Sanyo DVW-7200 is a DVD+VCR player. It features a dual-deck design that allows you to watch a DVD while recording a TV show, or vice versa. The player also has a built-in tuner, so you can watch and record live TV without having to connect a separate set-top box. Additionally, the DVW-7200 has a number of other features that make it a versatile and convenient home entertainment device, including:
- Playback of DVDs, CDs, and MP3s
- Recording of TV shows and DVDs
- Built-in tuner for watching and recording live TV
- Parental controls to restrict access to certain content
- Audio and video outputs for connecting to a TV or home theater system
Sanyo DVW-7200 is a DVD+VCR player. It features a dual-deck design that allows you to watch a DVD while recording a TV show, or vice versa. The player also has a built-in tuner, so you can watch and record live TV without having to connect a separate set-top box. Additionally, the DVW-7200 has a number of other features that make it a versatile and convenient home entertainment device, including:
- Playback of DVDs, CDs, and MP3s
- Recording of TV shows and DVDs
- Built-in tuner for watching and recording live TV
- Parental controls to restrict access to certain content
- Audio and video outputs for connecting to a TV or home theater system
Setting the RF output channel
If channel 3 is already occupied for
broadcasting,
1
Set your TV to channel 4.
2
Insert a pre-recorded tape into
this unit.
3
Press [OUTPUT] on the unit so
that the VCR OUTPUT light is lit.
• If noise appears on the TV
screen, press
[VCR/TV] on the remote control.
4
Press [PLAY B] once.
5
After a few seconds, press [PLAY B] on the unit
for 3 seconds.
• The RF output channel will change to channel 4
from channel 3 and you will see a playback pic-
ture.
• When a picture does not appear on the TV screen,
repeat step 4).
6
Press [STOP
CC
] to stop playback.
Initial Programming
1
Press [POWER] and the
language menu will appear.
2
Press [▲] or [▼] to select
language for VCR on-screen
display. Then press
[B].
3
Press [B] again to begin channel
programming. “AUTO SET UP”
will flash.
4
Please wait for a few minutes.
After scanning, the tuner stops on
the lowest memorized channel.
• For details, refer to the Instruction Manual.
VCR
Press first.
DVD Player & Video Cassette Recorder
DVW-7200
Thank you for buying Sanyo.
This guide will enable the quick and easy
setup of your new DVD+VCR, simply follow
the procedures inside.
For further details of features, please refer to
the instruction manual.
INSTRUCTION MANUAL
Is Everything In The Box?
• Remote control
(NA230UD)
with two AA batteries
• RF cable • Audio/Video
cables
• Instruction
manual
1 Connecting
DEW CAUTION
Condensation can form inside the unit when it is suddenly moved from a cold place to a warm or
humid environment. In any such circumstance do not use this unit approximately 2 hours allowing
complete elimination of any condensation.
AUDIO IN
VIDEO IN
ANTENNA
INPUT
R
L
DIGITAL
AUDIO OUT
COAXIAL
ANT-OUT
ANT-IN
AUDI O
OUT
DVD VCR
DVD/VCR
S-VIDEO
OUT
COMPONENT
VIDEO OUT
VIDEO IN
AUDIO OUT
VIDEO OUT
L
LY
R
AUDIO IN
L
R
R
CB/
P
B
CR/
P
R
AUDIO IN
VIDEO IN
ANTENNA
INPUT
R
L
Rear of TV
RF Cable
Video Cable
Audio Cable
RF Cable
Antenna
Rear of this unit
2
Setting the RF Output Channel and Initial Programming
123
456
789
0 +10
STOP
PLAY
POWER
ZOOM
DISPLAY
SPEED
AUDIO
OPEN
CLOSE
DVDVCR
SLOW
EJECT
PAUSE
VCR TV
SKIP CH.
A
-
B
REPEAT
ANGLE
SUBTITLE
T-S E T
MODE
SEARCH
MODE
CLEAR
C.RESET
ENTER
MENU
TOP MENU
SETUP
REC OTR
RETURN
DVD/VCR select button
Select the output source (DVD or
VCR) to view on the TV screen.
To use a VCR, first press
[VCR].
To use a DVD, first press
[DVD].
3 Setting the Clock
1
Press [MENU] and the MAIN
menu will appear.
• If the clock is not set, the
“CLOCK SET” screen appears
when you press
[MENU]. In this
case, go to step 3).
2
Press [o] or [p] to select the
“CLOCK SET” menu. Press
[B]
and the “CLOCK SET” menu will
appear.
3
Press [o] or [p] to select the
month. Press
[B].
4
Press [o] or [p] to select the
day. Press
[B].
