DAP Audio ZPA-6240TU User manual

Brand: DAP Audio

Model: ZPA-6240TU

Category: Serial switch boxes

Type: User manual

This manual is also suitable for

D6180

ZPA-6240TU V1

Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands

Ordercode: D6180

MANUAL

ENGLISH

ZPA-6240TU

Ordercode: D6180

Table of contents

Warning ............................................................................................................................................................................... 2

Safety Instructions ......................................................................................................................................................... 2

Operating Determinations .......................................................................................................................................... 4

Connection with the mains......................................................................................................................................... 4

Return Procedure .......................................................................................................................................................... 5

Claims .............................................................................................................................................................................. 5

Description of the device ................................................................................................................................................. 6

Frontside.......................................................................................................................................................................... 7

Backside ......................................................................................................................................................................... 9

Audio Player .................................................................................................................................................................12

Installation .........................................................................................................................................................................13

Set Up and Operation .....................................................................................................................................................13

Connecting Inputs ......................................................................................................................................................14

Operating the Tuner ...................................................................................................................................................14

Searching for Radio Stations ..................................................................................................................................14

Tuning .........................................................................................................................................................................14

Storing a Radio Station in Memory .......................................................................................................................14

Operating the USB/SD player ...................................................................................................................................15

Selecting Tracks ........................................................................................................................................................15

Starting/Pausing Playback .....................................................................................................................................15

Stopping Playback ..................................................................................................................................................15

Repeat Functions .....................................................................................................................................................15

Record Function .......................................................................................................................................................16

Priority Settings .............................................................................................................................................................16

Updating Chime .........................................................................................................................................................17

Updating Messages ....................................................................................................................................................17

Connecting Outputs ........................................................................................................................................................17

Low Impedance Outputs ..........................................................................................................................................17

High Impedance Outputs .........................................................................................................................................17

Connection Cables .........................................................................................................................................................18

Maintenance ....................................................................................................................................................................18

Troubleshooting ...............................................................................................................................................................19

Product Specifications ....................................................................................................................................................19

Dimensions ........................................................................................................................................................................20

Notes ..................................................................................................................................................................................21

ZPA-6240TU

Ordercode: D6180

Warning

Unpacking Instructions

Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure

that all parts are present, and have been received in good condition. Notify the dealer immediately and

retain packing material for inspection if any parts appear damaged from shipping or the carton itself

shows signs of mishandling. Save the carton and all packing materials. In the event that a device must be

returned to the factory, it is important that the device is returned in the original factory box and packing.

Your shipment includes:

 DAP Audio ZPA-6240TU

 FM Antenna

 IEC power cable (1,5 m)

 User manual

Safety Instructions

Every person involved with the installation, operation and maintenance of this system has to:

 be qualified

 follow the instructions of this manual

Before you initial start-up, please make sure that there is no damage caused by transportation. Should

there be any, consult your dealer and do not use the system.

To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to

follow the safety instructions and warning notes written in this manual.

Please consider that damages caused by manual modifications to the system are not subject to

warranty.

This system contains no user-serviceable parts. Refer servicing to qualified technicians only.

ZPA-6240TU

Ordercode: D6180

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance of

this manual or any unauthorized modification to the system.

 Never let the power cord come into contact with other cables! Handle the power cord and all

connections with the mains with particular caution!

 Never remove warning or informative labels from the unit.

 Never use anything to cover the ground contact.

 Never leave any cables lying around.

 Do not insert objects into air vents.

 Do not connect this system to a dimmerpack.

 Do not switch the system on and off in short intervals, as this would reduce the system’s life.

 Do not open the device and do not modify the device.

 Do not drive the inputs with a signal level bigger, than required to drive the equipment to full output.

 Do not plug mics into the console (or stagebox) while phantom power is on. Also mute the monitor /

Pa system when turning phantom power on or off. Allow the system to adjust for a couple of

seconds, before setting the input gains.

 Only use system indoors, avoid contact with water or other liquids.

 Avoid flames and do not put close to flammable liquids or gases.

 Always disconnect power from the mains, when system is not used. Only handle the power cord by

the plug. Never pull out the plug by tugging the power cord.

 Always operate the unit with the AC ground wire connected to the electrical system ground.

