SECO-LARM USA EVT-AB1Q, EVT-RB1-4T2Q, EVT-TB1-42TQ, Receiver EVT-RB1-4T2Q User manual

  • Hello! I am an AI chatbot trained to assist you with the SECO-LARM USA EVT-AB1Q User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
EVT-AB1Q_Pdf.cdr
®
Features:
1.949.261.2999 (CA & Int’l) 1.800.662.0800 Fax: 1.949.261.7326
Email: [email protected] Website: www.seco-larm.com
16842 Millikan Avenue, Irvine, CA 92606
Typical Installation:
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Copyright 2008 SECO-LARM U.S.A., Inc. All rights reserved.
Active operation – The transmitter amplifies the video signal
for excellent picture quality at long distances.
Transmits video signal up to 1.5 miles (2.4km).
Uses low-cost CAT 5e unshielded twisted
pair (UTP) cable instead of costly coaxial cables.
Includes BNC connectors and removable terminal blocks –
No need to waste time crimping RJ-45 connectors.
High immunity from interference – Built-in
impedance coupled device and noise filter.
Easy installation.
300mA DC output on transmitter.
Includes 12VDC power adapters.
Gold-plated BNC connectors.
Surge protection. Ground lifting and transient protection.
EVT-TB1-42TQ
EVT-RB1-4T2Q
EVT-AB1Q
-- Transmitter
-- Receiver
-- Tx & Rx Set
The active (amplified) video balun transmits video signals of a
CCTV camera long distances over low-cost CAT 5e cable.
Suitable for full-motion color and monochrome cameras;
adjustable for maximum picture quality. A built-in data port
allows the transmission of PTZ signals.
Specifications:
Active Video Balun
Video, Data, Surge Protection
E
V
T-R
B
1-4
T2Q
R
e
ce
ive
r
EVT
-
TB1
-4
2
TQ
Transmitter
2.3"
(59
mm)
1.7" (43mm)
1
.
6
"
(41
mm
)
(Transmitter & Receiver
are the same size.)
Receiver
Shown
Features:
Dimensions:
ON DIP
1 2 3 4 5
Video Out
Video In
Data In
Data Out
Power In
12/24 VDC
Gain Adj.
Brightness
1
2
3
4
5
6
7
8
9
10
ON DIP
1 2 3 4 5
Video Out
Video In
Data In
Data Out
Power In
12/24 VDC
Gain Adj.
Brightness
1
2
3
4
5
6
7
8
9
10
ON DIP
1 2 3 4 5
Video Out
Video In
Data In
Data Out
Power In
12/24 VDC
Gain Adj.
Brightness
1
2
3
4
5
6
7
8
9
10
When using multiple
baluns, only a jumper
(included) is needed
to extend power &
data (max of 8 per
power adapter).
Interlocking Design
for cleaner & more
professional installs
Pigtail
EVA-F55213
DC Output
300mA max
12/24VDC
Up to 1.5 miles (2.4 km)
12/24VDC
Monitor
CAT 5e
ON DIP
1 2 3 4 5
Video Out
Video In
Data In
Data Out
Power In
12/24 VDC
Gain Adj.
Brightness
1
2
3
4
5
6
7
8
9
10
Multiplexor or DVR
Range Color 5,000’ (1524m)*
B/W 8,000’ (2438m)
Video format RS170, NTSC, PAL, SECAM, CCIR
Video input 1Vp-p, 75 ohms, BNC connector
Data RS422/RS485, 4-ports
Cable type CAT 2 or better (best if CAT 5e)
Blue LED Power on/off
Adjustments Tx - 3 positions
Rx - 5 dip switches (32 combinations)
Insertion loss < 2dB per pair from DC ~ 5Hz
Return loss >15dB from DC ~ 5MHz
Frequency response DC ~ 5MHz
Attenuation DC ~ 5Hz, 1.5dB max.
Common mode rejection 60dB
Power: 12/24 VDC, 12VDC adapter included
Power consumption: 40mA Tx, 60mA Rx @ 12VDC
Surge protection (video): Surge ratings IPP: 100 Amp at
10us x 1000us. Maximum Peak
Current: 250 Amp at 8us x 20us,
Transient Volt. Surge Suppressors
Temperature range: 7°~329° F (-14°~165° C)
Humidity range: 0~95%
Impedance: (BNC): 75W, (terminal): 100W
Case: ABS plastic
Weight: (without adaptors) Tx 3.4 oz. (95g), Rx 3.0 oz. (84g)
1
* Case alone is 2 /
8
" (54mm)
/