Procedure
1. You should start by inserting the SIM card and then plug the power adapter to the B593 4G
router. The SIM card must be inserted on the right side when looking at the front of the
router. You can see the SIM card slot in the LTE CPE B593. The power plug must be inserted
behind the router.
2. Now you need to connect the router to your computer via the wireless network (WiFi). You
will find the router’s name and network code on the sticker behind the router.
WLAN – Name (SSID) is the router’s name and WLAN – Key (WPA/WPA2) is the router’s
wireless network password. When you first connect the router via WiFi, it would be necessary to
enter the WLAN key and get connected.
If you experience problems connecting to the router with the information on the back of the
router, this information may be changed. Press reset on the side of the router with a ball pen for
about 20 seconds and try again.
3. Once connected, open your Internet browser (e.g. Internet Explorer, Chrome or Safari) and in
the address bar type the routers address http://192.168.1.1 (or Homerouter.cpe). It’s the device
website on the label.
The default language is English, but you can choose your preferred language. The username
is admin and the password is admin (lowercase). You can also find both the router’s address
and password on the sticker behind the router.
4. The router will ask you to change the password when you login. You can ignore it. Your
router is already secured with the unique network code that you entered earlier in order to
connect to the router.
5. Now select Setup Wizard on the left menu.
You must validate your PIN to the SIM card. You will find PIN 1 on the frame (where you took
the SIM card out of the scrape area). Then click Validate. Tick Enable next to Save my
PIN and press Next.
Please note that the router stores the PIN code for the SIM card. Put one new SIM card in the
router at a time; enter the PIN code for the new SIM card in the same way.
But if you use the unlocked B593 Router, it’s unnecessary to do this. 4GLTEMALL.com is
selling the unlocked B593 Router.
6. You do not need to change anything in the next section called Internet.
The network mode is by default Auto and the Connection Mode is Always On. Please note that
'LTE Only' means '4G Only' and 'WCDMA only' means '3G only' in the Network mode. You
can try to isolate the signal to one of them if you wish. If you set it as Auto (recommended), the
router will always try to use 4G as a primary connection. Press Next.
7. You do not need to change anything in the next section called WLAN.
If you want to call your router something other than WLAN1-xxxx (its SSID), you need to
change. We do not recommend that you do and then you will always be able to find the router’s
name on the back of the router if you do not change it. Press Next.
8. We do not recommend that you change the following in the next point WLAN Security. The
Network code field is WPA with pre-shared key. This code is already unique and you should
only use it once when you connect to the router for the first time on your computer or your
mobile. You will also be able to find the network code on the back of the router if you ever need
it again later.
If you want to change it anyway, you must enter a code of minimum 8 characters and press Next.
Otherwise, press Next without changing the information below.
9. Now press Submit and your router will reboot and you will be on the internet.
10. Repeat point 2 for all devices to connect with the Internet.
Color Codes
Color Coding Mode on the front of the router the purple color means that the router lacks the
PIN. The blue color means that you are on 4G. The green color means that you are on 3G.
Firmware upgrade - Quick Guide for upgrade
1. Download the latest HUAWEI B593u-12 firmware upgrade.
2. Save the file to your desktop and unzip the file when you are finished.
3. Open your browser and log in to your router via 192.168.1.1 (username: admin;
password: admin - lower case).
4. Select System > Upgrade > select tar. > press Upgrade, then wait for few minutes, the
system will auto upgrade the firmware of the HUAWEI B593u-12.
These steps are also usable for HUAWEI B593s-22 and HUAWEI B593 other models. The
firmware may vary varies.
-
1
-
2
Huawei B593S-22 User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Swisscom Huawei Router B593s-22 Operating instructions
-
Yeacomm YF-P21 Indoor CPE 4G WiFi Router User manual
-
Draytek Vigor2135 Owner's manual
-
Robustel R3000 Quad User guide
-
-
-
Draytek Vigor2927 Owner's manual
-
-
-