 Make sure you do not use the wrong kind of cables or defective cables.

 Make sure that the signals into the mixer are balanced, otherwise hum could be created.

 Make sure you use DI boxes to balance unbalanced signals; All incoming signals should be clear.

 Make sure that the available voltage is not higher than stated on the rear panel.

 Make sure that the power cord is never crimped or damaged. Check the system and the power

cord from time to time.

 Please turn off the power switch, when changing the power cord or signal cable, or select the input

mode switch.

 Extreme frequency boosts in connection with a high input signal level may lead to overdriving your

equipment. Should this occur, it is necessary to reduce the input signal level by using the input

control.

 To emphasize a frequency range, you do not necessarily have to move its respective control

upward; try lowering surrounding frequency ranges instead. This way, you avoid causing the next

piece of equipment in your sound path to overdrive. You also preserve valuable dynamic reserve

(“headroom”).

 Avoid ground loops! Always be sure to connect the power amps and the mixing console to the

same electrical circuit to ensure the same phase!

 If system is dropped or struck, disconnect mains power supply immediately. Have a qualified

engineer inspect for safety before operating.

 If the system has been exposed to drastic temperature fluctuation (e.g. after transportation), do not

switch it on immediately. The arising condensation water might damage your system. Leave the

system switched off until it has reached room temperature.

 If your Dap Audio device fails to work properly, discontinue use immediately. Pack the unit securely

(preferably in the original packing material), and return it to your Dap Audio dealer for service.

 Repairs, servicing and electric connection must be carried out by a qualified technician.

 For replacement use fuses of same type and rating only.

 WARRANTY: Till one year after date of purchase.

ZPA-6240TU

Ordercode: D6180

Operating Determinations

This system is not designed for permanent operation. Consistent operation breaks will ensure that the

system will serve you for a long time without defects.

If this system is operated in any other way, than the one described in this manual, the product may suffer

damages and the warranty becomes void.

Any other operation may lead to dangers like short-circuit, burns, electric shock, etc.

You endanger your own safety and the safety of others!

Improper installation can cause serious damage to people and property !

Connection with the mains

Connect the device to the mains with the power-plug.

Always pay attention, that the right color cable is connected to the right place.

International

EU Cable

UK Cable

US Cable

BROWN

RED

YELLOW/COPPER

PHASE

BLUE

BLACK

SILVER

NEUTRAL

YELLOW/GREEN

GREEN

PROTECTIVE GROUND

Make sure that the device is always connected properly to the earth!

Improper installation can cause serious damage to people and property!

ZPA-6240TU

Ordercode: D6180

Return Procedure

Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.

Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned

without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.

Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.

Be prepared to provide the model number, serial number and a brief description of the cause for the

return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the

customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace

product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.

Note: If you are given an RMA number, please include the following information on a piece of paper

inside the box:

01) Your name

02) Your address

03) Your phone number

04) A brief description of the symptoms

Claims

The client has the obligation to check the delivered goods immediately upon delivery for any short-

comings and/or visible defects, or perform this check after our announcement that the goods are at their

disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be

reported to the carrier upon receipt of merchandise.

It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is

damaged due to shipping. Transportation damage has to be reported to us within one day after receipt

of the delivery.

Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with

a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless

otherwise agreed in writing.

Complaints against us must be made known in writing or by fax within 10 working days after receipt of the

invoice. After this period complaints will not be handled anymore.

Complaints will only then be considered if the client has so far complied with all parts of the agreement,

regardless of the agreement of which the obligation is resulting.

ZPA-6240TU

Ordercode: D6180

Description of the device

Features

The DAP Audio ZPA-6240TU is a 6-zone 100V amplifier, ideal for multizone public address systems. The

power consumption of the amplifier is 240W, divided into 6x40W, with separate volume control for each

zone. All outputs are protected by an overload and overheating detector. It is equipped with an MP3

player/recorder with a USB/SD input, an FM tuner, 4 microphone inputs and 2 line inputs for external audio

sources. All inputs have volume, treble and bass controls to set the desired balance and sound quality.

