Bauknecht WAK 5450 Program Chart

Brand: Bauknecht

Model: WAK 5450

Category: Washing machines

Type: Program Chart

Bauknecht WAK 5450: Your laundry expert for spotless results and efficient washing. Tackle heavily soiled linens, delicate fabrics, and everything in between with ease. Choose from a range of programs tailored to specific needs, including Cotton, Synthetic, Daily Mixed, Rapid Wash, Delicate, Wool, Handwash, Easy Ironing, Spin, Rinse & Spin, and Drain. Benefit from special options like Prewash, Intensive Rinse, Rinse Hold, and adjustable spin speeds for customized laundry care. The Dynamic Intelligence technology ensures optimal results with maximum efficiency for every load.

GB WAK 5450 PROGRAMME CHART

5019 401 05262

For improved garment care spin speed is restricted to 1000 rpm in this programme.

For improved garment care spin speed is restricted to 400 rpm in this programme.

Programme

Care

Labels

Type of w a s h /

Degree of soiling

Max.

load

Detergent and Additives

Selectable Special Options =

❉

Te m p e -

rature

°C

Max.

Spin

speed

rpm

Notes

Softener Main

wash

Pre-

wash

Pre-

wash

Vor-

wäsche

Intensive

Rinse

Intensiv

Spülen

Rinse

hold

Spül-

stopp

Speed

reduction

Schleudern

Cotton

Koch- Buntwäsche

Normally to heavily soiled bed linen, table linen and underwear,

towels, shirts etc. made of cotton and linen.

For temperature selection, respect the manufacturer’s

recommendations on the care label.

Selecting “Cotton 95° C”, this programme eliminates bacteria,

ensuring sanitization of your laundry. The bacteria removal efficiency

has been tested following a similar methodology to the NF EN

13697 standard of Nov. 2001.

5.0

❉

Yes

❉❉ ❉❉ ❉

30-40

60-95

1400

“Prewash” can be additionally selected for

heavily soiled laundry at any temperature.

Synthetic

Pflegeleicht

Normally soiled blouses, shirts and other outer clothing made of

polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or mixtures of

these fibres with cotton.

For temperature selection, respect the manufacturer’s

recommendations on the care label.

2.5

❉

Yes

❉❉ ❉❉❉

30-40-60 1000

“Prewash” can be additionally selected for

heavily soiled laundry.

Daily mixed

Mischwäsche

Slightly to normally soiled textiles made of cotton and/or synthetic fibres.

For temperature selection, respect the manufacturer’s

recommendations on the care label.

3.0

❉

Yes

––

❉❉❉

40-60 1400

In this programme the spin speed should be

adapted to the fabrics.

Rapid wash

Schnelle Wäsche

Hardly worn outer and sports clothing made of cotton, polyester,

polyamid and mixed cotton fabrics.

3.0

❉

Yes

––

❉❉

30 1400

–

Delicate

Feinwäsche

Curtains and delicate dresses, skirts, shirts and blouses.

1.5

❉

Yes

❉❉

30-40 1000

–

Wool

Wolle

Only woollens with a felt-free finish, labelled with the woolmark and

identified as machine washable.

1.0

❉

Yes

––

❉❉

cold

30-40

1000

If you select “Rinse hold” do not leave items

to soak for too long.

Handwash

Handwäsche

Textiles made of linen, silk, wool or viscose marked as

“handwashable”.

This cycle is particularly suitable to treat delicate lingerie (use of a

laundry net strongly recommended).

1.0

❉

Yes

––

❉❉

30 400

If you select “Rinse hold” do not leave items

to soak for too long. A very gentle spin is

used in this programme.

Easy ironing

Leicht bügeln

Normally soiled blouses, shirts and other outer clothing made of

polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or mixtures

of these fibres with cotton.

3.0

❉

Yes

❉❉ ❉❉❉

40 1000

To lessen creasing, the water quantity is

increased and the clothes are spun very

gently in this programme.

Spin

Schleudern

––

5.0

–––– – –

❉

–

1400

In this programme spinning is intensive.

Same as the spin cycle in the “Cotton”

programme.

Rinse & Spin

Spülen & Schleudern

––

5.0

❉

–– –

❉❉❉

20 1400

Same as the spin cycle in the “Cotton”

programme.

Drain

Abpumpen

––––––––––––

This programme only drains (alternative

method of terminating the programme after

“Rinse hold” without spinning). In addition

all running programmes can be cancelled

with this programme.

The

Dynamic

Intelligence

technology always guarantees perfect results with maximum efficiency

whatever the wash load.

This washing machine is equipped

with

automatic safety functions

which detect

and diagnose faults at an early stage and react

appropriately, e.g.:

A. “Pump” indicator

B. “Water tap closed” indicator

Check your washing machine’s water

supply.

C. “Door locked” indicator

As long as a washing programme is running,

the lamp lights up to show that the door

cannot be opened.

D. “Start” button

E. Programme sequence indicator

F. Spin Speed reduction button

G. Reset button

H. Selectable programmes

{

F G

40105262GB.fm Page 1 Monday, September 5, 2005 8:02 PM

Black process 45.0° 100.0 LPI

5019 401 05262

Add the detergent as described in the chapter

“Detergent and Additives” in the instructions for use.

Turn

the

programme selector knob

in any

direction to the desired programme.

The light above the

“Start”

button flashes.

