Siemens optiPoint 500 economy Owner's manual

+L3DWK#6333#

+L3DWK#8333#560

+L3DWK#$OO6HUYH/#+LFRP#483#(2+

RSWL3RLQW#833#HFRQRP\

RSWL3RLQW#833#EDVLF

RSWL3RLQW#833#VWDQGDUG

RSWL3RLQW#833#DGYDQFH

2SHUDWLQJ#,QVWUXFWLRQV

2

Before You Begin

These operating instructions describe the optiPoint 500 economy, optiPoint 500 basic,

optiPoint 500 standard and optiPoint 500 advance telephones on your

HiPath 3000 / 5000 RSM.

They describe all functions you can use from your telephone. You may find that some func-

tions you wish to use are not available on your telephone. This may be due to one of the

following reasons:

• The function has not been configured for your telephone - address any questions to

your service personnel.

• Your communications platform does not support this function - contact your service

personnel to upgrade your system.

Important Notes

Never allow the telephone to come into contact with staining or aggressive liquids such as

coffee, tea, juice, or soft drinks. For information on telephone maintenance Æ page 102.

The information provided in this document contains merely general descriptions or charac-

teristics of performance which in case of actual use do not always apply as described or

which may change as a result of further development of the products.

An obligation to provide the respective characteristics shall only exist if expressly agreed

in the terms of contract.

Marks

Do not operate the telephone in environments where there is a danger

of explosions.

Use only original Siemens accessories Æ page 101. Using other acces-

sories may cause a hazard and will invalidate the warranty and the CE

mark.

Never open the telephone or a key module. If you encounter any prob-

lems, contact your service personnel.

The device conforms to the EU guideline 1999/5/EG, as attested by the

CE mark.

This device has been manufactured in accordance with our certified en-

vironmental management system (ISO 14001). This process ensures

that energy consumption and the use of primary raw materials are kept

to a minimum, thus reducing waste production.

Contents

3

Basic operating instructions . . . . . . . . . . . . . . . . . . . . 9

optiPoint 500 economy/basic/standard control panel . . . . . . . . . . . . . . . 9

optiPoint 500 advance control panel with optiPoint key modules . . . . . 10

How to Use these Operating Instructions. . . . . . . . . . . . . . . . . . . . . . . 11

Screen Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Accessing Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

... Interactively . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

... Via the Program/Service Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 12

... With Function Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Functions You Can Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Basic and Enhanced Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Additional Team and Executive/Secretary Functions. . . . . . . . . . . . 13

Using the Telephone Efficiently. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Ø

Basic and Enhanced Functions

Making and Answering Calls . . . . . . . . . . . . . . . . . . 14

Answering a Call With the Handset. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Answering a Call with the Speaker

(Speakerphone Mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Open Listening in the Room During a Call . . . . . . . . . . . . . . . . . . . . . . 15

Switching to Speakerphone Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Switching to the Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Using Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Accepting a Waiting Call (Camp-On) . . . . . . . . . . . . . . . . . . . . . . . . 16

Preventing and Allowing Call Waiting (Automatic Camp-On). . . . . . 17

Turning the Call Waiting Tone On and Off . . . . . . . . . . . . . . . . . . . . 17

Accepting a Specific Call for Your Colleague. . . . . . . . . . . . . . . . . . . . . 18

Rejecting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Using Mailboxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Accessing the Mailbox. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Using Timed Reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Using the Speakerphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Enabling and Disabling Handsfree Answerback. . . . . . . . . . . . . . . . 20

Answering a Call With a Headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Turning Do Not Disturb On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Turning Ringer Cutoff On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Trace Call: Identifying Anonymous Callers (Not for U.S.) . . . . . . . . . . . 22

Turning the Microphone On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Answering Calls from the Entrance Telephone and Opening the Door. 23

Accepting a Call From an Answering Machine . . . . . . . . . . . . . . . . . . . 24

Display Number of Waiting Calls and Overload Indication. . . . . . . . . . . 25

Contents

4

Making Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Off-Hook Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