The ZPA-6240TU has a digital message player, which can store up to 6 pre-recorded messages. These

can be controlled with an external control connector or by using the dedicated PM-Six paging

microphone. There are 2 dedicated paging microphones available: PM-One (D6181) and PM-Six (D6182).

The PM-One is a regular paging microphone to make announcements for all zones, while the PM-Six has

can handle announcements and trigger the pre-recorded audio files on the desired zones. The ZPA-

6240TU works on 240V AC. It is also equipped with a 24V DC input, which automatically takes over when

main power supply shuts down in an emergency situation.

Outputs

 Zones: 6

 100V & 4Ω: Terminals

Inputs

 4 x Mic/Line: XLR/jack combo & terminals

 2 x Line: RCA

Media player

 Source: 1 x USB type A, 1 x SD card

 Supported file types: MP3 (48 KHz, 320 kbps)

 Format: FAT16/32 up to 32GB

 Playback: Repeat, Continuous

Media player - Tuner

 FM band: 87,5 – 108MHz

 Presets: 4

 Antenna: 75Ω

Features

 Speech filter: -3dB, 300Hz 6dB/oct

 Phantom power: 24V

 Tone control: Bass 100 Hz, treble 10 KHz, +/- 10 dB

 Chime: adjustable volume

 PTT: Mic input 1

 VOX: Mic input 2

 Telephone input: override all, terminal

General

 Power supply: 220-240V AC, 60/50 Hz

 Back-up power supply: 24V DC, 20A

 Power consumption: 340W

 Power connection: IEC power connector

 Dimensions:

394 x 480 x 145 mm (LxWxH)

19” x 3HE (LxH)

 Weight: 15 kg

Optional accessories

D6181 – PM-One (1-channel paging microphone)

D6182 – PM-Six (advanced 6-channel paging microphone)

ZPA-6240TU

Ordercode: D6180

Frontside

Fig. 01

Zone 1-6 volume controls

Turn the controls to adjust volume level for zone 1-6 signals.

Zone 1-6 buttons

Press the Z1-Z6 buttons to activate/deactivate zone outputs.

Press the ALL button to activate output for all 6 zones at the same time, at maximum volume level.

VU meter

The clip LED indicates peak levels at the output of the amplifier. If the red LED frequently blinks or

lights continuously, the output is likely to enter clipping. If this happens, we strongly suggest turning

the master volume control (15) to the left, to decrease the master volume.

Tuner/audio player

See section Audio Player, page 12.

Bass/treble controls

Turn the controls to adjust bass/treble level for inputs 1-6.

Input 1-6 volume level control

Turn the Remote 1 control to adjust the volume level for Mic 1 & PM-01.

Turn the Remote 2 control to adjust the volume level for Mic 2 & PM-06.

Turn the controls 3-6 to adjust the volume level for the inputs 3-6.

Chime button

Press the button to activate chime.

Chime level control

Turn the control to adjust chime level. In chime mode, all inputs except input 1 will be muted so that

it is possible to broadcast a message after the chime signal.

ZPA-6240TU

Ordercode: D6180

Telephone switch

Press the switch to activate/deactivate telephone input.

Paging level control

Turn the control to adjust the volume level for paging.

Ringer level control

Turn the control to adjust the volume level for the ringtone.

Alarm level control

Turn the control to adjust the volume level for the alarm signal.

Ringtone # 1 ON/OFF switch

Ringtone # 2 ON/OFF switch

Master volume control

Turn the control to adjust the master volume level, according to your preference.

Output protection LED indicator

The indicator will blink if a short circuit or output overload occur.

Power switch ON/OFF

Press this button to switch the device ON or OFF.

Power supply LED indicators

Depending on the currently used power supply, the corresponding indicator will light up (DC – drive

current, AC – alternate current, S/B – standby).

ZPA-6240TU

Ordercode: D6180

Backside

Fig. 02

100V terminal connector – IN

Connect the main feed cable from your 100V speaker to the “hot” terminal. Connect the common

cable from your speaker to the “cold” terminal.

NOTE: Do not connect the 100V and 4Ω speakers at the same time.

100V terminal connectors – OUT

Connect the main feed cable from your 100V speaker to the “hot” terminal. Connect the common

cable from your speaker to the “cold” terminal.

