LG 55UB820T Owner's manual

*MFL68140540*

UB80**

UB82**

UB83**

Please read this manual carefully before operating

your set and retain it for future reference.

P/NO : MFL68140540 (1406-REV00)

www.lg.com

OWNER’S MANUAL

LED TV

*

* Disclaimer

LG LED TV applies LCD screen with LED backlights.

ENGENGLISH

LICENSES / OPEN SOURCE SOFTWARE NOTICE / EXTERNAL CONTROL DEVICE SETUP

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are

trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Denition Multimedia Interface, and the HDMI logo are

trademarks or registered trademarks of HDMI Licensing LLC in the United States and other

countries.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of

Rovi Corporation. This is an ofcial DivX Certied® device that plays DivX video. Visit divx.

com for more information and software tools to convert your les into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certied® device must be registered in order

to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code,

locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more infor-

mation on how to complete your registration.

“DivX Certied® to play DivX® video up to HD 1080p, including premium content.”

“DivX®, DivX Certied® and associated logos are trademarks of Rovi Corporation or its

subsidiaries and are used under license.”

“Covered by one or more of the following U.S. patents :

7,295,673; 7,460,668; 7,515,710; 7,519,274”

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other

U.S. and worldwide patents issued & pending. DTS, the Symbol & DTS and the Symbol

together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other

U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol

together are registered trademarks & DTS 2.0 Channel is a trademark of DTS, Inc. Product

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product,

please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for

download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such

distribution (such as the cost of media, shipping and handling) upon email request to [email protected]. This offer is

valid for three (3) years from the date on which you purchased the product.

EXTERNAL CONTROL DEVICE SETUP

To obtain the external control device setup information, please visit www.lg.com

(Only LA61**)

(Only LN565*)

4

ENG

ENGLISH

SAFETY INSTRUCTIONS

Please read these safety precautions carefully before using the product.

WARNING

y

Do not place the TV and/or remote control

in the following environments:

- A location exposed to direct sunlight

- An area with high humidity such as a

bathroom

- Near any heat source such as stoves

and other devices that produce heat

- Near kitchen counters or humidifiers

where they can easily be exposed to

steam or oil

- An area exposed to rain or wind

- Near containers of water such as vases

Otherwise, this may result in fire, electric

shock, malfunction or product deformation.

y

Do not place the product where it might be

exposed to dust.

This may cause a fire hazard.

y

Mains Plug is the TV connecting/

disconnecting device to AC mains electric

supply. This plug must remain readily

attached and operable when TV is in use.

y

Do not touch the power plug with wet

hands. Additionally, if the cord pin is wet

or covered with dust, dry the power plug

completely or wipe dust off.

You may be electrocuted due to excess

moisture.

y

Make sure to connect Mains cable to

compliant AC mains socket with Grounded

earth pin. (Except for devices which

are not grounded on earth.) Otherwise

possibility you may be electrocuted or

injured.

y

Insert power cable plug completely into

wall socket otherwise if not secured

completely into socket, fire ignition may

break out.

y

Ensure the power cord does not come into

contact with hot objects such as a heater.

This may cause a fire or an electric shock

hazard.

y

Do not place a heavy object, or the

product itself, on power cables.

Otherwise, this may result in fire or electric

shock.

y

Bend antenna cable between inside and

outside building to prevent rain from

flowing in.

This may cause water damaged inside the

Product and could give an electric shock.

5

ENGENGLISH

SAFETY INSTRUCTIONS

y

When mounting TV onto wall make sure to

neatly install and isolate cabling from rear

of TV as to not create possibility of electric

shock /fire hazard.

y

Do not plug too many electrical devices

into a single multiple electrical outlet.

Otherwise, this may result in fire due to

over-heating.

y

Do not drop the product or let it fall over

when connecting external devices.

Otherwise, this may result in injury or

damage to the product.

y

Keep the anti-moisture packing material or

vinyl packing out of the reach of children.

Anti-moisture material is harmful if

swallowed. If swallowed by mistake, force

the patient to vomit and visit the nearest

hospital. Additionally, vinyl packing can

cause suffocation. Keep it out of the reach

of children.