On-Hook Dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

En-Bloc Sending / Correcting Numbers . . . . . . . . . . . . . . . . . . . . . . 27

Caller ID Suppression . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Talking to Your Colleague With a Speaker Call . . . . . . . . . . . . . . . . . . . 28

Activating Tone Dialing (DTMF Suffix Dialing) . . . . . . . . . . . . . . . . . . . . 29

Automatic Connection Setup (Hotline) . . . . . . . . . . . . . . . . . . . . . . . . . 29

Reserve Trunk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Assigning a Station Number (Not for U.S.) . . . . . . . . . . . . . . . . . . . . . . 30

Trunk Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Associated Dialing/Dialing Aid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Calling Multiple Parties Simultaneously. . . . . . . . .33

Calling a Second Party (Consultation Hold) . . . . . . . . . . . . . . . . . . . . . . 33

Switching to the Party on Hold (Toggle) . . . . . . . . . . . . . . . . . . . . . 33

Conducting a Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Adding Up to Five Parties to the Conference (Initiator Only) . . . . . . 34

Checking Which Parties Are in the Conference (Initiator Only) . . . . 35

Removing Parties From the Conference (Initiator Only) . . . . . . . . . 35

Leaving a Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Ending a Conference (Initiator Only) . . . . . . . . . . . . . . . . . . . . . . . . 35

Removing the ISDN Central Office Party

From the Conference (Only for U.S.) . . . . . . . . . . . . . . . . . . . . . . . . 35

Transferring a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

...After a Speaker Call (Announcement) in a Group . . . . . . . . . . . . . 36

Parking a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Retrieving a Parked Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Placing External Calls on Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Picking up (Retrieving) a Held Call . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Making Calls to Stored Destinations . . . . . . . . . . . .39

Using a Caller List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Retrieving the Caller List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Ending Retrieval. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Displaying the Call Time and Additional Call Information. . . . . . . . . 40

Dialing a Station Number from the Caller List . . . . . . . . . . . . . . . . . 40

Removing an Entry from the Caller List . . . . . . . . . . . . . . . . . . . . . . 40

Saving the Other Party’s Station Number in the Caller List (Redial) 40

Contents

5

Redialing a Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Dialing a Number From the Internal Directory. . . . . . . . . . . . . . . . . . . . 42

Using Repertory Dialing Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Using Station and System Speed-Dial Numbers . . . . . . . . . . . . . . . . . . 43

Displaying and Assigning Call Charges . . . . . . . . . 44

Displaying Call Charges (Not for U.S.) . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Displaying Call Charges for Another Telephone (Not for U.S.) . . . . . . . 45

Dialing with Call Charge Assignment. . . . . . . . . . . . . . . . . . . . . . . . . . . 46

If You Cannot Reach a Destination .... . . . . . . . . . . . 47

Using Callback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Storing a Callback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Answering a Callback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Checking and Canceling a Saved Callback . . . . . . . . . . . . . . . . . . . . 47

Call Waiting (Camp-On) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Busy Override - Joining a Call in Progress. . . . . . . . . . . . . . . . . . . . . . . 49

Telephone Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Adjusting the Ring Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Adjusting the Ring Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Adjusting the Attention Ring Volume . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Adjusting the Speakerphone to the Room Acoustics . . . . . . . . . . . . . . 51

Adjusting the Receiving Volume During a Call. . . . . . . . . . . . . . . . . . . . 51

Adjusting the Display to a Comfortable Reading Angle. . . . . . . . . . . . . 52

Display backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Adjusting the display contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Selecting the Language of Screen Prompts . . . . . . . . . . . . . . . . . . . . . 52

Locking the Telephone to Prevent Unauthorized Use . . . . . . . . . . . . . . 53

Saving Your PIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Saving Station Numbers,

Functions, Procedures and Appointments . . . . . . . 55

Saving Repertory Dialing Numbers on a Key. . . . . . . . . . . . . . . . . . . . . 55

