4. Use a paper towel and wipe off grease
from the evaporator coils.
5. Apply thermal mastic to the coils.
IMPORTANT!
To achieve freezer and refrigerator temperature performance it is ex-
tremely important that thermal mastic is applied to the evaporator coils!
Thermal mastic is a heat transfer compound applied to the evaporator coils of the
cooling unit at points where they make metal to metal contact with the freezer plate
and ns of the refrigerator. Thermal mastic greatly enhances the cooling ability of
the cooling unit, and failure to use it will result in poor cooling and give the false im-
pression that the new unit is defective.
INSTRUCTION
1. Open box and locate the thermal mastic
tube.
2. Using a knife, cut off the tip of the tube.
Cut at the 5/16 measuring mark.
3. Place tube in skeleton gun.
THERMAL
MASTIC
W = 0.79”
T = 0.16”
825128800 REVISION A MO-M 0749
/
