Toro 50in Bagger, 2011 and After TimeCutter 5000 Series Riding Mower User guide

Toro
Brand
Toro
Model
50in Bagger, 2011 and After TimeCutter 5000 Series Riding Mower
Category
Lawnmowers
Type
User guide

This manual is also suitable for

FormNo.3368-344RevA
50inBagger
2011andAfterTimeCutter
®
Z5000Series
RidingMower
ModelNo.79335—SerialNo.311000001andUp
ToregisteryourproductordownloadanOperator'sManualorPartsCatalogatnocharge,gotowww.T oro.com.OriginalInstructions(EN)
Introduction
Readthisinformationcarefullytolearnhowtooperate
andmaintainyourproductproperlyandtoavoidinjury
andproductdamage.Youareresponsibleforoperating
theproductproperlyandsafely.
YoumaycontactTorodirectlyatwww .Toro.comfor
productandaccessoryinformation,helpndinga
dealer,ortoregisteryourproduct.
Wheneveryouneedservice,genuineToroparts,or
additionalinformation,contactanAuthorizedService
DealerorToroCustomerServiceandhavethemodel
andserialnumbersofyourproductready.
Figure1
identiesthelocationofthemodelandserialnumbers
ontheproduct.Writethenumbersinthespace
provided.
Figure1
1.Modelandserialnumberlocation
ModelNo.
SerialNo.
Thismanualidentiespotentialhazardsandhas
safetymessagesidentiedbythesafetyalertsymbol
(Figure2),whichsignalsahazardthatmaycauseserious
injuryordeathifyoudonotfollowtherecommended
precautions.
Figure2
1.Safetyalertsymbol
Thismanualuses2otherwordstohighlightinformation.
Importantcallsattentiontospecialmechanical
informationandNoteemphasizesgeneralinformation
worthyofspecialattention.
Contents
Introduction.................................................................2
Safety...........................................................................3
TowingSafety.......................................................3
SafetyandInstructionalDecals.............................4
Setup............................................................................5
1InstallingtheWeight..........................................6
2InstallingtheBaggerFrame................................8
3AssemblingtheBaggerTop................................9
4InstallingtheBaggerTop.................................10
5InstallingtheChute..........................................11
6ConnectingwiththeDischargeTube................12
Operation...................................................................13
EmptyingtheGrassBags....................................13
ClearingObstructionsfromtheBagger...............14
RemovingtheBagger.........................................14
OperatingTips...................................................14
Maintenance...............................................................16
RecommendedMaintenanceSchedule(s)................16
InspectingtheBaggerAttachment......................16
InspectingtheMowerBlades..............................16
CaringfortheGrassBags...................................17
CleaningtheBaggerAttachment.........................17
Storage.......................................................................17
StoringtheBaggerAttachment...........................17
©2010—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
2
Contactusatwww.Toro.com.
PrintedintheUSA.
AllRightsReserved
Safety
DANGER
Enginescanbecomehotwhentheyareoperating.
Severeburnscanoccurfromcontactinghot
surfaces.
Allowengines,especiallythemufer,tocoolbefore
touching.
DANGER
Debris,suchasleaves,grass,orbrushcancatch
re.Areintheengineareacancausepersonal
injuryandpropertydamage.
•Keeptheengineandmuferareafreeofdebris
accumulation.
•Takecarewhenopeningthebaggercoverto
keepdebrisfromfallingontotheengineand
muferarea.
•Allowthemachinetocoolbeforestoringit.
TowingSafety
•Donotattachtowedequipmentexceptatthehitch
point.
•Followtheattachmentmanufacturer’s
recommendationforweightlimitsfortowed
equipmentandtowingonslopes.
•Neverallowchildrenorothersinorontowed
equipment.
•Onslopes,theweightofthetowedequipmentmay
causelossoftractionandlossofcontrol.Reduce
towedweightandslowdown.
•Stoppingdistanceincreaseswiththeweightofthe
towedload.Travelslowlyandallowextradistance
tostop.
•Makewideturnstokeeptheattachmentclearofthe
machine.