Storing Station Speed-Dial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Assigning Functions to Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Assigning a Procedure (Operating Steps) to a Key . . . . . . . . . . . . . . . . 60

Saving Appointments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Testing the Telephone . . . . . . . . . . . . . . . . . . . . . . . . 63

Testing the Telephone Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Checking the Key Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Contents

6

Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Using Variable Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Using Night Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Call Forwarding in the Carrier Network

and Forwarding Multiple Subscriber Numbers (MSN) (Not for U.S.). . . 66

Using Other Functions. . . . . . . . . . . . . . . . . . . . . . . . .67

Sending a Message. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Displaying and Deleting Messages You Have Sent . . . . . . . . . . . . . 67

Answering Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Leaving an Advisory Message. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Deleting Advisory Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Using Another Telephone Like Your Own . . . . . . . . . . . . . . . . . . . . . . . 69

Change call number (relocate) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Fax Details and Message on Answering Machine . . . . . . . . . . . . . . . . 71

Resetting Services and Functions

(System-Wide Cancellation for a Telephone). . . . . . . . . . . . . . . . . . . . . 71

Silent Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Monitoring a Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Activating Functions for Another Telephone . . . . . . . . . . . . . . . . . . . . . 73

Locking Another Telephone to Prevent Unauthorized Use . . . . . . . . . . 74

Using System Functions from the Outside

(DISA: Direct Inward System Access) . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Using functions in ISDN via code dialing (keypad dialing) . . . . . . . . . . . 76

Controlling Connected Computers or Other Programs and Telephone Data

Service (HiPath 3500/3550/3700/3750 Only). . . . . . . . . . . . . . . . . . . . . 77

Controlling Relays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Sensors (HiPath 3300/3350/3500/3550 Only) . . . . . . . . . . . . . . . . . . . . 78

Radio Paging (Not for U.S.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Simple Paging Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Enhanced Paging Equipment (Hipath 3700/3750 Only) . . . . . . . . . . 79

Contents

7

Ø

Team and Executive/Secretary Functions

Team and Executive/Secretary

Functions With Trunk Keys . . . . . . . . . . . . . . . . . . . . 81

Using Trunk Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Answering Calls With Trunk Keys . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Making Calls with Trunk Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Using a Trunk Key to Place a Call on Hold and Retrieve It Again . . . 82

Switching Between Phone Calls on Multiple Trunks . . . . . . . . . . . . 83

Forwarding Calls on Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Using DSS Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Using DSS Keys to Answer Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Calling a Team Member Directly . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Transferring a Call in Progress. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Accepting a Call for Another Team Member . . . . . . . . . . . . . . . . . . . . . 86

Joining or Leaving a Group Call

(Not for the Executive Telephone in an Executive/Secretary Team) . . . 86

Transferring Calls Directly to the Executive

(Only in an Executive/Secretary Group) . . . . . . . . . . . . . . . . . . . . . . . . . 87

Using Other Team Functions . . . . . . . . . . . . . . . . . . . 88

Turning Group Call On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Accepting a Call for Another Member of Your Team . . . . . . . . . . . . . . 90

Activating and Deactivating a Ringing Group. . . . . . . . . . . . . . . . . . . . . 90

Uniform Call Distribution (UCD). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Ø

System networking via LAN (PC network)

Special Functions in the LAN (PC Network). . . . . . 93

Leaving a Hunt Group/Group Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Transferring Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Using Night Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Activating and Deactivating a Ringing Group. . . . . . . . . . . . . . . . . . . . . 96

Controlling Relays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Opening the Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Contents

8

Ø

All About Your Telephone

Labeling, Documentation and Accessories . . . . . .99

Labeling Key Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Attaching a Station Number Label. . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Fixing Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102

Telephone Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Responding to Error Messages on the Screen . . . . . . . . . . . . . . . . . . 103

Contacts for Resolving Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104

Basic operating instructions

9

Basic operating instructions

optiPoint 500 economy/basic/standard control panel

optiPoint 500

*

economy basic standard advance

Function keys 12 12 12 19

Full-duplex speakerphone

feature

--99

Illuminated display - - - 9

Headset port - - - 9

USB interface - 999

Interface for add-on equipment - 999

Option bays 0112

* The name and model of your telephone are printed on the base of your optiPoint 500.