Low impedance 4Ω terminal connector

If you connect a low impedance speaker, then connect the main feed cable to the “hot” terminal

and the common cable to the “cold” terminal.

NOTE: Do not connect the 100V and 4Ω speakers at the same time.

Telephone ringer terminal connector – IN

Connect a telephone for calling and audio input

Paging terminal connector – IN

Connect a telephone for calling and audio input

Message first priority terminal connector

Connect an emergency alarm source.

External amplifier connector – 6,3 mm jack IN

Connect an external amplifier. When connected, all the other input signals will be suppressed.

Paging connector – 6,3 mm jack OUT

Connect an external amplifier. When connected, paging signal will be received in the paging area.

The non-paging signals will be output in all the other areas. If you do not connect any amplifier to this

connector, it will not be possible to output signals in any other area.

Recording connector – RCA OUT

Connect a signal source for external recording.

ZPA-6240TU

Ordercode: D6180

Line 6 connector – RCA IN

Connect an auxiliary signal source.

Line 5 connector – RCA IN

Connect an auxiliary signal source.

Line 1 – combo IN

Connect balanced or unbalanced inputs.

Gain control

If set to LINE, the input sensitivity will be set for line inputs. If set to MIC, the input sensitivity will be set

for microphone level.

Phantom power switch

Press the button to provide 24V power to condenser microphones.

75Ω FM antenna connector

Connect your FM antenna to this connector.

DC 24V terminal connector – OUT

Connect low-voltage backup equipment.

Cooling fan

Do not obstruct the air inlet.

PM-One connector – RJ45 IN

Connect up to 3 PM-One sets. Press the Phantom Power switch for Mic 1.

NOTE: Use cables no longer than 10 meters. Otherwise, you risk signal deterioration.

PM-Six connector – RJ45 IN

Connect up to 3 PM-Six sets.

NOTE: Use cables no longer than 10 meters. Otherwise, you risk signal deterioration.

PM-Six connector – RJ45 LINK

Connect to another amplifier, for advanced use.

Update section selector

Insert a USB flash drive, containing updates. Set the selector to the section which you would like to

update.

Set the selector to CHI, if you want to update the chime sound.

Set the selector to MSG if you want to update the digital message of the host.

Set the selector to PROG, if you want to update the software and audio priority setting.

ZPA-6240TU

Ordercode: D6180

Fig. 03

USB connector B

Connect the device to a PC, in order to carry out the necessary updates.

Message control connector

Designed to control the digital messages of the host. If you do not possess our PM-Six (D6182)

microphone system, you can still create a trigger button system, in order to control the messages.

See the chart below for more information about connecting the trigger buttons.

Remote power switch terminal connector

Connect a remote button, by means of which it is possible to remotely switch the device ON/OFF.

24V DC terminal connector – IN

This input can be used in mobile applications, such as boats, where 120 or 230V AC is not available

or in applications that must continue to operate in case of power shortage. When a 24V DC battery

is connected, the unit will operate on the supplied DC voltage. The amplifier has a built-in charger,

which charges the connected battery.

IEC power connector 230V AC

Connect the device to the appropriate power supply.

Ground/earth connection

ZPA-6240TU

Ordercode: D6180

Audio Player

Fig. 04

LCD display

button

Press the button to skip backwards.

button

Press the button to skip forwards.

Volume + button

Press the button to increase volume. The adjustment range is between 0-31, from OFF to loud.

In Priority Settings, press the button to set the input priority.

Volume - button

Press the button to decrease volume. The adjustment range is between 0-31, from OFF to loud.

In Priority Settings, press the button to set the input priority.

Mode button

Press the button to toggle between the 2 modes: Tuner mode and USB/SD player mode.

Stop/M4 button

In USB/SD player mode, press the button to stop playback.

In Tuner mode, press the button to recall preset # 4.

SD/USB/M3 button

In USB/SD player mode, press the button to toggle between the 2 source devices: USB and SD.

In Tuner mode, press the button to recall preset # 3.

Repeat/M2 button

In USB/SD player mode, press the button to toggle between the available repeat modes.

In Tuner mode, press the button to recall preset # 2.

ZPA-6240TU

Ordercode: D6180

Fig. 05

Play/pause/M1 button

In USB/SD player mode, press the button to start/pause playback.