Desiccant

y

Do not let your children climb or cling onto

the TV. Otherwise, the TV may fall over,

which may cause serious injury.

y

Dispose of used batteries carefully

to ensure that a small child does not

consume them. Please seek Doctor-

Medical Attention immediately if child

consumes batteries.

y

Do not insert any metal objects/conductors

(like a metal chopstick/cutlery/screwdriver)

between power cable plug and input Wall

Socket while it is connected to the input

terminal on the wall. Additionally, do not

touch the power cable right after plugging

into the wall input terminal. You may be

electrocuted. (Depending on model)

y

Do not put or store inflammable

substances near the product. There is a

danger of combustion/explosion or fire due

to careless handling of the inflammable

substances.

y

Do not drop metallic objects such as

coins, hair pins, chopsticks or wire into

the product, or inflammable objects such

as paper and matches. Children must

pay particular attention. Electrical shock,

fire or injury can occur. If a foreign object

is dropped into the product, unplug the

power cord and contact the service centre.

y

Do not spray water on the product or

scrub with an inflammable substance

(thinner or benzene). Fire or electric shock

accident can occur.

6

ENG

ENGLISH

SAFETY INSTRUCTIONS

y

Do not allow any impact, shock or any

objects to fall into the unit, and do not

drop anything onto the screen.

You may be injured or the product can be

damaged.

y

Never touch this product or antenna

during a thunder or lighting storm.

You may be electrocuted.

y

Never touch the wall outlet when there is

leakage of gas, open the windows and

ventilate.

It may cause a fire or a burn by a spark.

y

Do not disassemble, repair or modify the

product at your own discretion.

Fire or electric shock accident can occur.

Contact the service centre for check,

calibration or repair.

y

If any of the following occur, unplug the product

immediately and contact your local service

centre.

- The product has been impacted by shock

- The product has been damaged

- Foreign objects have entered the product

- The product produced smoke or a strange

smell

This may result in fire or electric shock.

y

Unplug the TV from AC mains wall socket if you

do not intend to use the TV for a long period of

time. Accumulated dust can cause fire hazard

and insulation deterioration can cause electric

leakage/shock/fire.

y

Apparatus shall not be exposed to dripping

or splashing and no objects filled with liquids,

such as vases, shall be placed on the

apparatus.

y

Do not install this product on a wall if it could

be exposed to oil or oil mist.

This may damage the product and cause it to

fall.

CAUTION

y

Install the product where no radio wave occurs.

y

There should be enough distance between an

outside antenna and power lines to keep the

former from touching the latter even when the

antenna falls.

This may cause an electric shock.

y

Do not install the product on places such

as unstable shelves or inclined surfaces.

Also avoid places where there is vibration or

where the product cannot be fully supported.

Otherwise, the product may fall or flip over,

which may cause injury or damage to the

product.

7

ENG

ENGLISH

SAFETY INSTRUCTIONS

y

If you install the TV on a stand, you need

to take actions to prevent the product from

overturning. Otherwise, the product may

fall over, which may cause injury.

y

If you intend to mount the product to a

wall, attach VESA standard mounting

interface (optional parts) to the back of the

product. When you install the set to use

the wall mounting bracket (optional parts),

fix it carefully so as not to drop.

y

Only use the attachments / accessories

specified by the manufacturer.

y

When installing the antenna, consult with a

qualified service technician. If not installed

by a qualified technician, this may create

a fire hazard or an electric shock hazard.

y

We recommend that you maintain a

distance of at least 2 to 7 times the

diagonal screen size when watching TV.

If you watch TV for a long period of time,

this may cause blurred vision.

y

Only use the specified type of battery.

This could cause damage to the remote

control.

y

Do not mix new batteries with old

batteries. This may cause the batteries to

overheat and leak.

y

Batteries should not be exposed to

excessive heat. For example, keep away

from direct Sunlight, open fireplace and

electric heaters.

y

Do not place non-rechargeable batteries

in charging device.

y

Make sure there are no objects between

the remote control and its sensor.

y

Signal from Remote Control can be

interrupted due to external/internal lighting

eg Sunlight, fluorescent lighting.If this

occurs turn off lighting or darken viewing

area.

y

When connecting external devices such

as video game consoles, make sure the

connecting cables are long enough.