Keys for

telephone

settings

Display,

2 lines with

24 chars

Keypad

Handset

Key for

confirming

a function

Key field

-

freely program-

mable keys

Speaker for open

listening

and ring tones

Fixed function key:

Release

Microphone for speaker-

phone mode (only

optiPoint 500 standard)

Keys for scrolling to

functions

Key field

- fixed function keys:

Program/Service

Redial

Mute or Internal

Speaker

LEDs

Basic operating instructions

10

optiPoint 500 advance control panel with optiPoint key modules

Keys for

telephone

settings

Iluminated

Display,

2 lines with

24 chars

Keypad

Handset

Key for

confirming

a function

Key field

-

freely programmable keys

Speaker

for open

listening

and ring tones

Fixed

function key:

Release

Microphone for speakerphone

mode

Keys for scrolling to

functions

Key field

- fixed function keys:

Program/Service

Redial

Mute or Internal

Speaker

LEDs

optiPoint key module

with programmable

keys

Basic operating instructions

11

Step by Step

How to Use these Operating Instructions

You will find a graphic representation of the steps in log-

ical sequence in the left column. Below is an explana-

tion of the symbols:

C

Lift the handset (off-hook).

I

Replace the handset (on-hook).

H

Conduct a call.

D

Enter a telephone number or code.

99

Enter the code.

J

or

K

Press volume controls on the telephone.

Press the key.

Press the illuminated key.

Press the flashing key.

The option appears on the screen.

Press the

ã

key to confirm your selection.

Search for an option.

Press the

á

!

keys,

until the option appears on the screen.

Then press the

ã

key to confirm your selection

.

Screen Displays

Line 1 displays prompts or acknowledgment

messages, depending on the situation.

Line 2 displays functions that you can confirm by press-

ing

ã

. If the symbol ">" appears on the right, you can

press

á ! to access further options.

Program/Service

Speaker

Start conference?

Display contrast?

Please dial

Return to held call?

>

Step by Step

Basic operating instructions

12

Accessing Functions

... Interactively

You can select some functions while the telephone is

idle, for example:

Use

á

!

to scroll to a function and press

ã

to

execute it.

You can select other functions directly depending on

the situation. Example: you call a number, but the line

is busy:

Press

ã

to confirm.

or

Use

á

!

to scroll to a function and press

ã

to

execute it.

... Via the Program/Service Menu

First press the "Program/Service" key. You then see a list

of selection options, such as: "#0=Reset services"

Æ page 71.

Press the key.

Use

á

!

to scroll to a function and press

ã

to

execute it.

or

G9 Enter the code directly.

The Quick-Reference Operating Instructions contain a

list of codes. However, they are also displayed on

screen along with the corresponding function.

... With Function Keys

If you saved a function on a key Æ page 57, you can ac-

cess it directly as follows:

Press the Mute key to execute the function.

Forwarding on

Callback

Send message

Program/Service

#0=Reset services?

Basic operating instructions

13

Functions You Can Use

Basic and Enhanced Functions

You can use all basic and enhanced communications platform functions

that appear interactively on the screen, in the Program/Service menu, and

when you press function keys.

Additional Team and Executive/Secretary Functions

Æ page 81f.

To help working and project groups work together more efficiently, the ser-

vice technician can configure a variety of team functions, depending on

your preferences when working in the team. You can use these team func-

tions in addition to the basic and enhanced functions.

In addition to call pickup, hunting groups (group call), and call distribution

groups, you can also set up teams with multiple lines per telephone.

You can tell if a telephone has trunk keys if your station number and the

numbers of your colleagues are programmed on trunk keys. You can ac-

cess all lines and can also conduct different calls simultaneously on multi-

ple lines.

Another team function category includes the executive/secretary

functions,which are configured by the service technician. You can use ex-

ecutive and secretary functions in addition to the basic and enhanced func-

tions as well as other team functions.

