g/h

218 g/h

120 g/h

73 g/h

1.50

0.60

0.35

0.30

20 28-30 35

LIQUID

PETROLEUM GAS

(Cylinder) G 31

Triple crown

large

medium

small

86+37

3.30

3.00

1.65

1.00

236 g/h

214 g/h

118 g/h

71 g/h

1.50

0.60

0.35

0.30

25 37 45

Type of

gas used

Appliance

model

Total rated heat

capacity

Pcs-kW

Total rated

consumption

Air required for

burning

G 20 20 mbar 5 gas 10.6 1009 l/h 21.2

G 30 28-30 mbar 5 gas 10.6 771 g/h 21.2

G 31 37 mbar 5 gas 10.6 757 g/h 21.2

Whirlpool AKM 374/IX Program Chart

Whirlpool AKM 374/IX Program Chart

Whirlpool AKM 374/IX Program Chart

Related papers

Other documents