5
Press [o] or [p] to select the
year. Press
[B].
6
Press [o] or [p] to select the
hour. Press
[B].
7
Press [o] or [p] to select the
minute. Press
[B].
8
Press [o] or [p] to select
the “AM” or “PM”.
9
Press [B] when finished.
VCR
Press first.
- M E N U -
B TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO [ON]
SAP
CLOCK SET
MONTH DAY YEAR
1 0 / – –– – – –
HOUR MINUTE AM/PM
– – : – –– –
- M E N U -
TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
B CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO [ON]
SAP
CLOCK SET
MONTH DAY YEAR
1 0 / 0 3 2 0 0 5
HOUR MINUTE AM/PM
– – : – –– –
• • • •
CLOCK SET
MONTH DAY YEAR
1 0 / 0 3 MON 2 0 0 5
HOUR MINUTE AM/PM
0 5 : 4 0 P M AM
B PM
Printed in China 81VMN20406--- /
H9880UD/H988AUD ★★★★★
Need help? Call
1-800-813-3435
Weekdays 7:30 AM – 4:00 PM Central Time
LANGUAGE SELECT
B ENGLISH [ON]
FRANÇAIS
ESPAÑOL
CH 01
AUTO SET UP
Inserting the Batteries
Your REMOTE CONTROL HANDSET
is powered by two
AA type batteries.
1
To insert them, push the tab back-
wards and lift off the cover of the
handset.
2
Put the two batteries into the compartment mak-
ing sure the + and – are correctly positioned.
3
Replace the cover.
Quick start guide
• Quick
start guide
TIP:
• To change the on-screen language for
DVD function, refer to page 20 in the
Instruction Manual.
CLOCK SET
MONTH DAY YEAR
1 0 / 0 3 – – – –
HOUR MINUTE AM/PM
– – : – –– –
H9880UD_QG.qxd3 04.12.28 19:08 Page 1
Ajuste del canal de salida RF
Si el canal 3 ya está ocupado con
un canal de TV,
1
Sintonice su TV al canal 4.
2
Coloque una cinta pre-grabada
en esta unidad.
3
Presione [OUTPUT] en la
unidad para que se encienda la luz VCR OUTPUT.
• Si aparece ruido en la pantalla de TV, presione
[VCR/TV] en el mando a distancia.
4
Presione una vez [PLAY B].
5
Después de unos segundos, presione [PLAY B] en
la unidad
durante unos 3 segundos.
• El canal de salida RF cambiará al canal 4 desde
el canal 3 y podrá ver una imagen reproducida.
• Cuando no aparezca ninguna imagen en la pan-
talla de TV, repita el paso 4.
6
Presione [STOP
CC
] para parar la reproducción.
Programación inicial
1
Presione [POWER] y aparecerá
el menú del idioma.
2
Presione [▲] o [▼] para selec-
cionar el idioma para el VCR en
las indicaciones en la pantalla.
Presione
[B].
3
Presione nuevamente [
B
] para
empezar la programación del
canal. Destellará "AJUSTE AUTO".
4
Espere unos minutos. Después de la
búsqueda, el sintonizador se detiene
en el canal memorizado más bajo.
• Para más detalles, consulte el Manual de instruc-
ciones.
VCR
Presione primero .
Reproductor de DVD & Grabador de videocasetes
DVW-7200
Muchas gracias por su compra de un Sanyo.
Esta guía permitirá una instalación rápida y
fácil de su nuevo DVD + VCR, simplemente
siga los procedimientos contenidos.
Para detalles adicionales de las característi-
cas, consulte el manual de instrucciones.
INSTRUCTION MANUAL
¿Está la caja completa?
• Mando a distancia
(NA230UD) con
dos pilas AA
• Cable RF •
Cables de
audio/video
•
Manual de
instrucciones
1 Conexión
PRECAUCION CONTRA HUMEDAD
Puede condensarse humedad dentro de la unidad cuando se mueve repentinamente de un lugar frío a
uno caliente o ambiente húmedo. En ese caso, no utilice esta unidad durante unas 2 horas
aproximadamente para secar completamente toda condensación de humedad.
AUDIO IN
VIDEO IN
ANTENNA
INPUT
R
L
DIGITAL
AUDIO OUT
COAXIAL
ANT-OUT
ANT-IN
AUDI O
OUT
DVD VCR
DVD/VCR
S-VIDEO
OUT
COMPONENT
VIDEO OUT
VIDEO IN
AUDIO OUT
VIDEO OUT
L
LY
R
R
CB/
P
B
CR/
P
R
AUDIO IN
VIDEO IN
ANTENNA
INPUT
R
L
AUDIO IN
L
R
Atrás del TV
Cable RF
Cable de video
Cable de audio
Cable RF
Antena
Atrás de la unidad
2 Ajuste del canal de salida RF y programación inicial
123
456
789
0 +10
STOP
PLAY
POWER
ZOOM
DISPLAY
SPEED
AUDI O
OPEN
CLOSE
DVDVCR
SLOW
EJECT
PAUSE
VCR TV
SKIP CH.