An executive/secretary telephone has DSS keys for the executive or sec-

retary, trunk keys for the executive and secretary, as well as ring transfer

keys.

Using the Telephone Efficiently

• You probably have certain colleagues or external parties with whom

you talk on the phone especially frequently. To dial these numbers fast-

er and more conveniently, you can save them on keys

(Saving station numbers for repertory dialing on keys Æ page 55).

• All too often you reach a busy line when dialing a number. Amid the

confusion of your working day, it’s easy to forget to try the number

again later on. To avoid this, make it a habit to use the "Callback"

Æ page 47 function.

Basic and Enhanced Functions

Step by Step

Making and Answering Calls

14

Making and Answering Calls

Special default ring signaling is set for your telephone:

• When you receive an internal call, your telephone

rings once every four seconds (single-tone

sequence).

• When you receive an external call, your telephone

rings twice in rapid succession every four seconds

(dual-tone sequence).

• When you receive a call from the entrance tele-

phone, your telephone rings three times in rapid

succession every four seconds (triple-tone se-

quence).

• If a call is waiting, you hear a short tone (beep) every

six seconds.

The number or the name of the caller appears on the

display.

Answering a Call With the Handset

The telephone rings. The caller appears on the screen.

C

Lift the handset.

J

or

K

Raise or lower the volume. Keep pressing the key until

the desired volume is set.

Ending the call:

I

Replace the handset.

or

Press the key.

Answering a Call with the Speaker

(Speakerphone Mode)

The telephone rings. The caller appears on the screen.

Press the key. The LED lights up.

Speakerphone mode.

J

or

K

Raise or lower the volume. Keep pressing the key until

the desired volume is set.

Release

This function is not available with

optiPoint 500 economy and optiPoint 500 basic.

Speaker

Making and Answering Calls

15

Step by Step

Ending the call:

Press the key. The LED goes out.

or

Press the key.

Notes on speakerphone mode:

• Tell the other party that you are using speakerphone

mode.

• The speakerphone works bests at a low receiving

volume.

• The ideal distance between the user and the tele-

phone set in speakerphone mode is about 50 cm

(approx. 20 inches).

Open Listening in the Room During a Call

You can let other people in the room join in on the call.

Let the other party know that you have turned on the

speaker.

Precondition: You are conducting a call with the hand-

set.

Activating ring transfer:

Press the key. The LED lights up.

Deactivating this function:

Press the key. The LED goes out.

Speaker

Release

Speaker

Step by Step

Making and Answering Calls

16

Switching to Speakerphone Mode

Precondition: You are conducting a call with the hand-

set.

and

I

Hold down the key and replace the handset.

(in the U.S.: press the key once and replace the hand-

set). Then release the key and continue the call.

Switching to the Handset

Precondition: You are engaged in a call in speaker-

phone mode.

C

and

H

Lift the handset. Continue the call.

Using Call Waiting

Callers can still reach you while you are engaged in an-

other call. A signal alerts you to the waiting call.

You can either ignore or accept the waiting call.

When you accept the waiting call, you can either end

the first call or place it on hold and resume the call later

on.

You can also bar call waiting or the call waiting tone

Æ page 17.

Accepting a Waiting Call (Camp-On)

Precondition: You are engaged in a phone call and hear

a tone (every six seconds).

Ending the first call and answering the waiting call:

I Replace the handset. Your telephone rings.

C Answer the second call. Lift the handset.

Placing the first call on hold and answering the sec-

ond call:

Select and confirm.

This function is not available with

optiPoint 500 economy and optiPoint 500 basic.

Speaker

This function is not available with

optiPoint 500 economy and optiPoint 500 basic.

Call waiting?

Making and Answering Calls

17

Step by Step

or

Press the key. The LED lights up. Enter the code.

F>>

You are connected to the call waiting party immediately.

The first party is placed on hold.

