12
ENG
ENGLISH
USING THE REMOTE CONTROL
NOTE
the remote control to the indoor unit.
remote control.
or heat. If the infrared signal receiver on the indoor
may not function properly. use curtains to prevent
sunlight from receiving the receiver.
using the air-condition has fluorescent lighting
with electronic starters. if you are planning on
with local dealer.
1. Press and hold it for longer than 3
seconds.
display screen.
2. Press or to select the minutes.
3. Press to finish.
You can use the timer function to save energy and
to use the air conditioner more efficiently.
SETTING THE TIMER
SETTING THE CURRENT TIME
-
automatically.
-
automatically.
ADJUSTING THE AIR FLOW DIRECTION
NOTE
product failure.
operate with the previously set direction of air
displayed on the remote control. When this oc-
of the air flow again.
1. Press
display screen.
2. Press or to select the minutes.
3. Press to finish.
icon are displayed on the display screen indicat-
ing that the desired time is set.
TURNING OFF THE AIR CONDITIONER
AUTOMATICALLY AT A SET TIME
1. Press
display screen.
TURNING ON THE AIR CONDITIONER
AUTOMATICALLY AT A SET TIME
2. Press or to select the minutes.
3. Press to finish.
icon are displayed on the display screen indicat-
ing that the desired time is set.