Vizio VP42HDTV20A User manual

VIZIO VP422 HDTV10A User Manual

Version 5/29/2008 1

www.VIZIO.com

Dear VIZIO Customer,

Congratulations on your new VIZIO VP422

HDTV10A High Definition Plasma Television

purchase. Thank you for your support. For

maximum benefit of your set, please read these

instructions before making any adjustments, and

retain them for future reference. We hope you will

experience many years of enjoyment from your

new VIZIO VP422 HDTV10A.

For assistance, please call (877) 698-4946 or e-

mail us at

[email protected]

.

To purchase or inquire about accessories and

installation services for your VIZIO PLASMA

HDTV, please visit our website at

www.VIZIO.com

or call toll free at 888-VIZIOCE

(888-849-4623).

We recommend you register your VIZIO VP422

HDTV10A either at our website

www.VIZIO.com

or fill in your registration card and mail it in. For

peace of mind and to protect your investment

beyond the standard warranty, VIZIO offers on-

site extended warranty service plans. These

plans give additional coverage during the

standard warranty period. Visit our website or call

us to purchase a plan.

Write down the serial number located on the back

of your VIZIO VP422 HDTV10A.

__ __ __ __ __ __ __ __ __ __ __ __ __ __

Purchase Date _____________________

VIZIO is a registered trademark of V, Inc. dba V, INC.

HDMI logo and “High Definition Multimedia Interface”

are registered trademarks of HDMI Licensing LLC.

Manufactured under license from Dolby Laboratories

Dolby and the double-D symbol are trademarks of Dolby Laboratories

VIZIO VP422 HDTV10A User Manual

Version 5/29/2008 2

www.VIZIO.com

Important Safety Instructions

Important Safety InstructionsImportant Safety Instructions

Important Safety Instructions

This product is designed and manufactured to operate within defined design limits, and misuse

may result in electric shock or fire. To prevent the product from being damaged, the following

rules should be observed for the installation, use and maintenance of the product. Read the

following safety instructions before operating the display. Keep these instructions in a safe place

for future reference.

• To reduce the risk of electric shock or component damage, switch off the power before connecting other components to the VP422

HDTV10A.

• Unplug the power cord before cleaning the VP422 HDTV10A PLASMA. A damp cloth is sufficient for cleaning the VP422 HDTV10A. Do

not use a liquid or a spray cleaner for cleaning the product. Do not use abrasive cleaners.

• Always use the accessories recommended by the manufacturer to insure compatibility.

• When moving the VP422 HDTV10A from an area of low temperature to an area of high temperature, condensation may form on the

housing. Do not turn on the VP422 HDTV10A immediately after this to avoid causing fire, electric shock or component damage.

• Do not place the VP422 HDTV10A on an unstable cart, stand, or table. If the VP422 HDTV10A falls, it can injure a person and cause

serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the VP422 HDTV10A.

• A distance of at least 3 feet should be maintained between the VP422 HDTV10A and any heat source, i.e. radiator, heater, oven,

amplifier etc. Do not install the product close to smoke. Operating the product close to smoke or moisture may cause fire or electric

shock.

• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the VP422

HDTV10A and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the VP422 HDTV10A in

a bookcase or cabinet unless proper ventilation is provided.

• Never push any object into the slot on the VP422 HDTV10A cabinet. Do not place any objects on the top of the product. It could short

circuit parts causing a fire or electric shock. Never spill liquids on the VP422 HDTV10A.

• The VP422 HDTV10A should be operated only from the type of power source indicated on the label. If you are not sure of the type of

power supplied to your home, consult your dealer or local power company.

• The power cable must be replaced when using different voltage from that specified in the User Manual. For more information, contact

your dealer.

• The VP422 HDTV10A is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only

into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire

plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely.

Do not defeat the safety purpose of the grounded plug.

• Appliance inlet (or AC inlet) is used as the disconnect device.

• Use only with the cart, stand, tripod, bracket or table specified by manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

• The lightning flash with arrowhead symbol , within an equilateral triangle, is intended to alert the user to the

presence of not isolated dangerous voltage within the inside of the product that may be sufficient magnitude to

constitute a risk of electric shock to persons.

• The exclamation point within an equilateral triangle is intended to alert the user

to

the presence of important operating and servicing instructions in the literature

accompanying the appliance.

• Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

• The wall socket shall be installed near the equipment and shall be easily accessible.

• Only the marked power source can be used for the product. Any power source other than the specified

one may cause fire or electric shock.

• Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.

• Unplug the unit during a lightening storm or when it will not be used for long period of time. This will protect the VP422 HDTV10A from

damage due to power surges.

• Do not attempt to repair or service the product yourself. Opening or removing the back cover may expose you to high voltages, the risk

of electric shock, and other hazards. If repair is required, please contact your dealer and refer all servicing to qualified service personnel.

• Keep the product away from moisture. Do not expose this appliance to rain or moisture. If water penetrates into the product, unplug

the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.

• Do not use the product if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your

dealer immediately. Do not try to repair the product yourself.

• Avoid using dropped or damaged appliances. If the product is dropped and the housing is damaged, the internal components may

function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of the product may cause

fire or electric shock.

• Do not install the product in an area with heavy dust or high humidity. Operating the product in environments with heavy dust or high

humidity may cause fire or electric shock.