•Donottowaloadthatweighsmorethanthetowing
machine.
3
SafetyandInstructionalDecals
Safetydecalsandinstructionsareeasilyvisibletotheoperatorandarelocatednearanyareaof
potentialdanger.Replaceanydecalthatisdamagedorlost.
109-6809
1.Crushinghazardofhand—donotremovethewholebaggerfromthemachine;openthebaggertopandthenremovethebag(s)
fromthebagger.Donotremovethebaggertopwhenitisclosed;openthebaggertopandthenremoveit.
109-7076
4
Setup
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
Bolt(3/8x1-1/4inches)
4
Locknut(3/8inch)
4
Weightmountingbracket,left
1
Weightmountingbracket,right1
Washers4
Weightholdingbracket1
Bolt(3/8x1inch)
2
Flatweight1
Suitcaseweight
1
1
Keyedcrossbar1
Installtheweight.
Baggerframesupportbracket
1
Supportspacerplate
1
Selftappingscrew(5/16x3/4inch)
2
Bolt(5/16x1inch)
2
Locknut(5/16inch)
4
Angledbracket1
Carriagebolt(5/16x3/4inch)
2
Baggerframe
1
Clevispin(1/2x2-1/4inch)
1
Hairpincotter
5
Rod2
2
Washer4
Installthebaggerframe.
Baggertop1
3
Baggerscreen1
Assemblethebaggertop.
GrassBag
2
4
Upperbaggertube1
Installthebaggertop.
5
Chute
1Installthechute.
6
Nopartsrequired
–
Connectwiththedischargetube.
5
1
InstallingtheWeight
Partsneededforthisprocedure:
4
Bolt(3/8x1-1/4inches)
4
Locknut(3/8inch)
1
Weightmountingbracket,left
1Weightmountingbracket,right
4Washers
1Weightholdingbracket
2
Bolt(3/8x1inch)
1Flatweight
1
Suitcaseweight
1Keyedcrossbar
Procedure
CAUTION
Thebaggerchangestheweightdistributionofthe
machine.Operatingthemachinewithoutthefront
weightsmaycauseanunstableconditionwhich
couldresultinalossofcontrol.
Ensurethefrontweightsareproperlyinstalled
beforeoperatingthemachinewiththebagger
attachment.
1.Locatetheforwardboltsontheundersideofthe
frame(Figure3andFigure4).Removethetwobolts
(3/8x1inch)andtwolocknuts(3/8inch).Retain
thelocknuts.
G014875
1
2
3
4
Figure3
1.Frontrightcaster(castor
forkandwheelnotshown
forclarity)
3.Bolt(3/8x1inch)
2.Forwardhole,rightside
4.Locknut(3/8inch)
G014877
1
2
3
4
Figure4
1.Locknut(3/8inch)3.Frontleftcaster(castor
forkandwheelnotshown
forclarity)
2.Forwardhole,leftside4.Bolt(3/8x1inch)
2.Locatetheleftandrightweightmountingbrackets
inlooseparts.Startbyinstallingtheleftbracketto
theundersideoftheframe.
3.Securethebrackettotheframeusingtwobolts(3/8
x1-1/4inches),twowashersandtwolocknuts(3/8
inch)(
Figure5).Onelocknutisfromloosepartsand
theotherisreusedfromearlierremoval.
6
G014878
1
2
3
4
5
6
7
8
Figure5
1.Locknut(3/8inch),existing5.Hole,existinginframe
2.Forwardhole,leftside
6.Washer
3.Frontleftcaster(castor
forkandwheelnotshown
forclarity)
7.Bolt(3/8x1-1/4inches)
4.Locknut(3/8inch),loose
parts
8.Leftmountingbracket
4.Ontherightsideofthemachineinstalltheright
weightmountingbracket.
•Formachineswithoutafootassistliftpedal:
securethebracketusingtwobolts(3/8x1-1/4
inches),twowashersandtwolocknuts(3/8
inch)(
Figure6).Onelocknutisfromlooseparts
andtheotherisreusedfromearlierremoval.
