K00370 ADAPTER KIT
Installation Instructions
The K00370 kit is used for installing 30" ice machines on a Manitowoc “S-970 or B-970” bin.
1. Installation (bin must be level before starting):
a. Remove protective coating from entire support, bin adaptor prior to assembly.
b. Place support, bin adaptor on bin as noted with angled flange forward, center on existing foam tape on
top of bin. Note: no fasteners are required.
c. Apply foam tape supplied with kit around perimeter of support, bin adaptor opening as shown.
d. Refer to Ice Machine Installation Manual for ice machine installation procedures.
Manitowoc Ice, Inc.
2110 South 26
th
Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 8016263
Web Site - www.manitowocice.com Rev 02
BIN DOOR
FOAM TAPE
Important: assemble a support, bin adaptor with
underside flange with angled ends towards the
“front” bin door
/