• Follow instructions for moving the product. Ensure that the power connector and any other cables are unplugged before moving the

product.

• Hold the power connector when removing the power cable. Pulling the power cable itself may damage the wires inside the cable and

cause fire or electric shock. When the product will not be used for an extended period of time, unplug the power connector.

• To reduce risk of electric shock, do not touch the connector with wet hands.

•

VIZIO VP422 HDTV10A User Manual

Version 5/29/2008 3

www.VIZIO.com

• Insert batteries in accordance with instructions. Incorrect polarities may cause damage and leakage of the batteries, operator injury

and contamination the remote controller.

• If any of the following occurs please contact the dealer:

o The power connector fails or frays.

o Liquid sprays or any object drops into the VP422 HDTV10A.

o The Display is exposed to rain or other moisture.

o The Display is dropped or damaged in any way.

o The performance of the Display changes substantially.

• Operating environment. Temperature: 0˚C ~ 35˚C, Humidity: 20% ~ 80% non-condensing, Altitude: 0 ~ 2000m

Television Antenna Connection Protection

Television Antenna Connection ProtectionTelevision Antenna Connection Protection

Television Antenna Connection Protection

External Television Antenna

External Television AntennaExternal Television Antenna

External Television Antenna Grounding

Grounding Grounding

Grounding

If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the

antenna or cable system is electrically grounded to provide some protection against voltage surges and

static charges.

Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper

grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge

unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding

electrodes, and requirements of the grounding electrode.

Lightning Protection

For added protection of the High Definition TV during a lightning storm or when it is left unattended or

unused for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable

system.

Power Lines

Do not locate the antenna near overhead light or power circuits, or where it could fall into such power

lines or circuits.

Remember, the screen of the coaxial cable is intended to be connected to earth in the building

installation.

VIZIO VP422 HDTV10A User Manual

Version 5/29/2008 4

www.VIZIO.com

Opening the Package

Opening the PackageOpening the Package

Opening the Package

Your VIZIO VP422 HDTV10A and its accompanying accessories are carefully packed in a cardboard

carton that has been designed to protect it from transportation damage. Now you have opened the carton

check that the VP422 HDTV10A is in good condition and that all of the accessories are included.

The VP422 HDTV10A weighs approximately 63lbs and is about 42” wide and we advise that you take

sensible lifting precautions when you unpack and install the HDTV.

The screen can easily be scratched or broken so please handle the product gently and never place the

HDTV with the glass facing downwards on a surface without protective padding.

IMPORTANT: Save the carton and packing material for future shipping.

Package Contents

Package ContentsPackage Contents

Package Contents

VIZIO VP422 HDTV10A

VIZIO Remote Control VR2

Power Cord

This User Manual

Quick Setup Guide

Safety Strap

Registration Card

VIP Services Brochure

2 (Double A) Batteries for the Remote Control

VIZIO Warranty and Repair Information

VIZIO VP422 HDTV10A User Manual

Version 5/29/2008 5

www.VIZIO.com

Additional Certified Accessories

Additional Certified AccessoriesAdditional Certified Accessories

Additional Certified Accessories for the VIZIO

for the VIZIO for the VIZIO

for the VIZIO

VP422 HDTV10A are sold separately

VP422 HDTV10A are sold separatelyVP422 HDTV10A are sold separately

VP422 HDTV10A are sold separately

Wall Mounts

High Definition Cables

Extra or replacement Remote

VIZIO also offers Installation Services and Extended Warranty Services for your VIZIO VP422 HDTV10A

To purchase or inquire about additional accessories and services for your VIZIO product, visit our web

site at www.VIZIO.com or call us toll free at 888-VIZIOCE (888-849-4623)

Installation Preparation

Installation PreparationInstallation Preparation

Installation Preparation

Please read this user manual carefully before installing your VIZIO HDTV.

The power consumption of the High Definition TV is about 350W, please use the power cord designated

for TV. When an extension cord is required, use one with the correct power rating. The cord must be

grounded and the grounding feature must not be defeated.

The TV should be installed on a flat surface to avoid tipping. For proper ventilation, you must allow space

between the back of the High Definition TV and the wall. If you would like to mount your TV on the wall,

please see below ‘Preparing Your PLASMA HDTV for Wall Mounting’ for additional information. Avoid

installing the TV in places with high humidity, dust or smoke so as not to shorten the service life of the

electronic components.

Install the TV in landscape orientation; any 90˚ clockwise or counter-clockwise installation may induce

poor ventilation and excessive component damage.

VIZIO offers professional installation services. Please contact VIZIO for more information on these

services at 888-VIZIOCE (888-849-4623) or www.VIZIO.com.

Attaching the Safety Strap

Attaching the Safety StrapAttaching the Safety Strap

Attaching the Safety Strap

For when the VP422 HDTV10A is not mounted on the wall with a Wall Mount, a Safety Strap has been

included to attach the HDTV to the wall to reduce the chance of the HDTV being pulled over. The Safety

Strap should be used with common sense practice such as ensuring that children (or adults) do not climb

up, grabbing the top of the HDTV and pulling it onto themselves.

1. Fix one end of the strap to the wall. If you have a drywall

finish it is preferable to fix it to a stud, using a washer

underneath the screw head. If you have a solid wall you

should use a lag bolt, again using a washer under the nut.

2. Fix the other end of the Safety

Strap to one of the upper wall

mounting holes on the back of

the HDTV, using a washer

under the screw head.

