3 simple steps to configure the optional Stopper for your HDMI cable.
1. Measure HDMI cable with included Wire/Stopper Gauge Tool to determine the correct inserts to
use with the stopper. Ensure that you have a snug fit. Reference gauge number for next step.
HDMI Cable HDMI Cable
Steps 2 and 3 on the reverse side.
Universal 4K HDMI® Adapter Ring Optional Stopper
Quick Start Guide
1
2. Select the corresponding insert number that matches the gauge tool number and install in stopper.
Example: If the gauge tool is 6, select the two 6 inserts and install in each side of the stopper.
Example Hint: If the cable happens to have a size in between 5 (too tight) and 6 (too loose), you
can use one 5 insert and one 6 insert for best fit.
HDMI Cable
Universal 4K HDMI® Adapter Ring Optional Stopper
Quick Start Guide
Insert
Stopper
Black Metal Screws
3. Clamp the stopper to the HDMI cable and tighten with the provided black metal screws.
2 3
www.c2g.com 6500 Poe Avenue, Dayton, OH 45414 Tel: 800.CABL.911 © 2020 Legrand All Rights Reserved rev.04/20
-
1
-
2
