Sharp LLS201A Owner's manual

LL-S201A

LCD MONITOR

MONITEUR LCD

MONITOR LCD

LCD FARBMONITOR

SETUP MANUAL

MANUEL D’INSTALLATION

MANUAL DE INSTALACIÓN

INSTALLATIONSANLEITUNG

ENGLISH ...... E1

FRANÇAIS ..... F1

ESPAÑOL .... S1

DEUTSCH ..... D1

ENGLISH FRANÇAIS ESPAÑOLENGLISH FRANÇAIS ESPAÑOL DEUTSCH

Products that have earned the ENERGY STAR

®

are designed to protect the environment through superior

energy efciency.

Les produits labellisés ENERGY STAR

®

sont conçus pour protéger l’environnement par un rendement

énergétique supérieur.

Los Productos que han conseguido el ENERGY STAR

®

están diseñados para proteger el medio ambiente a

través de una mejor eciencia en el consumo de energía.

Mit dem ENERGY STAR

®

ausgezeichnete Produkte zeichnen sich durch ein besonders energiesparendes

Design aus und schützen die Umwelt.

NOTE FOR USERS IN U.K.

IMPORTANT

The wires in this mains lead are coloured in accordance with the following code:

BLUE: “NEUTRAL”

BROWN: “LIVE”

CONNECTING PLUG TO MAINS LEAD:

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the

terminals in your plugs, proceed as follows:

• The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.

• The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.

CAUTION:

Do not connect the Live (BROWN) wire or the neutral (BLUE) wire to the earth terminal of your 3 pin mains plug.

ENGLISH

1

E

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT

TO RAIN OR MOISTURE.

RISK OF ELECTRIC

SHOCK

DO NOT OPEN

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER.

NO USER-SERVICEABLE PARTS

INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The lightning ash with arrowhead symbol, within

a triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of

sufcient magnitude to constitute a risk of electric

shock to persons.

The exclamation point within a triangle is

intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

product.

Thank you for your purchase of a SHARP LCD product. To ensure safety and many years of trouble-free operation of your

product, please read the Safety Precautions carefully before using this product.

DEAR SHARP CUSTOMER

IMPORTANT INFORMATION

Contents

Read the manuals in the “Manual” folder of the provided CD-ROM. (Adobe Reader is required to view the manuals.)

[ENGLISH]

IMPORTANT INFORMATION ............................................1

DEAR SHARP CUSTOMER ..............................................1

SAFETY PRECAUTIONS ..................................................2

SAFETY INSTRUCTION ...................................................3

Supplied Components .....................................................4

Binding Cables .................................................................4

Connecting Peripheral Equipment .................................5

Connecting the monitor to a power source ..................6

Installation ........................................................................6

Turning Power ON/Off .....................................................8

Specications ..................................................................8

The volume is set to 0 when the monitor is shipped from the factory.

2

E

SAFETY PRECAUTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly

handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can

result in electric shock and/or re. In order to prevent potential danger, please observe the following instructions when installing,

operating and cleaning the product. To ensure your safety and prolong the service life of your LCD product, please read the

following precautions carefully before using the product.

1. Read instructions — All operating instructions must be read and understood before the product is operated.

2. Keep this manual in a safe place — These safety and operating instructions must be kept in a safe place for future

reference.

3. Observe warnings — All warnings on the product and in the instructions must be observed closely.

4. Follow instructions — All operating instructions must be followed.

5. Cleaning — Unplug the power cord from the AC outlet before cleaning the product. Use a dry cloth to clean the product. Do

not use liquid cleaners or aerosol cleaners.

6. Attachments — Do not use attachments not recommended by the manufacturer. Use of inadequate attachments can result

in accidents.

7. Water and moisture — Do not use the product near water. Do not install the product in a place where water may splash onto

it. Be careful of equipment which drains water such as an air-conditioner.

8. Ventilation — The vents and other openings in the cabinet are designed for ventilation.

Do not cover or block these vents and openings since insufcient ventilation can cause overheating and/or shorten the life

of the product. Do not place the product on a sofa, rug or other similar surface, since they can block ventilation openings.

Do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the

manufacturer’s instructions are followed.

9. Power cord protection — The power cords must be routed properly to prevent people from stepping on them or objects from

resting on them.

10. The screen used in this product is made of glass. Therefore, it can break when the product is dropped or applied with

impact. Be careful not to be injured by broken glass pieces in case the screen breaks.