VIZIO VP422 HDTV10A User Manual

Version 5/29/2008 6

www.VIZIO.com

Preparing Your PLASMA HDTV for Wall Mounting

Preparing Your PLASMA HDTV for Wall MountingPreparing Your PLASMA HDTV for Wall Mounting

Preparing Your PLASMA HDTV for Wall Mounting

To remove the stand base

To remove the stand baseTo remove the stand base

To remove the stand base

1. Unplug all of the cables and cords

from your VIZIO VP422 Plasma

HDTV10A.

2. Place the VP422 PLASMA face

down on a soft and flat surface

(blanket, foam, cloth, etc) to

prevent any damage to the TV.

3. Remove the cover on the stand.

4. Remove the eight (8) screws

holding the base to the VP422

PLASMA.

5. Carefully remove the stand base.

Now, the VP422 Plasma HDTV10A can fit

securely to a mount (sold separately) by

utilizing the mounting holes in the center of

the back panel of the High Definition TV.

Please make sure to read the instructions of

your specific mount to properly hang the

VP422 Plasma HDTV10A.

The pitch of the mounting holes is 400mm

horizontally and 200mm vertically.

The screw type required is metric M6, 20mm

long, 1.0mm pitch. The length of the screws

will depend on the thickness plate being

attach to the TV; our brackets come with

different length screws.

To find the perfect mount for the VIZIO VP422 Plasma, browse VIZIO’s certified mount selection at

www.VIZIO.com or call directly 888-VIZIOCE (888-849-4623).

VIZIO VP422 HDTV10A User Manual

Version 5/29/2008 7

www.VIZIO.com

Table of Contents

Table of ContentsTable of Contents

Table of Contents

Chapter 1 Basic Controls and Connections

Chapter 1 Basic Controls and ConnectionsChapter 1 Basic Controls and Connections

Chapter 1 Basic Controls and Connections ................................

................................................................

.................................

..

. 9

99

9

1.1 Front Panel..........................................................................................................................................................9

1.2 Right Side Panel Controls ...................................................................................................................................9

1.3 Rear Panel Connections ...................................................................................................................................10

1.4 Right-Side Panel Connection ............................................................................................................................11

1.5 VIZIO Remote Control.......................................................................................................................................12

1.5.1 Insertion of Batteries in the Remote Control ..............................................................................................13

1.5.2 Remote Control Range..............................................................................................................................13

1.5.3 VIZIO Remote Control Precautions ...........................................................................................................13

Chapter 2 Connecting Equipment

Chapter 2 Connecting EquipmentChapter 2 Connecting Equipment

Chapter 2 Connecting Equipment................................

................................................................

.................................................

..................................

................. 14

1414

14

2.1 Which Video Connection Should I Use?............................................................................................................14

2.2 Connecting Coaxial (RF) ...................................................................................................................................15

2.2.1 Using Your Antenna or Digital Cable for DTV /TV .....................................................................................15

2.2.2 Using the Antenna or Cable through your VCR .........................................................................................15

2.3 Connecting Your HDTV Set-Top Box................................................................................................................16

2.3.1 Using HDMI ...............................................................................................................................................16

2.3.2 Using Component Video............................................................................................................................18

2.4 Connecting Your Basic Set-Top Box.................................................................................................................19

2.4.1 Using Composite Video .............................................................................................................................19

2.4.2 Using Coaxial (RF) ....................................................................................................................................19

2.5 Connecting Your DVD Player............................................................................................................................20

2.5.1 Using HDMI ...............................................................................................................................................20

2.5.2 For DVD Players with DVI: ........................................................................................................................21

2.5.3 Using Component Video............................................................................................................................22

2.5.4 Using S-Video (AV)....................................................................................................................................23

2.5.5 Using Composite (AV) Video .....................................................................................................................23

2.6 Connecting Your VCR or Video Camera ..........................................................................................................24

2.7 Connecting an external Receiver/Amp ..............................................................................................................25

2.7.1 Optical Output of Audio received with HD Programs .................................................................................25

2.8 Connecting a PC Computer ..............................................................................................................................26

2.8.1 Preset PC Resolutions...............................................................................................................................27

Chapter 3 Setting Up to Watch Television

Chapter 3 Setting Up to Watch TelevisionChapter 3 Setting Up to Watch Television

Chapter 3 Setting Up to Watch Television ................................

................................................................

.................................

..

.28

2828

28

3.1 Basic PLASMA HDTV Start Up .........................................................................................................................28

3.2 Watching a TV Program ....................................................................................................................................33

3.3 Adjusting Basic HDTV Settings .........................................................................................................................34

3.4 Program Information..........................................................................................................................................35

3.5 Information on HDTV Status .............................................................................................................................35

Chapter 4 Advanced Adjustment of HDTV

Chapter 4 Advanced Adjustment of HDTVChapter 4 Advanced Adjustment of HDTV

Chapter 4 Advanced Adjustment of HDTV................................

................................................................

..................................

....

