INSTRUCTION MANUAL
10307
10309L
Rechargeable
LED Aluminium
Flashlight
2
CONTENTS
Warranty
For full details please visit us at www.909.com
Warranty 2
Introduction 3
Environmental protection 3
Specifications 3
General safety warnings and instructions 4
Important safety instructions 4
Additional safety instructions for the charger 5
Know your product 6
Introduction 7
Charging/recharging the flashlight 7
Care and maintenance 7
Battery replacement/disposal 7
Troubleshooting 8
Accessories 8
3
Specifications
Light: 20 LED
Model 10301 battery: 3.6V Ni-MH
rechargeable battery cells 1.2 Ah
Model 10309L battery: 3.6V Lithium-Ion
rechargeable cells 2.0 Ah
240Vac plug
pack charger: Input: 240V Ac 50HZ 5W
Output: 6Vdc 300mA
Introduction
Your new 909 appliance will more than satisfy
your expectations. It has been manufactured under
stringent 909 Quality Standards to meet superior
performance criteria.
You will find your new appliance easy and safe to operate,
and, with proper care, it will give you many years
of dependable service.
CAUTION. Carefully read through this entire Instruction
Manual before using your new 909 appliance. Take
special care to heed the Cautions and Warnings.
Your 909 appliance has many features that will make your
job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Environmental protection
Recycle unwanted materials instead
of disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling centre and
disposed of in an environmentally safe way
.
4
General safety warnings and instructions
Read all instructions
WARNING: Read all instructions before operating light.
Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure that they do
not play with the appliance.
Safety guidelines / definitions
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates
potentially hazardous situation which, if not avoided, may
result in property damage.
Risk of unsafe operation.
When using tools or equipment, basic safety precautions
should always be followed to reduce the risk of personal
injury. Improper operation, maintenance or modification
of tools or equipment could result in serious injury and
property damage. There are certain applications for
which tools and equipment are designed. Manufacturer
strongly recommends that this product NOT be modified
and/or used for any application other than for which it was
designed. Read and understand all warnings and operating
instructions before using any tool or equipment.
Important safety instructions
Instructions pertaining to risk of fire, electric shock,
or injury to persons
WARNING – When using electrical appliances, basic
precautions should always be followed, including the
following:
• To reduce the risk of injury, close supervision is
necessary when the light is used near children.
• Use only attachments recommended or sold by the
manufacturer.
WARNING: To reduce the risk of electric shock:
• Do not put light in water or other liquid. Do not place
or store appliance where it can fall or be pulled into a
tub or sink.
• Charge (and use in corded mode) indoors only. Do not
expose charger to water or any other liquid.
• Keep light lamp away from materials that may burn.• Do
not clean this appliance with a water spray or the like.
• When an extension cord is used:
– The marked rating of the detachable power supply
cord or extension cord should be at least as great as the
electrical rating of this appliance.
– The cord should be arranged so that it will not drape
over the countertop or tabletop where it can be tripped
over, snagged, or pulled on unintentionally (especially by
children).
– The extension cord should be kept dry and off the ground.
5
Additional safety instructions for the charger
• Before using the charger, read all the instructions and
cautionary markings on the charger and torch.
• Only charge your torch indoors as the charger is
designed for indoor use only.
• WARNING. Do not allow any liquid to come into contact
with the charger. There is a danger of electric shock.
• The charger is not intended for any use other than
charging the exact type of rechargeable torch as supplied
with the charger. Any other use may result in the risk of
fire, electric shock or electrocution.
• The charger and torch are specifically designed to work
together. Do not attempt to charge the torch with any
other charger than the one supplied.
• Do not place any object on top of the charger as it could
cause overheating. Do not place the charger near any
heat source.
• Do not pull on the lead of the charger to disconnect it
from the power source.
• Make sure that the charger cable is positioned where
it will not be stepped on, tripped over or otherwise
subjected to damage or stress.
• Do not use an extension cord unless it is absolutely
necessary. The use of an improper extension cord could
cause the risk of fire, electric shock or electrocution.
• Do not use the charger if it has been subjected to a
heavy knock, dropped or otherwise damaged in any way.
Take the charger to a power tool repair centre for a check
or repair.
• Do not disassemble the charger. Take it to power tool
repair centre when service or repair is required. Incorrect
re-assembly may result in the risk of fire, electric shock or
electrocution.
• The charger is designed for use from a standard
household electrical supply (230–240 volts). Do not
attempt to connect the charger to a supply with a
different supply.
CAUTION: To reduce the risk of injury or property
damage:
• Do not operate this unit with a missing or damaged bright
bar light tube.