11. Overloading — Do not overload AC outlets or extension cords. Overloading can cause re or electric shock.

12. Entering of objects and liquids — Never insert an object into the product through vents or openings. High voltage ows in

the product, and inserting an object can cause electric shock and/or short internal parts.

For the same reason, do not spill water or liquid on the product.

13. Servicing — Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other

dangerous conditions. Request a qualied service person to perform servicing.

14. Repair — If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualied service

person to perform repairs.

a. When the power cord or plug is damaged.

b. When a liquid was spilled on the product or when objects have fallen into the product.

c. When the product has been exposed to rain or water.

d. When the product does not operate properly as described in the operating instructions.

Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls

not described in the instructions can cause damage, which often requires extensive adjustment work by a qualied

technician.

e. When the product has been dropped or damaged.

f. When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the product

needs servicing.

15. Replacement parts — In case the product needs replacement parts, make sure that the service person uses replacement

parts specied by the manufacturer, or those with the same characteristics and performance as the original parts. Use of

unauthorized parts can result in re, electric shock and/or other danger.

16. Safety checks — Upon completion of service or repair work, request the service technician to perform safety checks to

ensure that the product is in proper operating condition.

17. Wall mounting — When mounting the product on a wall, be sure to install the product according to the method

recommended by the manufacturer.

18. Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating

products (including ampliers).

19. Usage of the monitor must not be accompanied by fatal risks or dangers that, could lead directly to death, personal injury,

severe physical damage or other loss, including nuclear reaction control in nuclear facility, medical life support system, and

missile launch control in a weapon system.

20. Do not touch the parts of the product or the AC adapter that become hot for long periods of time. Doing so may result in

low-temperature burns.

To maintain compliance with EMC regulations, use shielded cables to connect to the following terminals: HDMI input terminal

and DisplayPort input terminal.

This product is designed for commercial application only and as such it falls outside the scope of Regulation (EC) 1275/2008

implementing EU Directive 2005/32/EC on eco-design requirements for standby and off mode electric power consumption.

SHARP do not recommend the product for domestic application and will not accept any liability for such use.

ENGLISH

3

E

- Do not use the monitor where there is a lot of dust, where

humidity is high, or where the monitor may come into contact

with oil or steam, as this could lead to re.

- Ensure that the monitor does not come into contact with

water or other uids. Ensure that no objects such as paper

clips or pins enter the monitor as this could lead to re or

electric shock.

- Do not place the monitor on top of unstable objects or in

unsafe places. Do not allow the monitor to receive strong

shocks or to strongly vibrate. Causing the monitor to fall or

topple over may damage it.

- Continuous Operation Time and Warranty

This product has been designed based on the assumption

of 15 or fewer hours of usage in one day. Continuous usage

that exceeds 15 hours in one day is not covered by the

warranty.

- Do not use the monitor near heating equipment or in places

where there is likelihood of high temperature, as this may

lead to generation of excessive heat and outbreak of re.

- Do not use the monitor in places where it may be exposed to

direct sunlight.

- The AC outlet shall be installed near the equipment and shall

be easily accessible.

- Do not operate the screen with a hard or pointed object such

as a ngernail, pen other than the included touch pen, or a

sharp pencil.

SAFETY INSTRUCTION

The Power Cord and AC adapter

- Use only the power cord and AC adapter supplied with the

monitor.

- When handling the AC adapter, observe the following:

Incorrect handling may result in re, electric shock, or injury.

• Do not drop the AC adapter or subject it to impact.

• Never disassemble the AC adapter. It contains high voltage

parts that are dangerous to touch.

• The AC adapter is for indoor use only. Do not use it outside.

• Do not use the supplied AC adapter with other devices.

- Do not damage the power cord and AC adapter nor place

heavy objects on it, stretch it or over bend it. Also, do not

add extension cords. Damage to the cord may result in re

or electric shock.

- Do not use the power cord with a power tap.

Adding an extension cord may lead to re as a result of

overheating.

- Do not remove or insert the power plug with wet hands.

Doing so could result in electric shock.

- Unplug the power cord if it is not used for a long time.

- Do not attempt to repair the power cord if it is broken

or malfunctioning. Refer the servicing to the service

representative.

- Do not stay in contact with the parts of the product and the

AC adapter that become hot for long periods of time.

Doing so may result in low-temperature burns.

- For your health, observe the following:

• If using the monitor continuously, take a 10- to 15-minute

break every hour to rest your eyes.

• Do not use the monitor in high-contrast light conditions.

• Do not use the monitor in locations where the screen is

subject to direct sunlight.