..36

3636

36

4.1 Using the On Screen Display (OSD) .................................................................................................................36

4.2 DTV / TV Input Picture Adjustment....................................................................................................................37

4.2.1 Picture Mode .............................................................................................................................................37

4.2.2 Brightness..................................................................................................................................................38

4.2.3 Contrast .....................................................................................................................................................38

4.2.4 Color ..........................................................................................................................................................38

4.2.5 Tint.............................................................................................................................................................39

4.2.6 Sharpness .................................................................................................................................................39

4.2.7 Color Temperature.....................................................................................................................................40

4.2.8 Advanced Video ........................................................................................................................................40

4.3 DTV / TV Input Audio Adjustment......................................................................................................................42

4.3.1 Volume ......................................................................................................................................................42

4.3.2 Bass...........................................................................................................................................................42

4.3.3 Treble ........................................................................................................................................................43

4.3.4 Balance......................................................................................................................................................43

4.3.5 Surround....................................................................................................................................................43

4.3.6 Digital Audio Out........................................................................................................................................43

4.3.7 Speakers ...................................................................................................................................................44

4.3.8 Lip Sync.....................................................................................................................................................44

4.4 DTV / TV Tuner Setup.......................................................................................................................................45

4.4.1 Tuner Mode ...............................................................................................................................................45

VIZIO VP422 HDTV10A User Manual

Version 5/29/2008 8

www.VIZIO.com

4.4.2 Auto Search...............................................................................................................................................45

4.4.3 Skip Channel .............................................................................................................................................45

4.4.4 MTS ...........................................................................................................................................................46

4.4.5 Time Zone .................................................................................................................................................46

4.4.6 Daylight Saving..........................................................................................................................................46

4.5 DTV / TV Input Setup ........................................................................................................................................47

4.5.1 Language...................................................................................................................................................47

4.5.2 Sleep Timer ...............................................................................................................................................47

4.5.3 Wide ..........................................................................................................................................................47

4.5.4 Input Naming .............................................................................................................................................48

4.5.5 Closed Caption (CC)..................................................................................................................................49

4.5.6 Closed Caption On Mute (CC On Mute) ....................................................................................................49

4.5.7 Digital Closed Caption Style (Digital CC Style)..........................................................................................50

4.5.8 Reset All Settings ......................................................................................................................................50

4.5.9 Image Cleaner ...........................................................................................................................................50

4.6 DTV / TV Input Parental Control........................................................................................................................51

4.6.1 Channel Block ...........................................................................................................................................51

4.6.2 TV Rating...................................................................................................................................................52

4.6.3 Movie Rating..............................................................................................................................................53

4.6.4 Check for New DTV Rating........................................................................................................................53

4.6.5 Blocked Unrated Programming..................................................................................................................54

4.6.6 Change the Password ...............................................................................................................................54

4.7 HDMI Input Picture Adjustment .........................................................................................................................55

4.8 HDMI Input Audio Adjustment ...........................................................................................................................55

4.9 HDMI Input Setup..............................................................................................................................................55

4.10 Video Input Picture Adjustment .......................................................................................................................56

4.11 Video Input Audio Adjustment .........................................................................................................................56

4.12 Video Input Setup............................................................................................................................................57

4.12.1 Auto Phase (for Component input) ..........................................................................................................57

4.13 Video Input Parental Control ...........................................................................................................................57

4.14 PC Input Picture Adjustment ...........................................................................................................................58

4.14.1 Auto Adjust ..............................................................................................................................................58

4.14.2 Brightness................................................................................................................................................58

4.14.3 Contrast ...................................................................................................................................................59

4.14.4 Color Temperature...................................................................................................................................59

4.14.5 H-SIZE.....................................................................................................................................................60

4.14.6 H. Position ...............................................................................................................................................60

4.14.7 V. Position ...............................................................................................................................................60

4.14.8 Fine Tune ................................................................................................................................................60

4.15 PC Input Audio Adjustment .............................................................................................................................61

4.16 PC Input Setup................................................................................................................................................61

4.17 Understanding Viewing Features ....................................................................................................................62

4.17.1 Viewing Modes ........................................................................................................................................62

4.18 Using a Cable or Satellite Remote ..................................................................................................................63

Chapter 5 Maintenance and Troubleshooting

Chapter 5 Maintenance and TroubleshootingChapter 5 Maintenance and Troubleshooting

Chapter 5 Maintenance and Troubleshooting................................

................................................................

............................................................

........................................................

............................63

6363

63

5.1 Maintenance......................................................................................................................................................63

5.2 Troubleshooting Guide......................................................................................................................................64

5.3 Telephone & Technical Support ........................................................................................................................66

5.4 Compliance .......................................................................................................................................................67

5.5 FCC Class B Radio Interference Statement......................................................................................................67

Chapter 6 Miscellaneous Information

Chapter 6 Miscellaneous InformationChapter 6 Miscellaneous Information

Chapter 6 Miscellaneous Information ................................

................................................................

..........................................

....................

..........68

6868

68

6.1 Specifications ....................................................................................................................................................68

6.2 Glossary – Standard Definitions........................................................................................................................69

6.3 Index .................................................................................................................................................................70

VIZIO VP422 HDTV10A User Manual

Version 5/29/2008 9

www.VIZIO.com

Chapter 1

Chapter 1Chapter 1

Chapter 1 Basic Controls and Connections

Basic Controls and ConnectionsBasic Controls and Connections

Basic Controls and Connections

1.1

1.11.1

1.1 Front Panel

Front PanelFront Panel

Front Panel

POWER ‘VIZIO’ LIGHT– The VIZIO name lights white

when powered on and orange when powered off.

