Groupe Brandt 5H-185BEPOCA Owner's manual

PROG.3'05 6/4/05 16:09 Página 1

Page is loading ...

PROG.3'05 6/4/05 16:09 Página 4

Page is loading ...

Para ajustar la hora:

• Presione el mando inferior y gírelo a la izquierda hasta que las agujas indiquen

la hora actual.

Si desea utilizar el horno sin programar, lleve el mando inferior a la posición

y haga coincidir la flecha roja con la hora que indican las agujas del reloj, pre

sionando y girando el mando superior a la izquierda. El horno podrá funcio

nar sin límite de tiempo.

Ejemplo: hora actual 12:20.

Si desea programar el horno, siga las instrucciones facilitadas en los apartados

“Duración del Cocinado” y/o “Inicio del Cocinado”.

Para ajustar la duración del cocinado:

1. Seleccione una función de cocinado y ajuste una temperatura.

“Duración del Cocinado”

a

Mediante esta función, el horno se desconecta automáticamente al finalizar el tiem-

po de cocción previamente programado.

Al conectar el horno a la red eléctrica o tras un corte en el suministro eléctrico usted

tendrá que poner en hora el reloj del programador.

6

FUNCIONES DE TIEMPO

RELOJ

PROG.3'05 6/4/05 16:09 Página 6

Page is loading ...

11

PROGRAMADOR ANALÓGICO DE ARRANQUE-PARAGEM

1. Comando superior

2. Seta vermelha

3. Comando inferior

PROG.3'05 6/4/05 16:09 Página 11

12

Para acertar a hora:

• Prima o comando inferior e rode-o para a esquerda até os ponteiros indicarem

a hora certa.

Se pretender utilizar o forno sem o programar, coloque o comando inferior na

posição e faça a seta vermelha coincidir com a hora indicada pelos pontei

ros do relógio, premindo e rodando o comando superior para a esquerda.

Desta forma, o forno poderá funcionar sem limite de tempo.

Exemplo: hora actual 12:20.

Se pretender programar o forno, siga as instruções dadas nos capítulos

“Duração da cozedura” e/ou “Início da cozedura”.

Para programar a duração da cozedura:

1. Seleccione uma função de cocção e uma temperatura.

“Duração da Cozedura”

a

Através desta função, o forno desliga-se automaticamente quando acabar o tempo

de cocção programado previamente.

Quando se liga o forno à rede eléctrica ou quando existe um corte no fornecimento

de corrente eléctrica, é necessário acertar o relógio do programador.

FUNÇÕES DE TEMPO

RELÓGIO

PROG.3'05 6/4/05 16:09 Página 12

Page is loading ...

17

PROGRAMMATEUR ANALOGIQUE DE MARCHE/ARRÊT

1. Commande supérieure

2. Flèche rouge

3. Commande inférieure

PROG.3'05 6/4/05 16:09 Página 17

18

Pour régler l’heure :

• Enfoncez la commande inférieure et tournez-la vers la gauche jusqu’à ce que

les aiguilles indiquent l’heure actuelle.

Si vous souhaitez utiliser le four sans le programmer, mettez la commande

inférieure sur la position et faites coïncider la flèche rouge avec l’heure

indiquée par les aiguilles de l’horloge, en enfonçant et en tournant la comman-

de supérieure vers la gauche. Le four pourra fonctionner sans limite de temps.

Exemple : heure actuelle 12:20.

Si vous souhaitez programmer le four, suivez les instructions fournies dans les

chapitres “Durée de la cuisson” et/ou “Début de la cuisson”.

Pour régler la durée de la cuisson :

1. Sélectionnez une fonction de cuisson et réglez la température.

“Durée de la cuisson”

a

Cette fonction permet au four de s’arrêter automatiquement à la fin du temps de cuis-

son préalablement programmé.

Quand vous branchez le four au réseau électrique, ou après une coupure de cou-

rant, vous devez remettre l’horloge du programmateur à l‘heure.

FONCTIONS DE TEMPS

HORLOGE

PROG.3'05 6/4/05 16:09 Página 18

Page is loading ...

23

STOP/START ANALOGUE TIMER

1. Upper control

2. Red arrow

3. Lower control

PROG.3'05 6/4/05 16:09 Página 23

24

To set the time:

• Press in the lower control and turn it to the left until the clock hands indicate the

correct time.