The

programme sequence indicator

and the

indicator with the maximum possible spin speed

light up.

• Wash your laundry in the desired Cotton

programme, adding an appropriate amount of

chlorine bleach to the SOFTENER chamber

(close the detergent dispenser carefully).

• IMMEDIATELY after end of programme, start

the “Rinse and Spin” programme: if you want,

you can add softener.

“Prewash” button

• Only for heavily soiled laundry (e.g. sand or

granular dirt). Programme duration is increased

by some 15 min.

“Intensive Rinse” button

• An additional rinse cycle is carried out.

• This option is particularly suitable for areas with

very soft water, washing baby linen and helps

people with detergent allergies.

“Rinse Hold” button

• The laundry remains in the last rinse water

without being spun: discoloration of the laundry

and additional creasing are prevented.

• This option is particularly recommended for the

programme “Synthetic” or “Delicate”.

• This function is particularly useful if you want to

postpone spinning to a later time.

Note:

The programme has reached the “Rinse

Hold” when the corresponding light flashes.

CONSUMPTION DATA

Programme Te m p e r a t u r e

(°C)

Wash

(kg)

Water

(l)

Energy

(kWh)

Programme duration

approx.**

(hours : minutes)

Cotton

95 5.0 43

***

1.90 2:00

Cotton

60 5.0 39 0.95 2:05

Cotton

40 5.0 39 0.60 2:05

Synthetic

60 2.5 65

***

0.90 1:40

Synthetic

40 2.5 60 0.50 1:25

Daily mixed

40 3.0 44 0.45 1:00

Rapid wash

30 3.0 35 0.30 0:30

Delicate

40 1.5 55 0.60 0:45

Wool

40 1.0 55 0.60 0:40

Handwash

30 1.0 40 0.30 0:35

Easy ironing

40 3.0 65 0.50 1:25

The

consumption values

were measured in normalized conditions in compliance with Standard IEC/EN 60456.

The

programme duration

may also vary from the chart values. The washing machine is able to allow for particular

household conditions and to adapt the programme run time accordingly.

***

To r e du c e t h e

water temperature

, some cold water is added at the end of the main wash cycle, before the pump drains

the water out.

POUR IN DETERGENT, CLOSE THE

DOOR AND SELECT A PROGRAMME

USING CHLORINE BLEACH

SELECT SPECIAL OPTIONS - The

corresponding lights go on (if not selectable:

rapid flashing for 3 seconds)

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the

programme will terminate automatically with the

appropriate spin cycle for the current programme.

• If you do not wish to spin the clothes, turn the

programme selector knob to “Drain” and press

the

“Start”

button again.

“Spin speed” button

• A maximum spin speed is assigned to each

programme.

• Press the button to set another speed for the

spin cycle.

• If no light goes on, the final spin is cancelled.

The water is only drained out.

After you have selected the programme and the

additional option, the indicator light over the

“Start”

button flashes. Turn on the tap and start

the programme by pressing the

“Start”

button.

Now the indicator light above the button goes on.

In addition, all programme phases are indicated by

the associated lights. After the end of a programme

phase, the associated indicator light goes out. Thus

the programme sequence indicator moves from left

to right across the wash, rinse and spin phases. At

the end of the programme, only the “End” indicator

is still on..

As long as a washing programme is running, the

lamp lights up to show that the door cannot be

opened. When the lamp goes off, the door can be

opened again.

“Start”

has been pressed, but the door is not

latched, the “Door Locked” indicator flashes for 10

seconds. The door must be pushed shut within this

time. After the 10 seconds, the “Door Locked”

indicator goes out and the

“Start”

button flashes.

The door must then be opened and closed again and

the

“Start”

button must be pressed.

“Pump”

Waste water is not pumped out. Check wether the

drain hose is kinked or the filter must be cleaned; in

the latter case refer to the Instructions for Use

(“Removing the Filter”).

“Water tap closed”

The appliance has no or insufficient water supply.

Open the water tap; if the indication still lights up,

refer to the “Troubleshooting Guide” in the

Instructions for Use.

• The “End” indicator goes on.

1. Set the programme selector knob to the

“Off” position.

2. Turn off the tap.

3. Open the door and unload the machine.

A newly-selected programme will continue in the

same programme section during which the current

programme was interrupted. Therefore do not add

any more detergent.

1. Press the

“Start”

button to interrupt the

programme. The light flashes.

2. Select the new programme (with temperature),

any additional options and - if you wish - another

spin speed.

3. Press the

“Start”

button again to restart the

programme.

• If you are in the “Prewash” programme step, this

additional option cannot be deselected as

described (to do this see “Cancel (Reset) a

running programme before the end”).

Press the

“Reset”

button for at least 2 seconds.

Any existing water is drained out before the door

can be opened.

PROGRAMME START

“DOOR LOCKED” INDICATOR

“TROUBLE” INDICATORS

PROGRAMME END

RESELECT AFTER PROGRAMME START

CANCEL (RESET) A RUNNING

PROGRAMME BEFORE THE END

40105262GB.fm Page 2 Monday, September 5, 2005 8:02 PM

Black process 45.0° 100.0 LPI

Bauknecht WAK 5450 Program Chart

Brand: Bauknecht

Model: WAK 5450

Category: Washing machines

Type: Program Chart

Download PDF

report

Bauknecht WAK 5450 Program Chart

Bauknecht WAK 5450 Program Chart

Related papers

Other documents