In Tuner mode, press the button to recall preset # 1.

Record button

Press the button to record signal. Before recording, please select your signal input.

SD card slot

Insert an SD card, containing MP3 files.

USB connector A

Insert a USB flash drive, containing MP3 files.

Installation

Remove all packing materials from the ZPA-6240TU. Check if all foam and plastic padding is removed.

Secure the equipment into a 19" rack if preferred. Connect all cables.

Always disconnect from electric mains power supply before cleaning or servicing.

Damages caused by non-observance are not subject to warranty.

Set Up and Operation

Before plugging the unit in, always make sure that the power supply matches the product specification

voltage. Do not attempt to operate a 115V specification product on 230V power, or vice versa.

Before powering up the first time, make sure that the AC selector is set to the proper

voltage!

Damage caused by connecting the amplifier to improper AC voltage is not covered

by any warranty!

Always turn off and disconnect the amplifier from mains voltage before making audio

connections. The attenuators should always be turned down during power-up.

ZPA-6240TU

Ordercode: D6180

Connecting Inputs

Use the RCA, combo or terminal input connectors on the rear to supply audio signals to your DAP Audio

ZPA-6240TU amplifier. The RCA connectors accept unbalanced audio connections while the combo

connectors accept balanced and unbalanced audio connections.

Operating the Tuner

01) Press the Mode button (51) to select Tuner. The display will show:

Searching for Radio Stations

01) Press one of the preset buttons M1-M4 (52/53/54/55) to select previous/next radio station. There are 4

radio presets.

Tuning

01) Press and hold down the and for 2 seconds, to start automatic tuning. The tuner will keep

searching for a strong wavelength. Once it is found, the search will stop.

02) In order to fine-tune the signal quality, press the skip buttons and to move backwards or

forwards, until the signal quality is good.

03) The frequency range is between 87,5-108 MHz.

Storing a Radio Station in Memory

01) If you want to save a newly found radio station, press the Record button (56). The display will now

show all presets with the corresponding radio station frequencies:

02) Press and hold down the desired preset button M1-M4 (52/53/54/55), until the desired frequency

appears on the display.

03) Your radio station is now saved.

ZPA-6240TU

Ordercode: D6180

Operating the USB/SD player

01) Press the Mode button (51) to select Audio Player.

02) Connect the desired music source to the amplifier by inserting a USB flash drive/SD card into the

appropriate slots (57/58).

03) The display will show:

Selecting Tracks

01) Press the skip buttons and to select previous/next track. The selected track’s name and time

data will appear interchangeably on the display.

Starting/Pausing Playback

01) Once you have selected the desired track, press the button to start playback.

02) Press the button again to pause playback.

Stopping Playback

01) Press the button to stop playback.

Repeat Functions

01) Press repeatedly the Repeat button (54) to toggle between the following repeat functions:

Repeat one song

Continuous playback

Shuffle

Play folder

Play folder + shuffle

ZPA-6240TU

Ordercode: D6180

Record Function

01) Press the Record button (56) to proceed to record function. The display will show:

02) Press the Record button (56) again to start recording.

03) Press the button to stop recording.

04) The device will now return to USB player mode.

05) Now, press the and buttons to select your newly recorded file. The file’s name will be

recXX.mp3 (XX indicates the number of existing recordings).

06) Press the button to start playback.

07) Turn the Level control under the display to adjust the gain level for the recording.

08) If the LED Peak indicator under the display blinks. Lower the gain level (see step 7).

Priority Settings

01) While in Tuner mode or in USB/SD player mode, press and hold down the Mode button (51) to enter

priority settings. The display will show:

02) Press the skip buttons and to toggle through the following inputs:

 Mic_1 + PTT

 Mic_2 + PAG

 Mic_3

 Mic_4

 Aux_1

 Aux_2

 Tel_Voice

 Tel_Ring

 Chime

 Siren

 MP3+FM

 MESSAGE 6

03) Once you have chosen the desired input, press the volume buttons (49/50) to set the priority.

The adjustment range is between 1-4, from highest to lowest priority.

04) When the amplifier receives a signal at a high-priority input, the lower-priority inputs will be

muted/suppressed.