If you wish to use the oven without the timer function, turn the lower control to

the position and make the red arrow coincide with the time indicated on the

clock face, pressing in and turning the upper control to the left. The oven will

be permanently operational.

Example: current time 12:20.

If you wish to set the oven timer, follow the instructions provided in the sections

entitled “Cooking Duration” and/or “Auto-Start Cooking”.

To set the cooking duration time:

1. Select a cooking function and set a temperature.

“Cooking Duration”

a

With this function, the oven turns itself off automatically when the pre-set cooking time

has elapsed.

When the oven is connected to the mains electricity or following an interruption in the

power supply, you will have to set the timer clock.

TIMER FUNCTIONS

CLOCK

PROG.3'05 6/4/05 16:09 Página 24

25

To set the auto-start cooking time:

1. Select a cooking function and set a temperature.

2. Set how long you want the cooking to last by turning the lower control to the left.

Example: I want the oven to operate for 60 minutes.

“Auto-Start Cooking”

b

With this function, you can set your oven to switch itself on automatically at a parti-

cular time. The “Auto-Start Cooking” function is used simultaneously with the

“Cooking Duration” function so that the oven switches itself on automatically and,

after operating for a pre-set time, switches itself off again automatically.

Once the pre-set time has elapsed, the control will return to the “0” position, an alarm

bell will ring and the oven will turn itself off automatically. If you wish to stop the bell

ringing, turn the lower control to the position .

Do not forget to turn the function selector and the temperature selector to the “0”

position.

WARNING: the oven will not work while the control is set to the “0” or positions.

If you wish to use the oven without pre-setting a cooking duration, turn the lower con-

trol to the position and the oven will be able to operate permanently. Make sure

that the red arrow coincides with the time indicated on the clock face.

2. Set how long you want the cooking to last (maximum 180 minutes) by turning the

lower control to the left.

For example: I want the oven to operate for 60 minutes.

PROG.3'05 6/4/05 16:09 Página 25

26

3. Press in the upper control and turn it to the left until the red arrow indicates the

time you want cooking to start.

Example: I want cooking to start at 2 o’clock.

“Beeper”

c

If you follow the same procedure as in the “Cooking Duration” section but without tur-

ning on the oven, you will be able to use the beeper for anything you need to do in

the kitchen.

Example: I want the beeper to ring in 60 minutes.

Once the pre-set time has elapsed, the control will return to the “0” position, an alarm

bell will ring and the oven will turn itself off automatically.

If you wish to stop the bell ringing, turn the lower control to the position .

WARNING: the oven will not work while the control is set to the “0” or positions.

If you wish to use the oven without pre-setting the timer, turn the lower control to

the position and the oven will be able to operate permanently.

PROG.3'05 6/4/05 16:09 Página 26

27

You can block the timer so that it cannot be manipulated by children.

To lock the oven:

•Press in the lower control and turn it to the left until you select the symbol.

When you use the safety lock, the oven cannot be switched on.

To unlock the oven:

• If you wish to use the oven without the timer function, turn the lower control to

the position and make the red arrow coincide with the time indicated on

the clock face, pressing in and turning the upper control to the left. The oven

will be permanently operational.

Example: Current time 12:20.

“Safety lock”

If you wish to set the oven timer, follow the instructions provided in the sections enti-

tled “Cooking Duration” and/or “Auto-Start Cooking”.

If you wish to use the oven without the timer function, turn the lower control to the

position and make the red arrow coincide with the time indicated on the clock

face, pressing in and turning the upper control to the left. The oven will be perma-

nently operational.

Example: Current time 12:20.

MANUAL OPERATION

SAFETY FUNCTIONS

PROG.3'05 6/4/05 16:09 Página 27

28

PROG.3'05 6/4/05 16:09 Página 28

29

PROGRAMMATORE ANALOGICO DI

ATTIVAZIONE-DISATTIVAZIONE

1. Manopola superiore

2. Freccia rossa

3. Manopola inferiore

PROG.3'05 6/4/05 16:09 Página 29

30

Per regolare l’ora:

• Premere la manopola inferiore e ruotarla in senso antiorario fino a quando le

lancette non indichino l’ora corrente.

