2. Industrial & lab equipment
  3. Electrical equipment & supplies
  4. Electrical controls
  5. Electrical timers
  6. Bauhn
  7. PS42309C

Bauhn PS42309C Getting Started Manual

  • Hello! I am an AI chatbot trained to assist you with the Bauhn PS42309C Getting Started Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
UNPACK
Remove the Bauhn 7-Day Digital Timer from the box.
SET THE CLOCK
Press the CLOCK button for 3 seconds to enter
clock mode.
SET THE TIME
Press the SET then the UP button to change the hour.
Press SET then the UP button again to change the
minutes and SET then the UP button again to adjust the
days of the week. Press OK to nish setting the time.
Please Note: The clock is set in 24 hour format.
PROGRAM THE TIMER
Press the PROG button to enter timer mode.
The program number will be displayed at the bottom of
the screen. Press the PROG button repeatedly to scroll
through all programs. Select an ON time.
Model Number: PS42309C
1
2
3
4
GETTING STARTED GUIDE
7-DAY DIGITAL TIMER
smart power
5
6
7
8
9
SET THE ON TIME
Press SET to edit the time. Press the UP button to
change the value and press SET to toggle HOURS,
MINUTES and WEEKS. Press PROG to Conrm.
Please Note: WEEKS refers to the day of the week you
are programming.
SET THE OFF TIME
Repeat step 5 with an OFF timer selected.
Press OK to conrm.
FINISH SETUP
When your desired day cycle is shown on the screen,
press the CLOCK button to exit the programming mode.
CONNECT TO POWER
Plug the Digital Timer into a powerpoint. Plug your
appliance into the Digital Timer. Finally switch the
powerpoint ON.
ACTIVATE THE TIMER PROGRAMS
Press the SET button until AUTO appears. Your Digital
Timer will now operate per your programmed times.
Model Number: PS42309C
7-DAY DIGITAL TIMER
GETTING STARTED GUIDE
/