REMOTE CONTROL SENSOR – This is the window

through which all of the remote control signals pass to

the sensor. Point the remote control directly at this

window for the best response to the remote signal.

1.2

1.21.2

1.2 Right Side Panel

Right Side Panel Right Side Panel

Right Side Panel

Controls

ControlsControls

Controls

Power ( ) – Switch the VP422 HDTV10A on by pressing the button once. Press the button again to

turn the VP422 HDTV10A off.

Menu – This button activates the On Screen Display (OSD). If a sub-menu is

active, pressing this button will return to the previous menu level.

Channel +/- – Use these buttons to step up or down the TV channels. While the

OSD is active, these buttons function as up and down controls in the OSD menus.

Volume +/- – Use these buttons to increase or decrease to the speaker volume.

While the OSD is active, these buttons function as left and right controls in the

OSD menus.

Input – Repeated pressing of this buttons steps through the input sources in the

following sequence: TV, AV (S-VIDEO), Component, RGB, HDMI1, HDMI2 and

HDMI3. Once you have stepped through the entire sequence, you will return to

the beginning.

VIZIO VP422 HDTV10A User Manual

Version 5/29/2008 10

www.VIZIO.com

1.3

1.31.3

1.3 Rear Panel Connections

Rear Panel ConnectionsRear Panel Connections

Rear Panel Connections

1. AC IN – Plug-in the supplied AC Power Cord here.

2. SERVICE – This custom communication port is for factory service only. Use of this input for

any purpose other than factory authorized service will void the manufacturer’s

warranty of this equipment.

3. HDMI 1 – Connect the primary source for digital video such as a DVD multimedia player or

set top box through this all digital connector. The white color band on the rear of the High

Definition TV indicates this connection.

4. HDMI 2 – Connect the secondary source for digital video such as a DVD multimedia player or

set top box through this all digital connector. The white color band on the rear of the High

Definition TV indicates this connection. For users who want to connect to a DVI enabled

device, use a DVI-HDMI cable and connect the Analog Audio output of the device to the L+R

AUDIO here. Your VIZIO Certified HDMI and HDMI-DVI cables are available for purchase

from www.VIZIO.com or by calling 888-VIZIOCE (888-849-4623).

5. RGB PC – Connect the video and audio from a computer here. The blue color band on the

rear of the High Definition TV indicates this connection. A 1/8” plug stereo cable is needed to

connect the audio out from the computer to the 1/8” jack connector in the rear of the High

Definition TV.

6. COMPONENT (YPb/CbPr/Cr with Audio L/R) – Connect the primary source for component

video devices such as a DVD Player or set top box here. From left to right, use white for left

audio, red for right audio, green for Y, blue for Pb (or Cb) and red for Pr (or Cr) inputs. The

green color band on the rear of the High Definition TV indicates this connection.

7. AV/S-VIDEO – Connect the source for composite video devices, such as a VCR or video

game. Use the white and red connectors to connect the external audio from the same source.

This connection is on rear side of the High Definition TV. The signal being carried by the S-

Video cable and connector; if connected, will take priority over the video (yellow connector)

RCA connector. Keep in mind that if audio is needed then left (white connector) and right (red

connector) cables are needed to be connected also.

8. OPTICAL AUDIO OUT – When an audio signal is associated with an input which is selected

for viewing, the audio associated with the programming will be available on this SPDIF

Optical connector for connection to your home theatre system. The white color band on the

rear of the TV indicates this connection.

9. ANALOG AUDIO OUT – Connect the audio from the PLASMA HDTV to an external device,

such as a home theatre system, external amplifier or stereo. Speakers cannot be connected

directly to here. The white color band on the rear of the TV indicates this connection.

10. DTV/TV – Connect to an antenna or digital cable (no Cable Box) for Digital TV.*

* For digital TV stations in your area visit www.antennaweb.org.

1

3

6

5

7

9

10

4

2

8

VIZIO VP422 HDTV10A User Manual

Version 5/29/2008 11

www.VIZIO.com

1

1.4

1.41.4

1.4 Right

RightRight

Right-

--

-Side Panel Connection

Side Panel ConnectionSide Panel Connection

Side Panel Connection

1. HDMI 3 - Connect the third source for digital video such as a DVD

multimedia player or set top box through this all digital connector.

The white color band on the side of the TV indicates this

connection.

VIZIO VP422 HDTV10A User Manual

Version 5/29/2008 12

www.VIZIO.com

1.5

1.51.5

1.5 VIZIO Re

VIZIO ReVIZIO Re

VIZIO Remote Control

mote Controlmote Control

mote Control

GUIDE – This button displays program information. Press this button once and the information of the

program being viewed is shown. Press it a second time and the Electronic Programming Guide will

appear in the screen.

POWER – Press this button to turn the TV on from the Standby mode. Press it again to return to the

Standby mode.

TV – Press this button to select TV.

AV – Press this button to select the Audio Video input. Pressing this button

repeatedly will get you to the AV input. Keep in mind that if S-Video cable is

being used, then AV will show the signal going through this input as the S-

video takes priority.

COMP – Press this button to select the Component (YPbPr) input. Pressing

this button repeatedly will take you through the Component input.

HDMI – Press this button to select the HDMI input. Pressing this button

repeatedly will get you through the HDMI (HDMI1, HDMI2 and HDMI3)

different inputs.