Otherwise, the product may fall over,

which may cause injury or damage the

product.

y

Do not turn the product On/Off by

plugging-in or unplugging the power plug

to the wall outlet. (Do not use the power

plug for switch.)

It may cause mechanical failure or could

give an electric shock.

y

Please follow the installation instructions

below to prevent the product from

overheating.

- The distance between the product and

the wall should be more than 10 cm.

- Do not install the product in a place with

no ventilation (e.g., on a bookshelf or in

a cupboard).

- Do not install the product on a carpet or

cushion.

- Make sure the air vent is not blocked by

a tablecloth or curtain.

Otherwise, this may result in fire.

8

ENG

ENGLISH

SAFETY INSTRUCTIONS

y

Take care not to touch the ventilation

openings when watching the TV for long

periods as the ventilation openings may

become hot. This does not affect the

operation or performance of the product.

y

Periodically examine the cord of your

appliance, and if its appearance indicates

damage or deterioration, unplug it,

discontinue use of the appliance, and

have the cord replaced with an exact

replacement part by an authorized

servicer.

y

Prevent dust collecting on the power plug

pins or outlet.

This may cause a fire hazard.

y

Protect the power cord from physical or

mechanical abuse, such as being twisted,

kinked, pinched, closed in a door, or

walked upon. Pay particular attention to

plugs, wall outlets, and the point where

the cord exits the appliance.

y

Do not press strongly upon the panel with

a hand or sharp object such as nail, pencil

or pen, or make a scratch on it, as it may

cause damage to screen.

y

Avoid touching the screen or holding your

finger(s) against it for long periods of time.

Doing so may produce some temporary or

permanent distortion/damage to screen.

y

When cleaning the product and its

components, unplug the power first

and wipe it with a soft cloth. Applying

excessive force may cause scratches or

discolouration. Do not spray with water

or wipe with a wet cloth. Never use glass

cleaner, car or industrial shiner, abrasives

or wax, benzene, alcohol etc., which can

damage the product and its panel.

Otherwise, this may result in fire, electric

shock or product damage (deformation,

corrosion or breakage).

y

As long as this unit is connected to the AC

wall outlet, it is not disconnected from the

AC power source even if you turn off this

unit by SWITCH.

y

When unplugging the cable, grab the plug

and unplug it, by pulling at the plug. Don’t

pull at the cord to unplug the power cord

from the power board, as this could be

hazardous.

y

When moving the product, make sure

you turn the power off first. Then, unplug

the power cables, antenna cables and all

connecting cables.

The TV set or power cord may be

damaged, which may create a fire hazard

or cause electric shock.

y

When moving or unpacking the product,

work in pairs because the product is

heavy.

Otherwise, this may result in injury.

9

ENGENGLISH

SAFETY INSTRUCTIONS

y

Contact the service centre once a year to

clean the internal parts of the product.

Accumulated dust can cause mechanical

failure.

y

Refer all servicing to qualified service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power supply cord or plug

is damaged, liquid has been spilled or

objects have fallen into the apparatus, the

apparatus has been exposed to rain or

moisture, does not operate normally, or

has been dropped.

y

If the product feels cold to the touch, there

may be a small “flicker” when it is turned

on. This is normal, there is nothing wrong

with product.

y

The panel is a high technology display

product with resolution of two million to six

million pixels. You may see tiny black dots

and/or brightly coloured dots (red, blue or

green) at a size of 1 ppm on the panel.

This does not indicate a malfunction and

does not affect the performance and

reliability of the product.

This phenomenon also occurs in third-

party products and is not subject to

exchange or refund.

y

You may find different brightness and

colour of the panel depending on your

viewing position(left/right/top/down).

This phenomenon occurs due to the

characteristic of the panel. It is not related

with the product performance, and it is not

malfunction.

y

Displaying a still image (e.g., broadcasting

channel logo, on-screen menu, scene from

a video game) for a prolonged time may

cause damage to the screen, resulting

in retention of the image, which is known

as image sticking. The warranty does not

cover the product for image sticking.

Avoid displaying a fixed image on your

television’s screen for a prolonged period

(2 or more hours for LCD, 1 or more hours

for Plasma).

Also, if you watch the TV at a ratio of 4:3

for a long time, image sticking may occur

on the borders of the panel.