If a monitor is not positioned in a sufciently stable location, it can be potentially hazardous due to falling. Many injuries,

particularly to children, can be avoided by taking simple precautions such as:

• Using xing devices like wall mount brackets recommended by the manufacturer.

• Only using furniture that can safely support the monitor.

• Ensuring the monitor is not overhanging the edge of the supporting furniture.

• Not placing the monitor on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the

monitor to a suitable support.

• Not standing the monitors on cloth or other materials placed between the monitor and supporting furniture.

• Educating children about the dangers of climbing on furniture to reach the monitor or its controls.

SAFETY PRECAUTIONS (Continued)

4

E

Supplied Components

Binding Cables

If any component should be missing, please contact your dealer.



Liquid Crystal Display Monitor: 1



Power cord



CD-ROM (Utility Disk): 1



Setup Manual (this manual): 1



Touch pen: 1

* SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.

* Keep packaging for use when transporting monitor, etc.



AC adapter: 1



USB cable (USB-microUSB Type B): 1



Stand (front, back, bottom cover, Fixing screws: 2): 1

Secure the HDMI cable, DisplayPort cable, and USB cable using the cable clamp.

1. Remove the cable clamp.

Cable clamp

2. Route the cables through the cable

restraint slot.

Cable restraint

slot

3. Push the cable clamp down into place.

Cable clamp

Caution

• When connecting cables, spread a soft cloth on a stable level surface such as a desk, and gently place the monitor on it with

the screen facing down.

ENGLISH

5

E

Caution

• Be sure to turn off the power and disconnect the plug from

the power outlet before connecting/disconnecting cables.

Also, read the manual of the equipment to be connected.

• Do not forcibly bend or apply force to cables. Doing so may

result in wire breakage or other damage.

• When connecting cables, spread a soft cloth on a stable

level surface such as a desk, and gently place the monitor

on it with the screen facing down.

• Do not use any cable that has a damaged or deformed

terminal. Using such cables may cause malfunctions.

TIPS

• Images may not be displayed properly depending on the

computer (video card) to be connected.

Connection with a PC

Connect the monitor and a PC using the connection cable.

n

Inputting video and audio

HDMI input terminal

Commercially available HDMI cable

(conforming to the HDMI standard)

To HDMI output

terminal on PC

Check the orientation of the connector and insert it horizontally

as far as it will go.

• It is possible to connect the monitor’s HDMI input terminal

to a smartphone or similar MHL-compliant device using a

commercially available MHL cable.

This production incorporates MHL 1.

DisplayPort input terminal

Commercially available DisplayPort cable

To DisplayPort output

terminal on PC

Check the orientation of the connector and insert it horizontally

as far as it will go.

TIPS

• The length of the signal cables or surrounding environment

may affect the image quality.

• The video from the terminal that has signal input is

displayed. In this state, even if a signal is input from the

other terminal, the display is not switched. To switch the

display, use [Input Select] on the menu screen.

• If the LCD monitor is turned on when there are input signals

from both terminals, the video from the DisplayPort input

terminal is displayed.

• The terms HDMI and HDMI High-Denition Multimedia

Interface, and the HDMI Logo are trademarks or registered

trademarks of HDMI Licensing LLC in the United States

and other countries.

• DisplayPort is a registered trademark of Video Electronics

Standards Association.

• MHL, the MHL logo, and Mobile High-Denition Link are

trademarks or registered trademarks of MHL, LLC in the

United States and other countries.

n

Using the touch panel

To use the touch panel, connect the monitor to a USB port on

a PC using the supplied USB cable.

Micro-USB terminal

Supplied USB cable

To USB port on PC

Check the orientation of the connector and insert it horizontally

as far as it will go.

Connecting headphones

(commercially available)

Headphones (commercially available) with a stereo mini plug

(φ 3.5 mm) can be connected to the monitor.

Headphone jack

φ 3.5 mm stereo mini plug of commercially

available headphones

TIPS

• When headphones are connected it will no longer be

possible to hear sound from the monitor’s speakers.

• Volume can be adjusted using [Volume] on the menu

screen.

• The volume is set to 0 when the monitor is shipped from

the factory.

Connecting Peripheral Equipment

6

E

Connecting the monitor to a power source

Installation

Caution

• Use only the AC adapter and power cord supplied with the monitor.

1. Connect the monitor to the power outlet using the supplied AC adapter and power cord.

AC adapter core

Core restrainer

Back of monitor

AC adapter

connection terminal

Power cord

(Supplied)

AC adapter (Supplied)

For power

outlet

2. Push the AC adapter core into the core restrainer

The monitor can be installed in three different ways.