G014876
1
2
3
4
5
6
7
8
Figure6
1.Frontrightcaster(castor
forkandwheelnotshown
forclarity)
5.Bolt(3/8x1-1/4inches)
2.Forwardhole,rightside6.Washer
3.Locknut(3/8inch),existing7.Hole,existinginframe
4.Rightmountingbracket
8.Locknut(3/8inch),loose
parts
•Formachineswithafootassistliftpedal:The
washerswillnotbeneeded.Instead,remove
theforwardfastenersinthefootassistliftpedal
bracket.Securethebracketusingtwoboltsand
twolocknuts(
Figure7).Onelocknutisfrom
loosepartsandtheotherisreusedfromearlier
removal.
G014883
1
2
3
4
5
6
7
8
Figure7
1.Frontrightcaster(castor
forkandwheelnotshown
forclarity)
5.Bolt(3/8x1-1/4inches)
2.Forwardhole,rightside
6.Footassistliftpedal
bracket
3.Locknut(3/8inch),existing
7.Hole,existinginbracket
4.Rightmountingbracket
8.Locknut(3/8inch),loose
parts
5.Installtheweightholdingbrackettothemounting
brackets(Figure8).Aligntheoutboardholesin
thebracketwiththemountingbracketsinstalled
previously.Makesurethebracketiscenteredonthe
frame.Securewithtwobolts(3/8x1inch)andtwo
locknuts(3/8inch).
G014879
1
2
3
4
5
Figure8
1.Locknut(3/8inch)4.Bolt(3/8x1inch)
2.Weightholdingbracket5.Rightmountingbracket
3.Leftmountingbracket
7
6.Installaatweighttotheholdingbracketandmove
itrearward,ushwiththebracket(Figure9).
G014880
1
2
3
Figure9
1.Keyedcrossbar
3.Suitcaseweight
2.Flatweight
7.Installasuitcaseweightinfrontoftheatweight
(Figure9).
8.Securetheweightstothebracketwithakeyedcross
bar(
Figure9).Installthebarandrotateit90degrees
downwardtolockitinplace.
9.Onceallweightsandbracketshavebeeninstalled,go
backandcheckthatallfastenersaretight.Tighten
asnecessary.
Important:Wheneveryouremovethebagger
attachment,remembertoremovethefrontweights
toreturntheproperstabilitytothemachine.
2
InstallingtheBaggerFrame
Partsneededforthisprocedure:
1
Baggerframesupportbracket
1
Supportspacerplate
2
Selftappingscrew(5/16x3/4inch)
2
Bolt(5/16x1inch)
4
Locknut(5/16inch)
1Angledbracket
2
Carriagebolt(5/16x3/4inch)
1
Baggerframe
1
Clevispin(1/2x2-1/4inch)
5
Hairpincotter
2Rod
4Washer
Procedure
1.Locatethebaggerframesupportspacerplateand
bracketinlooseparts.Installtheplateandbracketto
themachineframeasshowninFigure10.Securethe
plateandbrackettotheframeusingtwobolts(5/16
x1inch)andtwolocknuts(5/16inch).
G014881
1
2
3
4
5
6
Figure10
1.Machineframe4.Bolt(5/16x2-1/2inch)
2.Supportspacerplate
5.Drawbarhole
3.Supportbracket6.Locknut(5/16inch)
2.Securethesupportbrackettothebottomofthe
machineframefrombelowusingtwoselftapping
screws(5/16x3/4inch)asshowninFigure11.
8
1
2
G010578
Figure11
1.Supportbracket2.Selftappingscrews(5/16
x3/4inch)
3.Installtheangledbaggerbrackettotheengineguard
usingtwocarriagebolts(5/16x3/4inch)andtwo
locknuts(5/16inch).
G014882
1
2
3
4
Figure12
1.Carriagebolt(5/16x3/4
inch)
3.Locknut(5/16inch)
2.Angledbracket4.Holeinengineguard,
existing
4.Installthebaggerframetothesupportbracket.
Securethebaggerframewithaclevispin(1/2x
2-1/4inch)andhairpincotter(
Figure12).