This phenomenon also occurs in third-

party products and is not subject to

exchange or refund.

y

Generated Sound

“Cracking” noise: A cracking noise that occurs

when watching or turning off the TV is generated

by plastic thermal contraction due to tempera-

ture and humidity. This noise is common for

products where thermal deformation is required.

Electrical circuit humming/panel buzzing:

A low level noise is generated from a high-

speed switching circuit, which supplies a large

amount of current to operate a product. It varies

depend-ing on the product.

This generated sound does not affect the

performance and reliability of the product.

10

ENG

ENGLISH

SAFETY INSTRUCTIONS

Viewing 3D Imaging

(Only 3D models)

WARNING

Viewing Environment

y

Viewing Time

- When watching 3D contents, take 5 - 15

minute breaks every hour. Viewing 3D

contents for a long period of time may

cause headache, dizziness, fatigue or

eye strain.

Those that have a photosensitive

seizure or chronic illness

y

Some users may experience a seizure or

other abnormal symptoms when they are

exposed to a ashing light or particular

pattern from 3D contents.

y

Do not watch 3D videos if you feel nausea,

are pregnant and/ or have a chronic illness

such as epilepsy, cardiac disorder, or blood

pressure disease, etc.

y

3D Contents are not recommended to those

who suffer from stereo blindness or stereo

anomaly. Double images or discomfort in

viewing may be experienced.

y

If you have strabismus (cross-eyed),

amblyopia (weak eyesight) or astigmatism,

you may have trouble sensing depth and

easily feel fatigue due to double images. It

is advised to take frequent breaks than the

average adult.

y

If your eyesight varies between your right

and left eye, revise your eyesight prior to

watching 3D contents.

Symptoms which require discontinuation

or refraining from watching 3D contents

y

Do not watch 3D contents when you feel

fatigue from lack of sleep, overwork or

drinking.

y

When these symptoms are experienced,

stop using/watching 3D contents and get

enough rest until the symptom subsides.

- Consult your doctor when the symptoms

persist. Symptoms may include

headache, eyeball pain, dizziness,

nausea, palpitation, blurriness,

discomfort, double image, visual

inconvenience or fatigue.

CAUTION

Viewing Environment

y

Viewing Distance

- Maintain a distance of at least twice the

screen diagonal length when watching

3D contents. If you feel discomfort in

viewing 3D contents, move further away

from the TV.

Viewing Age

y

Infants/Children

- Usage/ Viewing 3D contents for children

under the age of 5 are prohibited.

- Children under the age of 10 may

overreact and become overly excited

because their vision is in development

(for example: trying to touch the

screen or trying to jump into it. Special

monitoring and extra attention is

required for children watching 3D

contents.

- Children have greater binocular

disparity of 3D presentations than adults

because the distance between the eyes

is shorter than one of adults. Therefore

they will perceive more stereoscopic

depth compared to adults for the same

3D image.

y

Teenagers

- Teenagers under the age of 19 may

react with sensitivity due to stimulation

from light in 3D contents. Advise them

to refrain from watching 3D contens for

a long time when they are tired.

y

Elderly

- The elderly may perceive less 3D

effect compared to the youth. Do not sit

closer to the TV than the recommended

distance.

Cautions when using the 3D glasses

y

Make sure to use LG 3D glasses. Otherwise,

you may not be able to view 3D videos

properly.

y

Do not use 3D glasses instead of your

normal glasses, sunglasses or protective

goggles.

y

Using modied 3D glasses may cause eye

strain or image distortion.

y

Do not keep your 3D glasses in extremely

high or low temperatures. It will cause

deformation.

y

The 3D glasses are fragile and are easy

to be scratched. Always use a soft, clean

piece of cloth when wiping the lenses. Do

not scratch the lenses of the 3D glasses

with sharp objects or clean/wipe them with

chemicals.

11

ENGENGLISH

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

NOTE

y

Image shown may differ from your TV.

y

Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

y

The available menus and options may differ from the input source or product model that you are

using.

y

New features may be added to this TV in the future.

y

The TV can be placed in standby mode in order to reduce the power consumption. And the TV

should be turned off if it will not be watched for some time, as this will reduce energy consumption.

y

The energy consumed during use can be signicantly reduced if the level of brightness of the

picture is reduced, and this will reduce the overall running cost.