Standing position

Place the monitor on the supplied stand.

Caution

• The stand is for use in landscape orientation. It cannot be

used for portrait orientation.

n

Assembling the stand

1. Insert the back into the front.

Align the mark (



) on the front with the edge of the back

and insert the back from above.

Front

Back

Front

2. Slide the back across.

Slide the back until it clicks into place.

Back

3. Attach the bottom cover.

Align the arrow on the bottom cover so that it points toward

the front, and press the projections on the bottom cover

into the pocket on the front and back.

Front

Front pocket

Projection

Arrow

Back

Back pocket

Bottom cover

ENGLISH

7

E

n

Mounting the monitor on the stand

1. Place the stand on a level surface.

2. Set the monitor on the stand.

Set the monitor so that the logo in the center is aligned with

the circle mark on the stand.

Logo

Circle mark

TIPS

• The stand and the monitor can be secured with xing

screws.

Fixing screws (supplied)

Pen writing position

Place the monitor at an angle on a table or other level surface.

1. Holdtheapbythedepressiononthebackofthe

monitorandpulltheapup.

Depression

2. Place the monitor where you want to use it.

Caution

• Do not exert a large amount of force on the monitor from

above. Doing so may damage the ap.

Horizontal position

Place the monitor on a table or other level surface.

Caution

• When using the monitor horizontally, use the horizontal tab

in the upright position.

1. Lift up the two tabs on the back of the monitor.

2. Place the monitor where you want to use it.

Caution

• Do not exert a large amount of force on the monitor from

above. Doing so may damage the tabs.

8

E

Turning Power ON/Off

Turning on the power

1. Press the POWER button.

Power LED

Press

POWER button

The power LED turns on.

2. Turn on the PC.

The screen appears.

Status Status of the monitor

Green lit Signal input

Orange lit No signal input

Turning off the power

1. Turn off the PC.

2. Depress the POWER button for around 2 seconds.

Depress for around

2 seconds

POWER button

The power LED turns off.

Caution

• If the monitor will not be used for a long time, disconnect

the power plug from the power outlet.

Specications

Model LL-S201A

Power requirement AC 100 V - 240 V, 50/60 Hz (when using the supplied AC adapter)

Operating temperature 32°F to 95°F (0°C to 35°C)

Operating humidity 20% to 80% (no condensation)

Power consumption 35 W

Dimensions (excluding protrusions) inch (mm)

Approx. 18-1/4 (W) x 1 (D) x 10-13/16 (H) (463.8 x 25.2 x 274.8)

Weight lbs. (kg)

Approx. 5.07 (2.3) (excluding the stand)

Approx. 6.39 (2.9) (including the stand)

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specication changes for product improvement

without prior notice. The performance specication gures indicated are nominal values of production units. There may be some deviations from

these values in individual units.

n

Operation mode

When the monitor is turned on for the rst time after being shipped from the factory, the operation mode setting screen will be

displayed. Set it to MODE1 or MODE2.

MODE1 ....If there is no operation for 4 hours or more, the monitor automatically enters standby mode. Power consumption in

standby mode is also minimized.

MODE2 ....Will perform standard operation.

Even after being set, changes can be made using [Operation mode], located in the menu of the monitor. (See OPERATION

MANUAL.)

Page is loading ...

Printed in China

Imprimé en China

Impreso en Chine

Gedruckt in China

13A YT1

TINSM1309MPZZ(1)

ERRATA SHEET

ENGLISH

Error Correction

Page 8

n

Operation mode

When the monitor is turned on for the rst time after being shipped

from the factory, the operation mode setting screen will be displayed.

Set it to MODE1 or MODE2.

MODE1 ......If there is no operation for 4 hours or more, the monitor

automatically enters standby mode. Power consumption

in standby mode is also minimized.

MODE2 ......Will perform standard operation.

Even after being set, changes can be made using [Operation mode],

located in the menu of the monitor. (See OPERATION MANUAL.)

n

Operation Mode

When the monitor is turned on for the rst time after being shipped

from the factory, the operation mode setting screen will be displayed.

Set it to Mode1 or Mode2.

Mode1........If there is no operation for 4 hours or more, the monitor

automatically turns off the power.

Mode2........Will perform standard operation.

Even after being set, changes can be made using [Operation Mode],

located in the menu of the monitor. (See OPERATION MANUAL.)

(LL-S201A)

LISTE DES ERRATA

FRANÇAIS

Erreur Correction

Page 8

n

Mode de fonctionnement

Lorsque vous allumez votre moniteur pour la première fois, l’écran

de réglage du mode de fonctionnement s’afche. Réglez le mode de

fonctionnement sur MODE1 ou MODE2.

