KRAM 68740 Datasheet

KRAM
Brand
KRAM
Model
68740
Category
Cable interface/gender adapters
Type
Datasheet

KRAM 68740

The KRAM 68740 is an interface lead designed to enable the use of car speakers when answering or making calls from a cell phone. It is compatible with car stereos that have a Line-In function or VDA preparation.

The KRAM 68740 is easy to install. Simply connect the VDA cable to the VDA connector in your car, which is usually located behind the passenger side kick panel, behind the glove compartment, or behind the climate control panel. Then, connect the other end of the cable to the carkit-specific interface adaptor cable, which is then connected to the carkit.

KRAM 68740

The KRAM 68740 is an interface lead designed to enable the use of car speakers when answering or making calls from a cell phone. It is compatible with car stereos that have a Line-In function or VDA preparation.

The KRAM 68740 is easy to install. Simply connect the VDA cable to the VDA connector in your car, which is usually located behind the passenger side kick panel, behind the glove compartment, or behind the climate control panel. Then, connect the other end of the cable to the carkit-specific interface adaptor cable, which is then connected to the carkit.

Made in Denmark by
Kram Telecom A/S
Interface Leads
Instruction for
VDA cable 68740 for
Saab / Opel / Vauxhall
Interface Leads
Made in Denmark by
Kram Telecom A/S
EN740
Installation description
VDA cable 68740 for
Saab / Opel / Vauxhall
Connect the VDA cable to the VDA connector. The VDA connector is
normally found behind the passenger side kick panel (LHD), behind
glove compartment or climacontrol panel. Connect the other end
through a carkitspecific interface adaptor to the carkit.
SAAB 9.3 normally has the VDA
plug placed behind the passen-
ger kick panel on the center
consol. The plug is wrapped in
tape.
SAAB 9.5 normally has the VDA
plug placed behind the Heater
control panel. The plug is
wrapped in tape and is taped
together with other cables and
can therefore be hard to spot.
After the installation you must adjust the phone volume to its mid-
dle position and then adjust the conversation sound level accord-
ing to the description in the radio manual.
When the VDA cable is installed it will redirect your call through
the cars front speaker.
Please remember to use a carkit interface adaptor cable to connect
the carkit to the VDA cable.
Interface Leads Interface Leads
Product description
VDA cable 68740 for
Saab / Opel / Vauxhall
Interface Leads are used for car stereos with a Line-In func-
tion or VDA preparation. It enables the use of the car speakers
when answering/making calls from your cell phone. Thereby
using the radios build-in mute function.
Speaker-function: This is achieved by connecting the carkit di-
rectly to the cars Line-In input/VDA connector. By using the
radios built-in relays the telephone conversation is send
through the car speakers while the radio is muted. This way
you will achieve a perfect hands free sound without interfer-
ence from the car radio.
For a complete cable-set two item no. is required. The first is
a car-specific Interface Lead. The second is a carkit-specific In-
terface adaptor cable .
Power supply of the carkit: All Interface Leads are delivered
with a power connector for the carkit, that way you avoid cut-
ting the cars wiring loom.
Please check the radio instruction manual for special issues
regarding the connection and set-up of the radio, when con-
necting a carkit.
See our complete Interface program on
www.kram.dk
  • Page 1 1
  • Page 2 2

KRAM 68740 Datasheet

KRAM
Brand
KRAM
Model
68740
Category
Cable interface/gender adapters
Type
Datasheet

KRAM 68740

The KRAM 68740 is an interface lead designed to enable the use of car speakers when answering or making calls from a cell phone. It is compatible with car stereos that have a Line-In function or VDA preparation.

The KRAM 68740 is easy to install. Simply connect the VDA cable to the VDA connector in your car, which is usually located behind the passenger side kick panel, behind the glove compartment, or behind the climate control panel. Then, connect the other end of the cable to the carkit-specific interface adaptor cable, which is then connected to the carkit.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents