SEC-UTS11
Video transceiver for CCTV camera
Specifications:
Input: 4x BNC
Output: RJ45, terminal connector
Video input level: 1V p-p, 75Ohm
Output cable: Twisted Pair CAT5 AWG24 (UTP, FTP,
best result: STP)
Transmission range: 300m Colour, 500m B/W
Power: not required
1x Twisted
pair cable
4x OUT
4x IN
DVR
Warranty:
No guarantee or liability can be accepted for any
changes and modifications of the product or damage
caused due to incorrect use of this product.
General:
Designs and specifications are subject to change
without notice.
Safety precautions:
Do not expose the product to water or moisture.
General:
Designs and specifications are subject to change
without notice.
Attention:
This product is marked with this symbol. It
means that used electrical and electronic
products should not be mixed with general
household waste. There is a separate
collections system for these products.
Copyright ©
/