INSTALLATION PROCEDURE

1 Open the package and make sure all the accessories are included.

2 Attach the stand to the TV set.

3 Connect an external device to the TV set.

4 Make sure the network connection is available.

You can use the TV network functions only when the network connection is made.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local

dealer where you purchased your product. The illustrations in this manual may differ from the actual

product and item.

CAUTION

y

Do not use any unapproved items to ensure the safety and product life span.

y

Any damages or injuries by using unapproved items are not covered by the manufacturer’s

warranty.

y

Some models have a thin lm attached on to the screen and this must not be removed.

12

ENG

ENGLISH

ASSEMBLING AND PREPARING

FREEZE

RATIO

L/R SELECT

ENTER

BACK

EXIT

Q.MENU

INFO

MENU

CHVOL

P

A

G

E

FAV

3D

MUTE

1 2 3

4 5 6

7 8

0

9

MARK

LIST

FLASHBK

ENERGY

SAVING

TV

AV MODE

INPUT

FREEZE

RATIO

L/R SELECT

ENTER

BACK

EXIT

Q.MENU

INFO

MENU

CHVOL

P

A

G

E

FAV

3D

MUTE

1 2 3

4 5 6

7 8

0

9

MARK

LIST

FLASHBK

ENERGY

SAVING

TV

AV MODE

INPUT

Magic remote, Batteries

(AA)

(Only UB82/83**)

(See p.30)

Remote control, Batteries

(AAA)

The remote control will not be

included for all sales market.

(Depending on model)

(See p.29)

Owner’s manual

Power Cord

(Depending on model)

Cable Holder

(Depending on model)

(See p.23)

Cable Managements

2EA

(See p.23)

Ferrite core

(Depending on model)

(See p.14)

Stand Screws

(Only UB80/82**)

4EA, M4 X L20

(See p.19)

Stand Base

(Only UB80/82**)

(See p.19)

Stand Screws

(Only UB83**)

4EA, M4 X L21

(See p.19)

Stand Base

(Only UB83**)

(See p.19)

Component gender cable

(See p.26)

13

ENGENGLISH

ASSEMBLING AND PREPARING

Composite gender cable

(See p.26)

Cinema 3D Glasses

The number of 3D glasses

may differ depending on the

model or country.

(Only UB83**)

NOTE

y

The items supplied with your product may vary depending on the model.

y

Product specications or contents of this manual may be changed without prior notice due to

upgrade of product functions.

y

For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm

thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB

memory stick does not t into your TV’s USB port.

A

B

A

B

*A

<

=

10 mm

*B

<

=

18 mm

How to use the ferrite core (Depending on model)

y

Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the LAN

cable once on the ferrite core. Place the ferrite core close to the TV.

[Cross Section of Ferrite Core]

[to the TV] [to an External device]

14

ENG

ENGLISH

ASSEMBLING AND PREPARING

Separate purchase

Separate purchase items can be changed or modified for quality improvement without any notification.

Contact your dealer to buy these items.

These devices only work with certain models.

AG-F***DP

Dual Play Glasses

AG-F***

Cinema 3D Glasses

AN-MR500

Magic Remote

AN-VC5**

Video Call Camera

LG Audio Device

Compatibility

UB82**

UB80**

UB83**

AG-F***DP

Dual Play Glasses

•

AG-F***

Cinema 3D Glasses

•

AN-MR500

Magic Remote

• •

AN-VC5**

Video Call Camera

• •

LG Audio Device

• •

The model name or design may be changed depending on the upgrade of product functions,

manufacturer’s circumstances or policies.

15

ENGENGLISH

ASSEMBLING AND PREPARING

Parts and buttons

UB80/82**

1

Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

2

Joystick Button - This button is located behind the TV screen.

NOTE

y

You can set the power indicator light to on or off by selecting

OPTION

in the main menus.

Screen

Speakers

Remote control and

Intelligent

1

sensors

Power Indicator

Joystick Button

2

Screen

Speakers

Remote control and

Intelligent

1

sensors

Power Indicator

Joystick Button

2

UB83**

16

ENG

ENGLISH

ASSEMBLING AND PREPARING

Using the joystick button

You can operate the TV by pressing the button or moving the joystick left, right, up, or down.

Basic Functions

Power On

When the TV is turned off, place your finger on the joystick

button and press it once and release it.