• Do not touch the LED Tower light tube at any time.
• Never look directly into the light or shine the light into
another person’s eyes.
• Do not immerse light in water.
• Do not expose this unit to extremely high temperatures,
flames or sparks.
• Do not drop or throw light. It contains glass and a nickel
metal hydride or lithium-ion rechargeable battery pack.
• Use only with AC charging adapter provided with this unit.
Plug in the charging adapter at the light first, then plug
into the charging source.
• After charging/recharging, disconnect charging adapter or
extension cord and wait 5 minutes before use.
• Do not crush, cut, pull or expose charging adapter cords
to extreme heat.
• Position charging adapter cords so they do not become
entangled or become a safety hazard. Keep charging
adapter cords away from sharp edges.
• Use in a dry location only.
• Do not open body casing. There are no user-serviceable
parts inside.
• Do not operate the light without the lens in place.
• To reduce risk of damage to electric plug and cord, pull
by plug rather than cord when disconnecting.
• Do not attempt to charge the unit if the charger is
damaged – return the charger to manufacturer for repair
or replacement.
• DO NOT OVERCHARGE: Charge up to 8 hours
maximum.
Save these instructions
6
Know your product
1. Push button switch
2. Aluminium housing
3. Super bright LED
4. 6V DC Charging port
5. Charging stand adaptor
6. Charging indicator light
7. 240V AC Plug pack charger
7
1
2
3
5
4
6
7
Introduction
Congratulations on purchasing your new 909 Aluminium
LED rechargeable Flashlight.
Ensure to read this instruction manual and follow the
instructions carefully prior to using the product.
Fitting and removing the flashlight
from the charging stand adaptor
• To fit the flashlight, insert the lower end of the handle
flashlight into the round recess in the bottom of the
charging stand. The flashlight will be on an angle. When
inserted, push the body of the flashlight into the two
upper wings of the charging stand adaptor. These wings
are spring loaded and will allow the flashlight to fully enter
and locate in the housing.
• To remove the flashlight, pull the upper section of the
flashlight outward. The wings will release the flashlight.
Then lift the flashlight out of the lower recess.
Charging / recharging the flashlight
This flashlight is shipped in a partially charged state and will
require charging.
Charge the Lithium-Ion model No 10309L for approx 6-8
hours, or the NiMH model No 10307 for approx 5-7 hours.
• Ensure the flashlight is turned off
• Fit the flashlight into the charging stand adaptor, ensuring
the flashlight fully clips into place.
• Connect the plug of the plug pack charger into the
charging port of the charging stand.
• Connect the plug pack charger into a house hold 240Vac
power point and turn on.
• Check the charging indicator on the charging stand
adaptor. The indicator should be glowing red, indicating
the charging process is underway.
• When the flashlight is fully charged the Red indicator will
change to Green.
• Turn Off the 240Vac plug pack adaptor and remove the
plug pack from the power point.
To turn the flashlight On and Off
• To turn the flashlight ON, press the “push button switch”.
• To turn the flashlight Off, press again the “push button
switch”.
Care and maintenance
All batteries lose energy from self-discharge over time and
more rapidly at higher temperatures. When the unit is not
in use, we recommend that the battery is charged at least
every 120 days.
Never submerge the unit in water. If the unit gets dirty,
gently clean the outer surfaces of the spotlight unit with
a soft cloth moistened with a mild solution of water and
detergent.
There are no user-replaceable parts. Periodically inspect the
condition of the charger. Contact manufacturer to replace
any components that have become worn or broken.
Battery replacement/disposal
Battery replacement
The battery should last the service life of the unit. Contact
manufacturer for any information you may need.
Safe battery disposal
This unit contains a nickel metal hydride or Lithium-Ion
rechargeable battery pack, which must be must be disposed
of properly when it will no longer retain a charge.
• Do not dispose of the battery in fire as this may result in
an explosion.
• Before disposing of the battery, protect exposed terminals
with heavy-duty electrical tape to prevent shorting
(shorting can result in injury or fire).
• Do not expose battery to fire or intense heat as it may
explode.
8
Troubleshooting
Unit will not charge
1. Check connection to the 6 volt DC charging port.
2. Check connection to AC power source. Ensure power
point is turned on
3. Confirm there is a functioning AC current.
Unit will not operate
1. The battery may be completely discharged. Charge the
unit following the directions.
2. If the light does not operate after recharging as directed,
contact manufacturer.
Accessories
Recommended accessories for use with your tool are
available from your local dealer or authorized service centre.
If you need assistance regarding accessories, please
contact manufacturer.
WARNING: The use of any accessory not recommended for
use with this appliance could be hazardous.
9
10
11
/
