Advanced Diagnostics AD30 Operating instructions

Brand
Advanced Diagnostics
Model
AD30
Type
Operating instructions

Advanced Diagnostics AD30 Below you will find brief product information for Advanced Diagnostics AD30. This device is a coil detector that can be used to detect faults in vehicles. It is small and lightweight, making it easy to use and transport. The AD30 has an audible detection signal and a detection LED that indicate when a fault has been detected. It also has a power LED that indicates when the device is on. The AD30 is powered by a 9v / PP3 battery and has an auto power off function that turns the device off after approximately 2 minutes of inactivity.

Advanced Diagnostics AD30 Below you will find brief product information for Advanced Diagnostics AD30. This device is a coil detector that can be used to detect faults in vehicles. It is small and lightweight, making it easy to use and transport. The AD30 has an audible detection signal and a detection LED that indicate when a fault has been detected. It also has a power LED that indicates when the device is on. The AD30 is powered by a 9v / PP3 battery and has an auto power off function that turns the device off after approximately 2 minutes of inactivity.

AD30 Operating Instructions
Detection Area
Detection LED
‘ON’ Switch
Power LED
Audible
Detection
Signal
Step
Result
1 2
+ = Coil OK
ok
And / Or = Fault
ok
Power
Note: Although the detector needs to be as close as possible to the coil ,on certain vehicles
a) The coil will emit a signal when the door is opened.
b) The coil will emit a signal when the ign key is inserted into the ign and not turned on.
c) The ‘OK’ LED will flash at various times and the sound will vary dependant upon car.
Size
78(w) x 117(h) x 24(d)
Weight
135g
Auto Power Off
Yes. Approx 2 mins
Power
9v / PP3 Battery
Specification
AD30 Operating Instructions
Detection Area
Detection LED
‘ON’ Switch
Power LED
Audible
Detection
Signal
Step
Result
1 2
+ = Coil OK
ok
And / Or = Fault
ok
Power
Note: Although the detector needs to be as close as possible to the coil ,on certain vehicles
a) The coil will emit a signal when the door is opened.
b) The coil will emit a signal when the ign key is inserted into the ign and not turned on.
c) The ‘OK’ LED will flash at various times and the sound will vary dependant upon car.
Size
78(w) x 117(h) x 24(d)
Weight
135g
Auto Power Off
Yes. Approx 2 mins
Power
9v / PP3 Battery
Specification
AD30 Operating Instructions
Detection Area
Detection LED
‘ON’ Switch
Power LED
Audible
Detection
Signal
Step
Result
1 2
+ = Coil OK
ok
And / Or = Fault
ok
Power
Note: Although the detector needs to be as close as possible to the coil ,on certain vehicles
a) The coil will emit a signal when the door is opened.
b) The coil will emit a signal when the ign key is inserted into the ign and not turned on.
c) The ‘OK’ LED will flash at various times and the sound will vary dependant upon car.
Size
78(w) x 117(h) x 24(d)
Weight
135g
Auto Power Off
Yes. Approx 2 mins
Power
9v / PP3 Battery
Specification
AD30 Operating Instructions
Detection Area
Detection LED
‘ON’ Switch
Power LED
Audible
Detection
Signal
Step
Result
1 2
+ = Coil OK
ok
And / Or = Fault
ok
Power
Note: Although the detector needs to be as close as possible to the coil ,on certain vehicles
a) The coil will emit a signal when the door is opened.
b) The coil will emit a signal when the ign key is inserted into the ign and not turned on.
c) The ‘OK’ LED will flash at various times and the sound will vary dependant upon car.
Size
78(w) x 117(h) x 24(d)
Weight
135g
Auto Power Off
Yes. Approx 2 mins
Power
9v / PP3 Battery
Specification
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Advanced Diagnostics AD30 Operating instructions

Brand
Advanced Diagnostics
Model
AD30
Type
Operating instructions

Advanced Diagnostics AD30 Below you will find brief product information for Advanced Diagnostics AD30. This device is a coil detector that can be used to detect faults in vehicles. It is small and lightweight, making it easy to use and transport. The AD30 has an audible detection signal and a detection LED that indicate when a fault has been detected. It also has a power LED that indicates when the device is on. The AD30 is powered by a 9v / PP3 battery and has an auto power off function that turns the device off after approximately 2 minutes of inactivity.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents