INSTALLATION INSTRUCTIONS
Product Date Form #
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
Screen Support
7160-0060
5/16/2008
INST-345
7160-0060 SCREEN SUPPORT
Use two #8-32 x .38 long phillips drive screws to
attach the screen support to two threaded inserts in
the right side of the the dock electrical box.
Note: The screen support option can only be mounted
on the right side of the electrical box.
Do not use screws longer than those supplied as
componets inside the electrical box may be damaged.
8-32 x .38 SCREWS
7160-0060 SCREEN SUPPORT