Ending the second call and resuming the first one:

Confirm.

or

F9

Press the key. The LED lights up. Enter the code.

or

I

C

Replace the handset. "Recall: ..." appears on the screen.

Lift the handset.

Preventing and Allowing Call Waiting

(Automatic Camp-On)

If this function has been configured (ask your service

technician), you can prevent or allow a second call

Æ page 16 from being signaled by automatic camp-on

during an ongoing call.

Press the key. The LED lights up

and

Select and confirm.

or

G=B9 or F=B9 Enter the code for "off" or "on".

Turning the Call Waiting Tone On and Off

You can suppress the call waiting tone (every six sec-

onds) for external calls. A one-time special dial tone

then alerts you to the waiting call.

Select and confirm.

or

FA@ or GA@ Enter code for "tone off" or "tone on".

Program/Service

Quit and return?

Program/Service

#490=Call wait.trm.off?

*

490=Call wait.term.on?

Waiting tone off?

Waiting tone on?

Step by Step

Making and Answering Calls

18

Accepting a Specific Call for Your

Colleague

You hear another telephone ring.

Press the key. The LED lights up

Select and confirm.

or

F>B

Enter the code.

A called station appears on the screen.

If applicable

Select and confirm until you see the station you want.

Confirm.

or

D

If you know the number of the telephone that is ringing,

enter it directly.

or

Press the flashing key.

Rejecting Calls

You can reject calls which you do not wish to take. The

call is then signaled at another definable telephone

(contact your service personnel).

The telephone rings. The caller is displayed.

Press the key.

If a call cannot be rejected, your telephone will continue

to ring. The message "currently not possible" (UK) or

"Feature not available" (US) is displayed (e.g in the case

of recalls).

Program/Service

*

59=Pickup - directed?

Next?

Accept call?

Accepting calls in a team Æ page 90.

Release

Making and Answering Calls

19

Step by Step

Using Mailboxes

If you have programmed the "Mailbox" key Æ page 57,

the associated LED lights up when messages have ar-

rived for you. If your telephone is connected to a voice

mail system, the "Mailbox" key will also light up to alert

you to any messages that have arrived.

Accessing the Mailbox

Press the illuminated "Mailbox" key.

or

Confirm.

Select and confirm.

or

Follow the user prompts.

Using Timed Reminders

Precondition: You must have saved a timed reminder

Æ page 62. The current time is the time stored.

The telephone rings. The timed reminder appears on

the screen.

Press the key twice.

or

C

I

Lift the handset and replace it again.

US: View messages?

UK: Display Messages?

US: Message sent?

UK: Text?

US: Call voice mail?

UK: Call Voice Mail?

US: Reminder:

UK: Reminder at:

Speaker

If you fail to answer the timed reminder, it re-

peats five times and is then erased.

Step by Step

Making and Answering Calls

20

Using the Speakerphone

A colleague addresses you directly over the speaker

with a speaker call. You hear a tone before the an-

nouncement. The other party’s name or station number

appears on the screen.

You can conduct the call with the handset or in speaker-

phone mode.

C

Lift the handset and answer the call.

or

Press the "OK" key to confirm your selection and answer

the call.

or

Press the key and answer the call.

Enabling and Disabling Handsfree

Answerback

Select and confirm.

or

FB? or GB? Enter the code for "on" or "off".

Answering a Call With a Headset

Your telephone rings. Confirm.

Ending the call:

Press the key. The LED goes out.

Speakerphone mode is not available with

optiPoint 500 economy and optiPoint 500 basic.

Mute off?

Mute

If handsfree answerback is enabled (see below),

you do not need to switch on the microphone -

you can answer directly. You can answer immedi-

ately in speakerphone mode.

If handsfree answerback is disabled (default set-

ting), follow the procedure described above.

Placing a speaker call to a colleague Æ page 28.

HF answerback on?

HF answerback off?

Answer?

Release

Page is loading ...

Siemens optiPoint 500 economy Owner's manual

This manual is also suitable for

Siemens optiPoint 500 economy Owner's manual

Related papers

Other documents