Per utilizzare il forno senza programmare un tempo di cottura, portare la mano

pola inferiore sulla posizione e far coincidere la freccia rossa con l’ora indi

cata dalle lancette dell’orologio, premendo e ruotando la manopola superiore in

senso antiorario. Il forno può così funzionare senza limite di tempo.

Esempio: Ora 12:20.

Per programmare il forno, seguire le istruzioni indicate nel paragrafo “Tempo di

cottura” e/o nel paragrafo “Inizio cottura”.

Per impostare il tempo di cottura:

1. Selezionare una funzione di cottura e impostare una temperatura.

“Tempo di cottura”

a

Con questa funzione, il forno si disattiva automaticamente al termine del tempo di

cottura programmato in precedenza.

Dopo l'allacciamento del forno alla rete elettrica o in seguito a un'interruzione di

corrente, è necessario regolare l’orologio del programmatore.

FUNZIONI DI DURATA

OROLOGIO

PROG.3'05 6/4/05 16:09 Página 30

Page is loading ...

35

ANALOGE START-/STOP-EINSTELLUNG

1. Oberer Schalter

2. Roter Pfeil

3. Unterer Schalter

PROG.3'05 6/4/05 16:09 Página 35

36

Einstellung der Uhr:

• Drücken Sie auf den unteren Schalter und drehen Sie ihn nach links, bis die

Zeiger die aktuelle Uhrzeit anzeigen.

Wenn Sie den Backofen benutzen möchten, ohne ihn zu programmieren, stellen

Sie den unteren Schalter auf die Position und bringen Sie den roten Pfeil mit

der angezeigten Uhrzeit in Übereinstimmung, indem Sie auf den oberen

Schalter drücken und ihn nach links drehen. Der Backofen kann jetzt ohne zei

tliche Begrenzung in Betrieb sein.

Beispiel: Aktuelle Uhrzeit 12:20.

Folgen Sie zum Programmieren des Backofens den Anweisungen in den

Abschnitten “Gardauer“ und/oder “Starten des Garvorgangs“.

Einstellung der Gardauer:

1. Wählen Sie eine Kochfunktion und stellen Sie die Temperatur ein.

“Gardauer”

a

Mit dieser Funktion schaltet sich der Backofen bei Ablauf der vorprogrammierten

Back-/Bratzeit automatisch aus.

Beim Anschließen des Backofens an die Stromversorgung oder nach einer

Unterbrechung der Stromversorgung müssen Sie die Uhr des Programmierelements

neu einstellen.

ZEITFUNKTIONEN

UHR

PROG.3'05 6/4/05 16:09 Página 36

Page is loading ...

41

ANALOGE WERKING/STILSTAND-PROGRAMMEUR

1. Bovenste knop

2. Rode pijl

3. Onderste knop

PROG.3'05 6/4/05 16:09 Página 41

42

Om het juiste uur in te stellen:

• Druk op de onderste knop en draai hem naar links totdat de wijzers het huidige

uur aanduiden.

ls u de oven wil gebruiken zonder hem te programmeren, moet u de onderste

knop op de stand zetten en de rode pijl doen samenvallen met het uur dat

de wijzers van de klok aangeven door op de bovenste knop te drukken en hem

naar links te draaien. De oven kan nu zonder tijdslimiet werken.

Bijvoorbeeld: huidig uur: 12.20 u.

Als u de oven wil programmeren, moet u de instructies volgen van de onderde

len “Bakduur” en/of “Bakbeginuur”.

Om de bakduur in te stellen:

1. Selecteer een bakfunctie en stel een temperatuur in.

“Bakduur”

a

Met deze functie schakelt de oven automatisch uit na verloop van de ingestelde bak-

duur.

Nadat u de oven op het elektrisch net heeft aangesloten of na een stroomonderbre-

king moet u op de klok van uw programmeur het juiste uur instellen.

KLOK

TIJDSFUNCTIES

PROG.3'05 6/4/05 16:09 Página 42

Page is loading ...

47

ANALOGICKÉ PROGRAMOVÁNÍ ZASTAVENÍ PROVOZU

1. Horní ovladač

2. Červená šipka

3. Spodní ovladač

PROG.3'05 6/4/05 16:10 Página 47

Page is loading ...

Groupe Brandt 5H-185BEPOCA Owner's manual

This manual is also suitable for

Groupe Brandt 5H-185BEPOCA Owner's manual

in other languages

Related papers

Other documents