G014884
1
2
3
4
5
Figure13
1.Baggerframe(60inch
decks)
4.Hairpin
2.Clevispin(1/2x2-1/4
inch)
5.Anglebracket
3.Supportbracket,receiver
5.Installtwosupportrods,onetoeachsideofthe
baggerframe.Locatetheexistingkeyedslotinthe
machineframeandinstallthebent,aredendofthe
rodintothatslot(Figure14).Movetherodrearward
toseatitintheframe.
G014885
1
2
3
4
5
6
Figure14
Leftsideshown
1.Washer
4.Supportrod
2.Hairpin5.Keyedslot,existing
3.Bracketframehole6.Bent,aredendofsupport
rod
6.Insertthebentendsoftherodintothebaggerframe
asshowninFigure14.Securetheendoftherod
withawasherandhairpin.
9
3
AssemblingtheBaggerTop
Partsneededforthisprocedure:
1Baggertop
1Baggerscreen
Procedure
Turnthebaggertopover.Installthescreenasshown
in
Figure15soitslopesdowntowardthecollection
bags.Makesurethescreenssnapintoplaceandthetabs
engagethebaggertop.
G005666
1
2
3
4
Figure15
1.Baggertop
3.Screentab
2.Screen4.Slotinbaggertop
4
InstallingtheBaggerTop
Partsneededforthisprocedure:
2
GrassBag
1Upperbaggertube
Procedure
1.Installthebaggertoptothebaggerframe.Rotate
thebaggertoptoalignthekeyholesinthebagger
topbracketswiththekeysinthepostsonthebagger
frame(
Figure16).Slidethebracketsovertheposts
androtatethebaggertopdowntotheoperating
position.
Note:Thebaggertopiseasiertoinstalliftwo
peopleworktogether.
G014888
1
2
3
4
5
6
Figure16
1.Baggertop4.Bracket,baggertop
2.Baggerframe
5.Key
3.Keyhole6.Post
10
2.Liftthebaggertopandinstallthebagsbysliding
thebagframehooksontotheretainingbrackets
(Figure17).
G005672
1
2
3
4
Figure17
1.Bag3.Retainingbracket
2.Baggerframe4.Bagframehook
3.Lowerthebaggertopontothebag(Figure18).
G005757
Figure18
4.Installtheupperbaggertube.Insertthecurvedend
intotheopeninginthebaggertop.Makesurethe
aredendwiththeretentionpostispointingdown
andfrowardinpreparationtobematedwiththe
FinishingKit.
5
InstallingtheChute
Partsneededforthisprocedure:
1
Chute
Procedure
1.Anglethemetaltabatthefrontofthechuteintothe
slotinthebracketweldedtothemowerdeckjustin
frontofthecutoff(
Figure19).
G015203
1
2
3
Figure19
1.Chute4.Deectorrod
2.Lockingpin5.Flexiblelatch
3.Rearhook6.Notchedbracket
2.Pivotthechutebackandtowardthedecksochuteis
ushwiththemowerdeck(Figure20).
11
G015204
Figure20
Note:Asthechutemateswiththedeck,makesure
theedgeofthechuteisunderthelipoftheclip
assemblyinstalledpreviously.
3.Onthetopofthechute,engagethehookshaped
latcharoundpivotrodofthedeectorassemblyas
shownin(
Figure21).
G005850
1
2
3
4
Figure21
1.Chute
3.Latch,hook
2.Deector
4.Pivotrod
4.Securethechutetothe50inchdeck.Hookthe
exiblelatchonthechutetotheretainingclasp
weldedonthemowerdecktotherearoftheopening
(Figure22).
G005756
1
2
3
Figure22
1.Chute
3.Retainingclasp
2.Flexiblelatch
6
ConnectingwiththeDischarge
Tube
NoPartsRequired
Procedure
1.Slidethecurvedendofthedischargetubeintothe
openinginthebaggertop(Figure23).
12
G010641
1
2
3
4
5
Figure23
1.Dischargetube,curved
end
4.Peg
2.Openinginbaggertop
5.Rubberstrap
3.Dischargetube,aredend
2.Slidethearedendofthedischargetubeoverthe
endofthechute.Movetherubberretainingstrapon
thechutesnapsoverthepegonthedischargetube
tosecureit(Figure23).
Operation
Note:Determinetheleftandrightsidesofthe
machinefromthenormaloperatingposition.
WARNING
Toavoidpersonalinjury,followtheseprocedures:
•Becomefamiliarwithalloperatingandsafety
instructionsinthe
Operator’ s Man ual
forthe
mowerbeforeusingthisattachment.
•Neverremovethedischargetube,bags,bagger
top,orthechutewhiletheengineisrunning.
•Alwaysshuttheengineoffandwaitforall
movingpartstostopbeforeclearingan
obstructionfromthebaggingsystem.
•Neverdomaintenanceorrepairswhilethe
engineisrunning.
EmptyingtheGrassBags
Becarefulwhenliftingorhandlingagrassbagthatis
full.Toemptythegrassbags:
1.Parkthemachineonalevelsurfaceanddisengage
thebladecontrolswitch.
2.Movethemotioncontrolleversoutwardtothe
neutrallockposition,stoptheengine,removethe
key,settheparkingbrakeandwaitforallmoving
partstostopbeforeleavingtheoperatingposition.
3.Open(raise)thebaggertop(
Figure24).
G005758
Figure24
4.Compressdebrisintothebags.Withbothhands,
liftuponthebagandunhookitfromtheretaining
bracket.Emptythebag.Repeattheprocedurefor
theotherbag.
5.Installthebagsbyslidingthebagframehooksonto
theretainingbrackets(Figure25).
13
G005672
1
2
3
4
Figure25
1.Bag3.Retainingbracket
2.Baggerframe4.Bagframehook
6.Lowerthebaggertopontothebags.
ClearingObstructionsfrom
theBagger
1.Parkthemachineonalevelsurfaceanddisengage
thebladecontrolswitch.
2.Movethemotioncontrolleversoutwardtothe
neutrallockposition,stoptheengine,removethe
key,settheparkingbrakeandwaitforallmoving
partstostopbeforeleavingtheoperatingposition.
3.Checkthegrassbagsandemptythemiftheyarefull.
4.Removeandseparatethedischargetubeandchute
fromthebaggertopandmower.Usingastick
orsimilarobject,carefullyremoveandclearthe
obstructionfromthemower,dischargetube,chute,
andthebaggertop.
5.Afteryouremovetheobstruction,installthe
completebaggersystemandresumeoperation.
RemovingtheBagger
CAUTION
Failingtoremovethefrontbaggerweights
andoperatingthemachinewithoutthebagger
attachmentmaycauseanunstableconditionwhich
couldresultinalossofcontrol.
•Alwaysremovethefrontweightswhen
removingthebaggerattachment.
•Neveroperatethemachinewithoutthebagger
attachmentandthefrontweightsstillinstalled.
ThebaggercanberemovedbyrepeatingtheSetup
sectionsfromallinstalledbaggerrelatedkitsinreverse
order.Ifweightsareinstalled,alwaysremovethefront
baggerweightswhenremovingthebaggerattachments.
Note:Itisonlynecessarytoremovethecutoffbafe
wheninstallingamulchingkit.
OperatingTips
TipsforBagging
Size
Rememberthatthemowerislongerandwiderwiththis
attachmentinstalled.Byturningtoosharplyinconned
placesyoumaydamagetheattachment.
Trimming
Alwaystrimwiththeleftsideofthemower.Donot
trimwiththerightsideofthemowerbecauseyoucould
damagethebagger’schuteanddischargetube.
CuttingHeight
Donotsetthemowercuttingheighttoolowbecause
longgrasssurroundingthemowercanpreventairfrom
gettingunderthemowerandenteringthebagging
system.Ifenoughairdoesn’tgetunderthemower,the
baggingsystemwillplug.
CuttingFrequency
Cutthegrassoften,especiallywhenitgrowsrapidly.
Youwillhavetocutyourgrasstwiceifitgetsexcessively
long.
CuttingTechnique
Forbestlawnappearance,besuretoslightlyoverlap
themowerintothepreviouslycutarea.Thishelps
14
reducetheloadontheengineandreducesthechance
ofpluggingthechuteanddischargetube.
BaggingSpeed
Mostoftenyouwillbagwiththemowerthrottlein
theFastpositionanddriveatanormalgroundspeed.
However,inextremelydryanddustygrass,youmay
wanttoslightlyreducethethrottlespeedandincrease
thegroundspeedofthemower.Thebaggingsystem
mayplugifyoudrivetoofastandtheenginespeed
getstooslow.Onhillsitmaybenecessarytoslowthe
mowergroundspeed.Thishelpsmaintaintheengine
speedandbaggingefciency.Mowdownhillwhenever
possible.
CAUTION
Asthebaggerlls,extraweightisaddedtothe
backofthemachine.Ifyoustopandstartsuddenly
onhills,youmaylosesteeringcontrolorthe
machinemaytip.
•Donotstartorstopsuddenlywhengoinguphill
ordownhill.Avoiduphillstarts.
•Ifyoudostopthemachinewhengoinguphill,
disengagethebladecontrol.Thenbackdown
thehillusingaslowspeed.
•Donotchangespeedsorstoponslopes.
•Neveroperatethemachinewithoutthebagger
attachmentandthefrontweightsstillinstalled.
BaggingLongGrass
BaggingLongGrassExcessivelylonggrassisheavyand
maynotbepropelledcompletelyintothegrassbags.If
thishappens,thedischargetubeandchutemayplug.
Toavoidpluggingthebaggingsystem,mowthegrass
atahighheightofcut,thenlowerthemowertoyour
normalcuttingheightandrepeatthebaggingprocess.
BaggingWetGrass
Alwaystrytocutgrasswhenitisdrybecauseyour
lawnwillhaveaneatappearance.Ifyoumustcutwet
grass,usetheconventionalsidedischargefeatureofthe
mower.Severalhourslater,whentheclippingsaredry,
installthecompletebaggerattachmentandvacuumup
thegrassclippings.
SignsofPlugging
Asyouarebagging,asmallamountofgrassclippings
normallyblowoutthefrontofthemower.Anexcessive
amountofclippingsblowingoutindicatesthatthebags
arefullorthesystemisplugged.
15
Maintenance
Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
RecommendedMaintenanceSchedule(s)
MaintenanceService
Interval
MaintenanceProcedure
Aftertherst10hours
•Inspectthebagger
Beforeeachuseordaily
•Cleanthebagger
Beforestorage
•Inspectthebagger
•Cleanthebagger
CAUTION
Ifyouleavethekeyintheignitionswitch,someonecouldaccidentlystarttheengineandseriouslyinjure
youorotherbystanders.
Removethekeyfromtheignitionanddisconnectthewirefromthesparkplugbeforeyoudoany
maintenance.Setthewireasidesothatitdoesnotaccidentallycontactthesparkplug.
DANGER
Enginescanbecomehotwhentheyareoperating.Severeburnscanoccurfromcontactinghotsurfaces.
Allowengines,especiallythemufer,tocoolbeforetouching.
DANGER
Debris,suchasleaves,grass,orbrushcancatchre.Areintheengineareacancausepersonalinjury
andpropertydamage.
•Keeptheengineandmuferareafreeofdebrisaccumulation.
•Takecarewhenopeningthebaggercovertokeepdebrisfromfallingontotheengineandmuferarea.
•Allowthemachinetocoolbeforestoringit.
InspectingtheBagger
Attachment
ServiceInterval:Aftertherst10hours
Beforestorage
Inspectthebaggerattachmentaftertherst10hoursof
operation,andmonthlythereafter.
1.Checkthechute,dischargetube,andthebaggertop.
Replacethesepartsiftheyarecrackedorbroken.
2.Tightenallnuts,bolts,andscrews.
3.Inspectallfastenersandlatches;replaceanymissing
ordamaged.
4.Inspectthegrassbagsfordeterioration.