MENU – Use this button for the On-Screen Display (OSD) menus. When use

within the OSD menus, pressing this key will make the selection of an option.

- These buttons navigate the On-Screen Display (OSD).

MUTE – This button turns the sound on and off.

LAST – This button recalls the previously viewed channel when it is used in

TV mode; meaning that the TV unit has control over the signal or program

being watched. This button also has different functions when being used in

conjunction with the On-Screen Display (OSD) menu.

VOL (+ or -) – These buttons turn the volume up or down.

CH (+ or -) – These buttons change the channels up or down.

NUMBER BUTTON PAD – Use these

buttons to select a channel or enter a

password.

INPUT – This button allows the user to cycle

through the inputs. Repeatedly pressing of

this button will step you through the input

sources in the following sequence: TV, AV

(S-Video), Component, RGB, HDMI1,

HDMI2 and HDMI3. Once you have stepped

through the entire sequence, you will return

to the beginning.

- (DASH) – When selecting a digital channel

directly, use this button for the separation of

main and sub-channels. For example,

channel 28-2 would be selected by the button sequence 2 8 – 2.

VIZIO VP422 HDTV10A User Manual

Version 5/29/2008 13

www.VIZIO.com

1.5.1

1.5.11.5.1

1.5.1 Insertion of Batteries in the Remote Control

Insertion of Batteries in the Remote ControlInsertion of Batteries in the Remote Control

Insertion of Batteries in the Remote Control

Press and slide out the battery cover by following the direction shown by the molded arrow on the surface

of the cover.

Insert two AA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the

batteries with the (+) and (-) symbols inside the battery compartment.

Press and slide the battery cover back into place.

Precautionary Tips for Inserting the Batteries:

Only use the specified AA batteries.

Do not mix new and old batteries. This may result in cracking or leakage

that may pose a fire risk or lead to personal injury.

Inserting the batteries incorrectly may also result in cracking or leakage

that may pose a fire risk or lead to personal injury.

Dispose of the batteries in accordance with local laws and regulations.

Keep the batteries away from children and pets.

1.5.2

1.5.21.5.2

1.5.2 Remote Control Range

Remote Control RangeRemote Control Range

Remote Control Range

Point the remote control at the remote control sensor to transmit the commands.

Do not place any obstacles between the remote control and the receiver window.

The effective range of the remote control is approximately 30 feet (10 meters) from the front of the

receiver window, 30° to the left and right, 20° up and down.

1.5.3

1.5.31.5.3

1.5.3 VIZIO Remote Control

VIZIO Remote ControlVIZIO Remote Control

VIZIO Remote Control Precautions

Precautions Precautions

Precautions

The remote control should be kept dry and away from heat sources. Avoid humidity.

If the TV responds erratically to the remote control or does not respond at all, check the batteries. If the

batteries are low or exhausted, replace them with fresh batteries.

When not using the remote control for a long period of time, remove the batteries.

Do not take the batteries apart, heat them, or throw them into a fire.

Do not subject the remote control to undue physical stress, such as striking or dropping it.

Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp cloth.

VIZIO VP422 HDTV10A User Manual

Version 5/29/2008 14

www.VIZIO.com

Chapter 2

Chapter 2Chapter 2

Chapter 2 Connecting Equipment

Connecting Equipment Connecting Equipment

Connecting Equipment

2.1

2.12.1

2.1 Which Video Connection Should I Use

Which Video Connection Should I UseWhich Video Connection Should I Use

Which Video Connection Should I Use?

??

?

The VIZIO VP422 HDTV10A has six different ways to connect your video equipment from a basic

connection to the most advanced for digital displays.

Connection

Quality (type)

Connector

Rear

Panel

Color

Codes

Description

Best

(digital)

White

HDMI (High-Definition Multimedia Interface) - It is the

first and only industry-supported, uncompressed, all-

digital audio/video interface. HDMI provides an

interface between any audio/video source, such as a

set-top box, DVD player, or A/V receiver and an

audio and/or video monitor, such as a digital

television (DTV), over a single cable.

Best

(digital)

- - - - - - - - - - - -

Good

(analog)

Black

DTV Coaxial RF. When used for MPEG2 encoded

bit streams from ATSC broadcast programming, this

input takes advantage of the High Definition content.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

TV Coaxial RF. This is the connection for standard

NTSC TV using antenna or cable.

Best

(analog)

Blue

RGB PC (VGA) – This video input has separate red,

green and blue color components. The signal

carries horizontal and vertical sync information on

the green signal. This is most commonly used for

PC input.

Better

(analog)

Green

Component - The video signal is separated into

three signals, one containing the black-and-white

information and the other two containing the color

information. This enhancement over S-Video takes

advantage of the superior picture provided by

progressive scan DVD players and HDTV formats.

Good

(analog)

Yellow

and

Red

Composite (AV) - The complete video signal is

carried through this single (yellow) pin connector.

This is the most commonly used video connection.

S-Video (AV) - The video signal is separated into two

signals, one containing the black-and-white

information and the other containing the color

information. Separating the color in this way avoids

‘cross color’ effects where closely spaced black and

white lines are erroneously displayed in color. It also

enables text to be displayed more sharply.