MODE1 .....Si aucune action n’est accomplie pendant au moins 4

heures, le moniteur se met automatiquement en mode

veille. Le mode veille permet de réduire la consommation

d’énergie.

MODE2 .....Permet d’utiliser les fonctions standards.

Après chaque réglage, il est possible d’effectuer des changements à

partir de [Operation mode] <MODE DE FONCTIONNEMENT>, situé

dans le menu du moniteur. (Voir le MODE D’MPLOI.)

n

Mode de Fonctionnement

Lorsque vous allumez votre moniteur pour la première fois, l’écran

de réglage du mode de fonctionnement s’afche. Réglez le mode de

fonctionnement sur [Mode1] ou [Mode2].

[Mode1].......Si aucune action n’est accomplie pendant au moins 4

heures, le moniteur s'éteint automatiquement.

[Mode2].......Permet d’utiliser les fonctions standards.

Après chaque réglage, il est possible d’effectuer des changements à

partir de [Operation Mode] <Mode de Fonctionnement>, situé dans le

menu du moniteur. (Voir le MODE D’MPLOI.)

FE DE ERRATAS

ESPAÑOL

Error Corrección

Página 8

n

Modo operativo

Cuando se encienda el monitor por vez primera tras su envío de

fábrica, aparecerá la pantalla de ajuste del modo operativo.

Establezca en MODE1 <MODO1> o MODE2 <MODO2>.

MODE1 <MODO1>

........................................ Si no se realiza ninguna operación

durante 4 horas o más, el monitor pasará

automáticamente al modo en espera.

El consumo de energía también reduce al

mínimo en el modo en espera.

MODE2 <MODO2> ........ Permitirá la utilización estándar.

Incluso después de haberse establecido, podrán realizarse cambios

con [Operation mode] <MODO DE OPERACIÓN>, dentro del menú

del monitor. (Véase el MANUAL DE INSTRUCCIONES.)

n

Modo de Operación

Cuando se encienda el monitor por vez primera tras su envío

de fábrica, aparecerá la pantalla de ajuste del modo operativo.

Establezca en [Mode1] <Modo1> o [Mode2] <Modo2>.

[Mode1] <Modo1>

........Si no se realiza ninguna operación durante 4 horas o más, el

monitor se apagará automáticamente.

[Mode2] <Modo2>

........Permitirá la utilización estándar.

Incluso después de haberse establecido, podrán realizarse

cambios con [Operation Mode] <Modo de Operación>,

dentro del menú del monitor. (Véase el MANUAL DE

INSTRUCCIONES.)

FEHLERBLATT

DEUTSCH

Fehler Korrektur

Seite 8

n

Betriebsmodus

Wenn der Monitor zum ersten Mal in Betrieb genommen wird,

erscheint das Betriebsmodus-Einstellfenster. Wählen Sie hier MODE1

<MODUS1> oder MODE2 <MODUS2> aus.

MODE1 <MODUS1> .......... Erfolgt mindestens 4 Stunden lang keine

Befehlseingabe, wechselt der Monitor

automatisch in den Standby-Modus. Der

Stromverbrauch wird im Standby-Modus

minimiert.

MODE2 <MODUS2> .......... Ermöglicht den Standardbetrieb.

Auch nach erfolgter Einstellung können Änderungen mittels [Operation

mode] <BETRIEBSMODUS> im Menü des Monitors vorgenommen

werden. (Siehe BEDIENUNGSANLEITUNG.)

n

Betriebs Modus

Wenn der Monitor zum ersten Mal in Betrieb genommen wird,

erscheint das Betriebsmodus-Einstellfenster. Wählen Sie hier

[Mode1]<Modus1> oder [Mode2]<Modus2> aus.

[Mode1]<Modus1>

............

Erfolgt mindestens 4 Stunden lang keine Befehlseingabe,

schaltet sich der Monitor automatisch aus.

[Mode2]<Modus2>

............Ermöglicht den Standardbetrieb.

Auch nach erfolgter Einstellung können Änderungen mittels [Operation

Mode] <Betriebs Modus> im Menü des Monitors vorgenommen

werden.(Siehe BEDIENUNGSANLEITUNG.)

Printed in China

Imprimé en Chine

Impreso en China

Gedruckt in China

Sharp LLS201A Owner's manual

This manual is also suitable for

Sharp LLS201A Owner's manual

in other languages

Related papers

Other documents