Power Off

When the TV is turned on, place your finger on the joystick

button and press it once for a few seconds and release it.

(However, if the Menu button is on the screen, pressing and

holding the joystick button will let you exit the Menu.)

Volume Control

If you place your finger over the joystick button and move it

left or right, you can adjust the volume level you want.

Programmes

Control

If you place your finger over the joystick button and move it

forward and backward, you can scrolls through the saved

programmes you want.

y

When your nger over the joystick button and push it to the up, down, left or right, be careful

not to press the joystick button. If you press the joystick button rst, you can not adjust the

volume level and saved programmes.

NOTE

Adjusting the Menu

When the TV is turned on, press the joystick button one time.

You can adjust the Menu items( , , , ) moving the joystick button up, down, left or right.

TV off

Turns the power off.

Settings

Accesses the main menu.

Close

Clears on-screen displays and returns to TV viewing.

Input List

Changes the input source.

17

ENGENGLISH

ASSEMBLING AND PREPARING

Lifting and moving the TV

Please note the following advice to prevent the

TV from being scratched or damaged and for

safe transportation regardless of its type and

size.

CAUTION

y

Avoid touching the screen at all times, as

this may result in damage to the screen.

y

It is recommended to mVove the TV in the

box or packing material that the TV originally

came in.

y

Before moving or lifting the TV, disconnect

the power cord and all cables.

y

When holding the TV, the screen should face

away from you to avoid damage.

y

Hold the top and bottom of the TV frame

rmly. Make sure not to hold the transparent

part, speaker, or speaker grill area.

y

When transporting a large TV, there should

be at least 2 people.

y

When transporting the TV by hand, hold the

TV as shown in the following illustration.

y

When transporting the TV, do not expose the

TV to jolts or excessive vibration.

y

When transporting the TV, keep the TV

upright, never turn the TV on its side or tilt

towards the left or right.

y

Do not apply excessive pressure to cause

exing /bending of frame chassis as it may

damage screen.

18

ENG

ENGLISH

ASSEMBLING AND PREPARING

Setting up the TV

Image shown may differ from your TV.

Attaching the stand

UB80/82**

1

1 Attach the stand to the TV using the upper

mounting hole on the back of the TV.

2 Attach the stand to the TV using the lower

connection on the back of the TV.

A Stand Base

B Stand Base

1

2

1 Attach the stand to the TV using the upper

mounting hole on the back of the TV.

2 Attach the stand to the TV using the lower

connection on the back of the TV.

A Stand Base

B Stand Base

2

4EA

M4 x L20

UB83**

1

2

4EA

M4 x L21

19

ENGENGLISH

ASSEMBLING AND PREPARING

CAUTION

y

When attaching the stand to the TV

set, place the screen facing down on a

cushioned table or at surface to protect the

screen from scratches.

y

Make sure that the screws are fastened

completely. (If they are not fastened

securely enough, the TV may tilt forward

after being installed.)

Do not fasten the screws with excessive

force otherwise they may be worn out and

become loose.

NOTE

y

Remove the stand before installing the TV

on a wall mount by performing the stand

attachment in reverse.

Mounting on a table

1 Lift and tilt the TV into its upright position on a

table.

- Leave a 10 cm (minimum) space from

the wall for proper ventilation.

10 cm

2 Connect the power cord to a wall outlet.

CAUTION

y

Do not place the TV near or on sources

of heat, as this may result in re or other

damage.

WARNING

y

If a television is not positioned in a

sufciently stable location, it can be

potentially hazardous due to falling. Many

injuries, particularly to children, can be

avoided by taking simple precautions such

as:

»

Using cabinets or stands

recommended by the manufacturer

of the television.

»

Only using furniture that can safely

support the television.

»

Ensuring the television is not

overhanging the edge of the

supporting furniture.

»

Not placing the television on tall

furniture (for example, cupboards or

bookcases) without anchoring both

the furniture and the television to a

suitable support.

»

Not standing the televisions on cloth

or other materials placed between

the television and supporting

furniture.

»

Educating children about the dangers

of climbing on furniture to reach the

television or its controls.

20

Page is loading ...

LG 55UB820T Owner's manual

LG 55UB820T Owner's manual

Related papers

Other documents