Note: For more info refer to the Quick Start Guide

VIZIO VP422 HDTV10A User Manual

Version 5/29/2008 15

www.VIZIO.com

2.2

2.22.2

2.2 Connecting Coaxial (RF)

Connecting Coaxial (RF)Connecting Coaxial (RF)

Connecting Coaxial (RF)

2.2.1

2.2.12.2.1

2.2.1 Using Your Antenna or Digital C

Using Your Antenna or Digital CUsing Your Antenna or Digital C

Using Your Antenna or Digital Cable for DTV /TV

able for DTV /TVable for DTV /TV

able for DTV /TV

1. Turn off the power to the HDTV.

2. Connect the coaxial (RF) connector from your antenna or digital cable (out-of-

the-wall, not from the Cable Box) to the DTV/TV CABLE/ANTENNA

connector.

3. Turn on the power to the HDTV.

4. Select DTV using the INPUT button on the remote or side of the High

Definition TV, or directly by pressing the TV button on the Remote Control.

2.2.2

2.2.22.2.2

2.2.2 Using the Antenna or Cable through your VCR

Using the Antenna or Cable through your VCRUsing the Antenna or Cable through your VCR

Using the Antenna or Cable through your VCR

1. Turn off the power to the HDTV and VCR.

2. Connect the “Output to TV”, “RF Out” or “Antenna Out” connector on the rear of

your VCR to the DTV/TV CABLE/ANTENNA connector at the rear of the High

Definition TV.

3. Turn on the power to the HDTV and VCR.

4. Select TV using the INPUT button on the remote or side of the High Definition TV, or directly

by pressing the TV button on the Remote Control.

Note:

a) Not all digital TV broadcasts are High Definition (HD). Refer to the

program guides, or consult your cable, satellite or TV station operator.

b) Digital broadcasts are not available in all areas. Refer to

www.antennaweb.org for detailed information.

c) Make sure the antenna and coaxial cable are correctly grounded.

d) For Professional antenna installation contact us at www.VIZIO.com or

call 1-888-VIZIOCE (1-888-849-4623).

Note: If you have an off-air antenna or cable TV, connect

it to the “Antenna In” connector on the rear of your VCR.

VIZIO VP422 HDTV10A User Manual

Version 5/29/2008 16

www.VIZIO.com

2.3

2.32.3

2.3 Connecting Your HDTV Set

Connecting Your HDTV SetConnecting Your HDTV Set

Connecting Your HDTV Set-

--

-Top Box

Top BoxTop Box

Top Box

2.3.1

2.3.12.3.1

2.3.1 Using HDMI

Using HDMIUsing HDMI

Using HDMI

HDTV Set-Top Boxes that have a HDMI digital interface should be connected to the HDMI input of the

PLASMA HDTV for optimal results.

Connecting

ConnectingConnecting

Connecting your HDTV Set

your HDTV Set your HDTV Set

your HDTV Set-

--

-Top Box (Best)

Top Box (Best)Top Box (Best)

Top Box (Best):

::

:

1. Turn off the power to the HDTV and HDTV Set-Top Box.

2. Connect a HDMI cable to the HDMI output of your HDTV Set-Top Box and the other end to

the HDMI Input (white color area) at the rear of the High Definition TV.

3. Turn on the power to the HDTV and HDTV Set-Top Box.

4. Select HDMI 1 using the INPUT button on the remote or side of the High Definition TV, or

directly by pressing the HDMI button on the Remote Control.

5. If HDMI 1 is being used, use either HDMI2 or HDMI3 as the input and follow steps 1 through

3; and then select the corresponding HDMI input in step 4.

Note: To maintain the display quality, use a VIZIO certified HDMI cable. Length is

available up to 10 meters. See www.VIZIO.com or call 1-888-VIZIOCE (1-888-849-4623)

for details.

Note:

a) The HDMI input on the HDTV supports High-bandwidth Digital Content Protection

(HDCP). HDCP encrypts the transmission between the video source and the

digital display for added security and protection.

b) Refer to your HDTV Set-Top Box user manual for more information about the

video output requirements of the product or consult your cable or satellite operator.

VIZIO VP422 HDTV10A User Manual

Version 5/29/2008 17

www.VIZIO.com

For HDTV Set

For HDTV SetFor HDTV Set

For HDTV Set-

--

-Top Boxes with DVI

Top Boxes with DVITop Boxes with DVI

Top Boxes with DVI:

::

:

1. Turn off the power to the HDTV and HDTV Set-Top Box.

2. Using a HDMI-DVI cable, connect the DVI end to your HDTV Set-Top Box and the HDMI end

to the HDMI Input (white color area) at the rear of the High Definition TV.

3. Using an audio cable (white and red connectors), connect the cable to the audio output

connectors associated with the DVI output on your HDTV Set-Top Box and connect the other

end to the audio connectors associated with the HDMI input (white area) at the rear of the

High Definition TV.

4. Turn on the power to the HDTV and HDTV Set-Top Box.

5. Select HDMI2 using the INPUT button on the remote or side of the High Definition TV, or

directly by pressing the HDMI button on the Remote Control.

Note:

a) The HDMI input on the HDTV supports High-bandwidth Digital Content Protection

(HDCP). HDCP encrypts the transmission between the video source and the

digital display for added security and protection.

b) Refer to your HDTV Set-Top Box user manual for more information about the

video output requirements of the product or consult your cable or satellite operator.