A
-
B
REPEAT
ANGLE
SUBTITLE
T-SET
MODE
SEARCH
MODE
CLEAR
C.RESET
ENTER
MENU
TOP MENU
SETUP
REC OTR
RETURN
Botón de selección de DVD/VCR
Seleccione su fuente de salida
(DVD o VCR) para ver en la pan-
talla del TV.
Para utilizar un VCR, presione
primero
[VCR].
Para utilizar un DVD, presione
primero
[DVD].
3 Ajuste del reloj
1
Presione [MENU] y aparecerá el
menú principal.
• Si el reloj no está ajustado,
aparece la pantalla “AJUSTE DE
RELOJ” cuando presione
[MENU].
Este caso, vaya al paso 3).
2
Presione [o] o [p] para selec-
cionar el menú “AJUSTE DE
RELOJ”. Presione
[B] y apare-
cerá el menú “AJUSTE DE
RELOJ”.
3
Presione [o] o [p] para selec-
cionar el mes. Presione
[B].
4
Presione [o] o [p] para selec-
cionar el día. Presione
[B].
5
Presione [o] o [p] para selec-
cionar el año. Presione
[B].
6
Presione [o] o [p] para selec-
cionar la hora. Presione
[B].
7
Presione [o] o [p] para selec-
cionar los minutos. Presione
[B].
8
Presione [o] o [p] para
seleccionar “AM” o “PM”.
9
Presione [B] cuando se termina.
VCR
Presione primero .
- M E N U -
B PROGRAMAR
AUTOREPETIR [OFF]
AJUSTE CANAL
AJUSTE DE RELOJ
SELEC. IDIOMA
SALIDA DEL AUDIO
TV ESTEREO [ON]
SAP
AJUSTE DE RELOJ
MES DIA AÑO
1 0 / – –– – – –
HORA MINUTO AM/PM
– – : – –– –
- M E N U -
PROGRAMAR
AUTOREPETIR [OFF]
AJUSTE CANAL
B AJUSTE DE RELOJ
SELEC. IDIOMA
SALIDA DEL AUDIO
TV ESTEREO [ON]
SAP
AJUSTE DE RELOJ
MES DIA AÑO
1 0 / 0 3 2 0 0 5
HORA MINUTO AM/PM
– – : – –– –
• • • •
AJUSTE DE RELOJ
MES DIA AÑO
1 0 / 0 3 LUN 2 0 0 5
HORA MINUTO AM/PM
0 5 : 4 0 P M AM
B PM
¿Necesita ayuda? Llame al
1-800-813-3435
Días laborales: 7:30 AM – 4:00 PM Hora central
SELEC. IDIOMA
ENGLISH
FRANCAIS
B ESPAÑOL [ON]
CA 01
AJUSTE AUTO
Colocación de las pilas
Su MANDO A DISTANCIA funciona
con dos pilas de tipo
AA.
1
Para colocarlas, empuje la lengüe-
ta hacia atrás y levante la cubierta
del mando.
2
Ponga las dos pilas en el portapilas asegurán-
dose que los + y – sean los correctos.
3
Vuelva a cerrar la cubierta.
Quick start guide
•
Guía de
inicio rápido
SUGERENCIA:
•
Para cambiar el idioma en la pantalla
para la función DVD, consulte la página
40 en el manual de instrucciones.
AJUSTE DE RELOJ
MES DIA AÑO
1 0 / 0 3 – – – –
HORA MINUTO AM/PM
– – : – –– –
H9880UD_QG.qxd3 04.12.28 19:08 Page 2
-
1
-
2
Sanyo DVW-7200 is a DVD+VCR player. It features a dual-deck design that allows you to watch a DVD while recording a TV show, or vice versa. The player also has a built-in tuner, so you can watch and record live TV without having to connect a separate set-top box. Additionally, the DVW-7200 has a number of other features that make it a versatile and convenient home entertainment device, including:
- Playback of DVDs, CDs, and MP3s
- Recording of TV shows and DVDs
- Built-in tuner for watching and recording live TV
- Parental controls to restrict access to certain content
- Audio and video outputs for connecting to a TV or home theater system
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- español: Sanyo DVW-7200 Guía de inicio rápido
