2. Ampire
  3. VSC-E-BM13

Ampire VSC-E-BM13, VSC-E-AU05, VSC-E-BM14, VSC-E-BM15, VSC-E-ME14 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Ampire VSC-E-BM13 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
NavLinkz GmbH - Eurotec-Ring 39 - D-47445 Moers - Germany - www.navlinkz.de - mail@navlinkz.de
VSC-E-AU05/AU11/AU12/BM11/BM13/ME08/ME10/ME13
Vehicle-specic camera
Delivery content
System cable exten-
sion with box 7m
Exchange rear door opener
handle with integrated camera
(exemplifying gure)
Product features
Sensor – Typ 1/4“ CMOS NTSC
Angle horizontal 110°, vercal 90°, diagonal 140°
Mirroring (xed)
Parking guide lines switchable
Water resistance IP 68
Power supply 10V - 15V
Power consumpon 1.5W/200mAh
Video-input RCA connector
Connector cable approx. 7m
Fuse 2A
In case the isolaon of the camera is harmed in the moisture secon close to the camera, it is
mandatory to repair the isolaon. Otherwise the camera will inevitably become moist inside
sooner or later.
Camera not suitable for permanent operaon!
Camera-conguraon
(Cut green cable loop if required)
With guide lines
Whithout guide lines
ACC 12V
Accessory-Power
Connecon scheme: reversing signal generated by a interface
Black-Box
+12 V ONLY if reverse
gear is acvated
To camera
Isolate -
without funcon
To video input
To the reverse cable
of the video interface
Tip for dealers:
Inform your end customers that the rear-
view camera mustn‘t be cleaned by steam
cleaner!
Reverse GND
HAS TO BE connected
to Ground
+
--
Connecon scheme: reversing signal by reversing light
Black-Box
To Video input
To camera
Reverse (+12V)
Reverse GND
+12 V ONLY if reverse
gear is acvated
ACC 12V
Accessory-Power
Note: If the camera is powered by reverse signal we recommend to install a relay between power
supply of reverse signal and power supply of the camera to ensure a stable and uninterrupted
power supply and avoid unwanted errors in the board computer.
Cable labelling of connecon cable
Monitor test (+12V Out)
ACC -
ACC +12V
Cable labelling of connecon cable
Monitor test (+12V Out)
ACC -
ACC +12V
Reversing light
10R-04.1484
Made in China
/