VIZIO VP422 HDTV10A User Manual

Version 5/29/2008 18

www.VIZIO.com

2.3.2

2.3.22.3.2

2.3.2 Using Component Video

Using Component VideoUsing Component Video

Using Component Video

Connecting

ConnectingConnecting

Connecting your HDTV Set

your HDTV Set your HDTV Set

your HDTV Set-

--

-Top Box (Better)

Top Box (Better)Top Box (Better)

Top Box (Better):

::

:

1. Turn off the power to the HDTV and HDTV Set-Top Box.

2. Connect the Y (green color) connector on your HDTV Set-Top Box to the corresponding Y

(green color) connector in the Component group (green color area - row of connectors

nearest to you when viewing from the rear of the High Definition TV) at the rear of the High

Definition TV.

3. Connect the Pb (blue color) connector on your HDTV Set-Top Box to the corresponding Pb

(blue color) connector in the Component group (green color area - row of connectors nearest

to you when viewing from the rear of the High Definition TV) at the rear of the High Definition

TV.

4. Connect the Pr (red color) connector on your HDTV Set-Top Box to the corresponding Pr (red

color) connector in the Component group (green color area - row of connectors nearest to

you when viewing from the rear of the High Definition TV) at the rear of the High Definition TV.

5. Using an audio cable (white and red connectors), connect the cable to the audio output

connectors associated with the Component output on your HDTV Set-Top Box and connect

the other end to the audio connectors associated with the Component input (green color

area) at the rear of the High Definition TV.

6. Turn on the power to the HDTV and HDTV Set-Top Box.

7. Select Component using the INPUT button on the remote or side of the High Definition TV, or

directly by pressing the COMP button on the Remote Control.

Note:

Refer to your HDTV Set-Top Box user manual for more information about the

video output requirements of the product or consult your cable or satellite operator.

VIZIO VP422 HDTV10A User Manual

Version 5/29/2008 19

www.VIZIO.com

2.4

2.42.4

2.4 Connecting Your Basic

Connecting Your BasicConnecting Your Basic

Connecting Your Basic Set

Set Set

Set-

--

-Top Box

Top BoxTop Box

Top Box

2.4.1

2.4.12.4.1

2.4.1 Using Composite Video

Using Composite VideoUsing Composite Video

Using Composite Video

1. Turn off the power to the HDTV and Set-Top Box.

2. Using the AV Cable, connect the Video (yellow color)

connector on your Set-Top Box to the corresponding

Video (yellow color) connector in the AV group (yellow

color area) at the rear of the High Definition TV.

3. Using the white and red connectors, connect the

cable to the audio output connectors associated with

the Video output on your Set-Top Box and connect the other end to the audio connectors

associated with the AV input (yellow color area) at the rear of the High Definition TV.

4. Turn on the power to the TV and Set-Top Box.

5. Select AV using the INPUT button on the remote or side of the High Definition TV, or directly

by pressing the AV button on the Remote Control.

2.4.2

2.4.22.4.2

2.4.2 Using Coax

Using CoaxUsing Coax

Using Coaxial

ialial

ial (RF)

(RF) (RF)

(RF)

1. Turn off the power to the HDTV and Set-Top Box.

2. Using a Coax (RF) cable, connect one end to the TV OUT (RF) on your Set Top Box

and the other end to the DTV/TV input at the rear of the High Definition TV.

3. Turn on the power to the HDTV and Set-Top Box.

4. Select TV using the INPUT button on the remote or side of the High Definition

TV, or directly by pressing the TV button (below the GUIDE button) on the Remote Control.

Note: Refer to your Set Top Box user manual for more information

about selecting the video or RF output of the product.

VIZIO VP422 HDTV10A User Manual

Version 5/29/2008 20

www.VIZIO.com

2.5

2.52.5

2.5 Connecting Your DVD Player

Connecting Your DVD PlayerConnecting Your DVD Player

Connecting Your DVD Player

You have several options for connecting your DVD player to your VIZIO VP422 HDTV10A; HDMI,

Component, AV (S-Video or Composite) inputs. Based on your configuration, you can decide which

option is right for you.

2.5.1

2.5.12.5.1

2.5.1 Using HDMI

Using HDMIUsing HDMI

Using HDMI

DVD players that have a digital interface such as HDMI (High Definition Multimedia Interface) should be

connected to the HDMI input of the VIZIO VP422 HDTV10A for optimal results.

Connecting

ConnectingConnecting

Connecting your DVD Pl

your DVD Pl your DVD Pl

your DVD Player (Best)

ayer (Best)ayer (Best)

ayer (Best):

::

:

1. Turn off the power to the High Definition TV and DVD

player.

2. Connect a HDMI cable to the HDMI output of your DVD

player and the other end to the HDMI Input (white color

area) at the rear of the High Definition TV.

3. Turn on the power to the High Definition TV and DVD player.

4. Select HDMI 1 using the INPUT button on the remote or side of the High Definition TV, or

directly by pressing the HDMI button on the Remote Control.

5. If HDMI 1 is being used, connect to either HDMI 2 or HDMI 3 as the input and follow steps 1

through 3; and then select the corresponding HDMI input step 4.

Note: To maintain the display quality, use a VIZIO certified HDMI cable available up to 10 meters.

See www.VIZIO.com or call 1-888-VIZIOCE (1-888-849-4623) for details.

Page is loading ...

Vizio VP42HDTV20A User manual

This manual is also suitable for

Vizio VP42HDTV20A User manual

Related papers

Other documents