Page is loading ...
ENGLISH
1
© 2011 All rights reserved.
Polaroid and Polaroid & Pixel are trademarks of PLR IP Holdings, LLC, used under license.
All other trademarks are the property of the respective owner, who has not sponsored,
endorsed or approved this product. PLR IP Holdings, LLC does not manufacture this
product or provide any Manufacturer’s Warranty or support. This product is manufactured,
distributed and sold by Starlight Marketing (H.K.) Ltd.
Product features, specifications, and appearances are subject to change without notice.
Changes are periodically made of this document. Changes, technical inaccuracies, and
typograhical errors will be corrected in subsequent editions.
For service, support, and warranty information, visit www.polaroid.com
Getting Started
Carefully remove the LED TV and all other items from the box. You may wish to store the packaging
for future use.
Please read these instructions thoroughly before use.
In the Box
Inside the box you will find:
• LED TV
• Remote Control & Battery x 2
• User Guide
PLR IP Holdings, LLC, its licensees and affiliates, fully supports all electronic waste initiatives.
As responsible stewards of the environment, and to avoid violating established laws, you should
properly dispose of this product in compliance with all applicable regulations, directives or other
governances in the area where you reside. Please check with local authorities or the retailer where
you purchased this product to determine a location where you can appropriately dispose of the
product.
You may also go to www.polaroid.com and reference About / Electronic Recycling to learn more
about the specific laws in your area and to locate a collection facility near your home.
If your electronic device has internal memory on which personal or other confidential data may be
stored, you may want to perform a data sanitization process before you dispose of your device
to assure another party cannot access your personal data. Data sanitization varies by the type
of product and its software, and you may want to research the best sanitization process for your
device before disposal. You may also check with your local recycling facility to determine their data
sanitization procedures during the recycling process.
Inserting Remote Control Batteries
Date & Time
Use the favorite channel list
echnical Specification
To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
The apparatus should not be exposed to dripping or splashing, and no objects filled with liquids,
Air flow to the unit should not be impeded by covering the ventilation openings with items, such as
No open flame sources, such as lighted candles, should be placed on the apparatus.
TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EX
TENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE PLUG CAN BE FULLY
INSERTED WITHOUT EXPOSING ANY PARTS OF THE BLADES.
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY IN
THE MAINS PLUG IS USED AS THE DISCONNECT DEVICE, THE DISCONNECT DEVICE
SHOULD REMAIN READILY OPERABLE.
IN ORDER TO DISCONNECT THE APPARATUS FROM THE MAINS COMPLETEY, THE MAINS
PLUG SHOULD BE DISCONNECTED FROM THE MAINS SOCKET OUTLET COMPLETELY.
that may be of sufficient mag
WARNING: TO REDUCE THE
BACK). NO USER-SERVICE-
ABLE PARTS INSIDE, REFER
SERVICING TO QUALIFIED
Before using this unit, be sure to read all operating instructions carefully. Please note that these are
(including amplifiers) that produce heat.
If the provided plug does not fit into your outlet, consult an electrician for replacement of
specified by the manufacturer.
, stand, tripod, bracket, or table specified by the manufac-
the cart/apparatus combination to avoid injury from tipover.
to qualified service personnel. Servicing is required when the apparatus has
objects have fallen into the apparatus, or when the apparatus has been exposed to rain or moisture,
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
• Consult the dealer or an experienced radio technician for help.
Caution: changes or modifications not expressly approved by the party responsible for
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
blade wider than the other). This plug will fit into the power outlet only one way. This is a safety
should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the
wire grounding-type plug, a plug having a third (grounding) prong. This plug will only fit into a
connection to grounding electrodes, and requirements for the grounding electrode. See fig. A on
result in a risk of fire or electric shock.
Never insert objects of any kind into this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or electric shock. Never spill liquids of
Unplug this product from the wall outlet and refer servicing to qualified service personnel under the
b. If liquid has been spilled, or objects have fallen into the product,
d. If the product does not operate normally by following the operating instructions. Adjust only
those controls that are covered by the operating instructions as an improper adjustment of
other controls may result in damage and will often require extensive work by a qualified
Unauthorized substitutions may result in fire, electric shock, or other hazards.
Upon completion of any service or repairs to this product, ask the service technician to perform
that provides guidelines for proper grounding and, in particular, specifies that the cable ground
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
a. Use No.10AWG (5.3mm
d. Use jumper wire not smaller than No.6AWG (13.3mm
•
•
Place the unit on a flat and even surface.
•
Do not restrict the air-flow of the unit by placing it in a location with poor ventilation,
•
•
•
Please read IMPORTANT SAFETY INSTRUCTIONS
1. Power Button
2. Channel up/down Buttons
3. Volume up/down Buttons
4. Menu Button
5. Input Button
You can enjoy picture, sound and a PC monitor by connecting a DVD player, video game system or
• For the cable, use a commercially available audio/video cable.
