2. Danfoss
  3. 032F5675
032F5675

Danfoss 032F5675 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Danfoss 032F5675 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
032R9791
032R9791
© Danfoss | DCS (az) | 2018.11
© Danfoss | DCS (az) | 2018.11
1
3
2
Danfoss
32F1011.20
Allen key 5 mm
Danfoss
32F1013.10
Danfoss
32F877.20
1
3
2
Remove strainer
from valve body
Dismount strainer
5 mm
allen key
Torque 6 Nm ± 1
Clean or replace strainer
and replace O-ring
5 mm allen key
4
5
6
Assemble strainer
Oil O-rings and place
strainer in valve
Mount the strainer
with screws
7
8
A
B
C
D
1
3
2
Danfoss
32F855.10
A
B
C
D
Remove ejector from valve body Replace complete ejector
Mount the ejector with screws
Oil O-rings and place ejector
= compressor oil
Allen key 5 mm
Allen key 5 mm
Allen key 5 mm
Torque 10 Nm ± 1
Allen key 5 mm
Torque 10 Nm ± 1
Danfoss
32F1012.10
A
B
C
DKRCC.PI.VM0.B3.02 | 1
DKRCC.PI.VM0.B3.02 | 4
Installation guide
Multi Ejector (Spareparts)
Type CTM 1, CTM 2, CTM 6
Service on ejector / O-rings
Remove ejector from
valve body
Replace complete ejector/
For service on O-rings:
replace O-rings A, B and C
Oil O-rings and place ejector
Tightening sequence
Allen key 5 mm
Torque 10 Nm ± 1
Mount the ejector with screws
Allen key 5 mm
© Danfoss | DCS (az) | 2018.11
© Danfoss | DCS (az) | 2018.11
1
3
2
4
Danfoss
32F1007.30
Allen key 5 mm
1
3
2
4
Danfoss
32F1007.30
Allen key 5 mm
Danfoss
32F1008.20
5
6
Danfoss
32F1008.20
5
6
Danfoss
32F897.10
A
B
C
D
Danfoss
32
F898.20
8
Allen key 5 mm
7
Danfoss
32F899.20
D
E
A
B
C
D
Danfoss
32F1000.11
Torque 6 mm screws: 10 Nm ± 1 Nm
Torque 6 mm screws: 10 Nm ± 1 Nm
Torque 8 mm screws: 27.5 Nm ± 2.5 Nm
Allen key 5 mm
Allen key 5 mm
Allen key 6 mm
Danfoss
32F1006.10
Torque 6 mm screws: 10 Nm ± 1 Nm
Torque 6 mm screws: 10 Nm ± 1 Nm
Allen key 5 mm
Allen key 5 mm
B
D
Torque 6 mm screws: 10 Nm ± 1 Nm
CTM 1 - CTM 2
CTM 6
DKRCC.PI.VM0.B3.02 | 3
DKRCC.PI.VM0.B3.02 | 2
Service on strainer
Remove strainer from valve body
Dismount strainer
Allen key
5 mm
Allen key 5 mm
Allen key 5 mm
Torque 6 Nm ± 1
Clean / replace strainer/
replace O-rings D and E
Mount strainer with screws
Assemble strainer
Oil O-rings and place strainer in valve
= compressor oil
Tighteninig sequence
Allen key 5 mm
Torque 10 Nm ± 1
Service on connectors
1. Remove connectors with O-rings
2. Replace O-rings and place new connectors
3. Mount new connectors with screws:
- 6 mm screws torque: 10 Nm ± 1 Nm
- 8 mm screws torque: 27.5 Nm ± 2.5 Nm
Tightening sequence
/