ZPA-6240TU

Ordercode: D6180

Updating Chime

01) Set the switch (39) to CHI position.

02) Connect the USB connector (40) to the USB connector on your PC to the device, by means of a USB

cable.

03) In Computer section on your PC, enter the removable disk.

04) Overwrite Chime.mp3 file with the new one.

Updating Messages

01) Set the switch (39) to MSG position.

02) Connect the USB connector (40) to the USB connector on your PC to the device, by means of a USB

cable.

03) In Computer section on your PC, enter the removable disk.

04) Overwrite the desired MSG_XXX.mp3 file with the new one.

Connecting Outputs

Speakers are connected by means of terminal connectors. See the examples below.

Low Impedance Outputs

You can use as many speakers as you want as long as the total impedance matches the amplifiers

output.

Example 1: Using the 4Ω output with a 4Ω speaker.

Fig. 06

Example 2: Using the 4Ω output with two 8Ω speakers.

Fig. 07

In a low impedance system, the total speaker load should always match the amplifier’s

impedance, in order not to overload the amplifier. The total speaker power should be at

least equal to the power of the amplifier, to avoid speaker damage.

High Impedance Outputs

While using either the 70V outputs or the 100V outputs, note that all speakers should be wired in parallel.

The total power of all speakers summed together should never exceed the total power of

the amplifier in a 70V or a 100V system!

ZPA-6240TU

Ordercode: D6180

Connection Cables

Take care of your cables, always holding them by the connectors and avoiding knots and twists when

coiling them: This gives the advantage of increasing their life and reliability. Periodically check your

cables. A great number of problems (faulty contacts, ground hum, discharges, etc.) are caused entirely

by using unsuitable or faulty cables.

Unbalanced

Balanced

For these applications the unit provides 1/4" TRS and XLR connectors to easily interface with most

professional audio devices. Follow the configuration examples below for your particular connection.

Maintenance

The DAP Audio ZPA-6240TU requires almost no maintenance. However, you should keep the unit clean.

Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in

liquid. Do not use alcohol or solvents.

Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp

cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.

ZPA-6240TU

Ordercode: D6180

Troubleshooting

DAP Audio ZPA-6240TU

This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps

below in sequence until a solution is found. Once the unit operates properly, do not carry out following

steps.

01) If the device does not operate properly, unplug the device.

02) Check power from the wall, all cables, connections, etc.

03) If all of the above appears to be O.K., plug the unit in again.

04) If nothing happens after 30 seconds, unplug the device.

05) Return the device to your DAP Audio dealer.

Product Specifications

Outputs

 Zones: 6

 100V & 4Ω: Terminals

Inputs

 4 x Mic/Line: XLR/jack combo & terminals

 2 x Line: RCA

Media player

 Source: 1 x USB type A, 1 x SD card

 Supported file types: MP3 (48 KHz, 320 kbps)

 Format: FAT16/32 up to 32GB

 Playback: Repeat, Continuous

Media player - Tuner

 FM band: 87,5 – 108MHz

 Presets: 4

 Antenna: 75Ω

Features

 Speech filter: -3dB, 300Hz 6dB/oct

 Phantom power: 24V

 Tone control: Bass 100 Hz, treble 10 KHz, +/- 10 dB

 Chime: adjustable volume

 PTT: Mic input 1

 VOX: Mic input 2

 Telephone input: override all, terminal

General

 Power supply: 220-240V AC, 60/50 Hz

 Back-up power supply: 24V DC, 20A

 Power consumption: 340W

 Power connection: IEC power connector

 Dimensions:

394 x 480 x 145 mm (LxWxH)

19” x 3HE (LxH)

 Weight: 15 kg

Design and product specifications are subject to change without prior notice.

Website: www.Dap-audio.info

Email: service@highlite.nl

Page is loading ...

DAP Audio ZPA-6240TU User manual

Brand: DAP Audio

Model: ZPA-6240TU

Category: Serial switch boxes

Type: User manual

This manual is also suitable for

D6180

Download PDF

report

DAP Audio ZPA-6240TU User manual

This manual is also suitable for

DAP Audio ZPA-6240TU User manual

Related papers

Other documents