• For more information about external device connections, see the operation manuals of your
• Make sure that the corresponding cables are connected to each input. Connecting other cables
• VIDEO and S-VIDEO inputs: If your external device has an S-VIDEO output, S-VIDEO
connection is recommended. S-video provides a finer, more detailed picture. If inputs are
• Component Input (YPbPr): Picture can be displayed only when a 480i or 480p or greater signal is
MENU
ENTER
CH-LIST
SLEEP ZOOM
PP INFO
AUDIO CCD
FAVORITE
VOL
CH
GUIDE
SWAP
INPUT MUTE
Refit the cover.
Please ensure batteries are disposed safely. Never dispose batteries in a fire or with household
as sunshine, fires or the like.
• Do not attempt to recharge, short-circuit, disassemble, heat or throw the batteries into the fire.
• Placing with wrong or mixed polarities batteries will result in damage to the batteries and/or may
• Do not mix old and new batteries.
• Dispose of batteries properly in accordance with local law.
• Do not mix alkaline, standard (carbon-zinc),or rechargeable (nickel-cadmium) batteries.
•
•
” button to confirm.
•
” button to confirm.
• Press the “
• Press the “
• Press the “
• Press the “
• Press the “
•
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
• Press the “
• Press the “
• Press the “
• There are four modes for picture with different effect.
• Press the “
• Press the “
•
!!!!!!!
!!!!!!
!!
!!!!!!!!!!
!!!!!!!!
teries in the remote, you are ready to use the TV. The first thing you should do is program your TV to
•
•
•
•
•
cess is finished then the first memorized channel
•
•
•
•
•
•
When you power ON the unit for the first time, the screen will show the initial setup dialog.
•
•
!!!!!!!
!!!!!!
!!
!!!!!!!!!!
!!!!!!!!
•
•
•
finished the first memorized station will appear
!!!!!!!
!!!!!!
!!
!!!!!!!!!!
!!!!!!!!
•
•
•
•
•
•
•
• Press the
• In sub-menu press the
light desired item that you want to adjust, then
•
•
•
•
•
•
which you want to adjust, then press the “
•
adjust feature for PC mode).
•
•
•
•
•
•
!!!!!!!
!!!!!!
!!
!!!!!!!!!!
!!!!!!!!
lf “Unsupported” appears on the screen, adjust the PC display setting to correspond to one of the
• Press the
• In sub-menu press the
light desired item that you want to adjust, then
•
•
•
•
!!!!!!!
!!!!!!
!!
!!!!!!!!!!
!!!!!!!!
•
•
•
•
•
•
•
•
•
•
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
•
•
•
•
•
•
•
!!!!!!!
!!!!!!
!!
!!!!!!!!!!
!!!!!!!!
•
•
on-screen text in conjunction with the audio
•
•
•
!!!!!!!
!!!!!!
!!
!!!!!!!!!!
!!!!!!!!
• Press the “
• Press the numeric buttons(
• Press the
• Press the “
• Press the “
• Repeat the same procedure for other channels.
•
• ln digital TV mode, select a channel you want to watch.
• Press the “
• By repeatedly pressing the “
• Press the “
• Press the “
• Press the “
• Press the “
• Press the “
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
• Make sure the TV is plugged in.
• Make sure MUTE is not set on.
• Make sure the POWER is on.
• Make sure a headphone is not inserted.
• If there is neither picture nor sound, unplug the TV for 30 seconds, then plug it in and try again.
• Try another station. If the other stations are OK, it may be a station problem.
• Check that the antenna is connected and adjusted correctly, in good working order and has no
• See if anything is interfering with the antenna signal.
• Try another station. If the other stations are OK, it may be a station problem.
• Check that the antenna is connected and adjusted correctly, in good working order and has no
• Try another station. If the other stations are OK, it may be a station problem.
• Check that the antenna is connected and adjusted correctly, in good working order and has no
• Try another station. If the other stations are OK, it may be a station problem.
• Check that the antenna is connected and adjusted correctly, in good working order and has no
• See if anything is interfering with the antenna signal.
• Make sure the TV is plugged in.
• Make sure there are fresh batteries in the remote control.
• Make sure there is nothing blocking the remote control signal.
• In the password screen, enter the universal password “5963”. After using the universal password,
!!!!!!
!!!
!!!!!!!!!!!!!!!!!!!
This television receiver represents a fine example of electronic engineering and construction. As
such it should be treated with care. We offer the following suggestions so you will enjoy this product
ATSC(8VSB terrestrial) ATSC compliant 8VSB
Antenna 75-ohm external antenna terminal for VHF/UHF
Support definition 480i, 480p, 720p, 1080i, 1080p
Remote Control Batteries AAA x 2
v
Design and specifications are subject to change without notice.
Technical Specification
/
