Setup Your Gaming Headset
1. Plug the Pink connector into the microphone jack on your computer or sound card.
This connector is typically labeled with a picture of a microphone beside it.
2. Plug the green connector into the headset or line-out jack on your computer or
sound card. This connector is typically labeled with a picture of a headset beside
it.
3. For LED lighting effect plug the USB connector to your USB port on your PC.
(Optional)
Replacing the Ear Cushion
The GHXS21 Headset includes a second set of cloth ear cushions to suit your desired
comfort.
1. The ear cushions are attached to snap off and on plastic plate. You should be able
to pull it off by hand.
2. Once removed you will see the following:
3. Pull the tabs off and then carefully remove the ear cushion. Now you can place on
the new cushions and then line up the two holes on the plate and snap the
cushion back onto the headset