WARNING
Youorbystanderscouldbeseverelyinjuredby
yingdebrisorthrownobjectsthatmaypass
throughtorn,worn,ordeterioratedgrassbags.
•Checkthegrassbagsforholes,rips,wear,
andotherdeterioration.
•Donotwashthegrassbags.
•Ifthebaghasdeteriorated,installnewgrass
bagssuppliedbythemanufacturerofthis
baggerattachment.
InspectingtheMowerBlades
Inspectthemowerbladesregularlyandwhenevera
bladestrikesaforeignobject.
16
Ifthebladesarebadlywornordamaged,installnew
blades.RefertoyourmowerormowerOperator’sManual
forcompleteblademaintenance.
CaringfortheGrassBags
Washingthegrassbagsisnotrecommended.
Topreventrapiddeteriorationofthebagmaterial,store
thebagswheretheywilldrycompletelyaftereachuse.
CleaningtheBagger
Attachment
ServiceInterval:Beforeeachuseordaily
Beforestorage
1.Aftereachuse,removeandwashtheinsideand
outsideofthebaggertop,dischargetube,chute,and
theundersideofthemower,usingwatersprayed
fromagardenhose.Useamilddetergenttoremove
stubborndirt.
2.Makesureyouremovemattedgrassfromallparts.
3.Flushthegrassbagswithwaterusinggardenhoseto
removeanydebris.
4.Afterwashing,letallofthepartsdrythoroughly.
Storage
StoringtheBaggerAttachment
1.Cleanthebaggerattachment;refertoCleaningthe
BaggerAttachment.
2.Inspectthebaggerattachmentfordamage;referto
InspectingtheBaggerAttachment.
3.Makesurethegrassbagsareemptyandthoroughly
dry.
4.Storethebaggerinaclean,dryplace,outofdirect
sunlight.Thisprotectstheplasticpartsandextends
thelifeofthebagger.Ifyoumuststorethebagger
outside,coveritwithaweatherproofcover.
17
Notes:
18
Notes:
19
TimeCutter
TheToroTotalCoverageWarranty
and
TITAN
Mowers
LimitedWarranty(seewarrantyperiodsbelow)
ConditionsandProductsCovered
TheToroCompanyanditsafliate,T oroWarrantyCompany,pursuantto
anagreementbetweenthem,jointlypromisetotheoriginalpurchaser
torepairtheToroProductslistedbelowifdefectiveinmaterialsor
workmanship.
Thefollowingtimeperiodsapplyfromthedateofpurchasebytheoriginal
owner:
ProductsWarrantyPeriod
AllMowers
•Engine
Seeenginemanufacturer’swarranty
1
•Battery1–90daysPartsandLabor
91–365daysPartsonly
•BeltsandTires90days
TimeCutterZMowersand
Attachments
30DaysCommercialUse
3yearsResidentialUse
2
TITANMowersandAttachments3yearsor240hours
3
•Frame
Lifetime(originalowneronly)
4
TITANMXMowersandAttachments3yearsor400hours
3
•Frame
Lifetime(originalowneronly)
4
1
SomeenginesusedonToroProductsarewarrantedbytheenginemanufacturer.
2
Residentialusemeansuseoftheproductonthesamelotasyourhome.Useatmorethanone
locationisconsideredcommercialuseandthecommercialusewarrantywouldapply.
3
Whicheveroccursrst.
4
LifetimeFrameWarranty-Ifthemainframe,consistingofthepartsweldedtogethertoformthe
tractorstructurethatothercomponentssuchastheenginearesecuredto,cracksorbreaksin
normaluse,itwillberepairedorreplaced,atT oro’soption,underwarrantyatnocostforparts
andlabor.Framefailureduetomisuseorabuseandfailureorrepairrequiredduetorustor
corrosionarenotcovered.
Thiswarrantyincludesthecostofpartsandlabor,butyoumustpay
transportationcosts.
Warrantymaybedeniedifthehourmeterisdisconnected,altered,or
showssignsofbeingtamperedwith.
OwnerResponsibilities
YoumustmaintainyourToroProductbyfollowingthemaintenance
proceduresdescribedintheOperator’sManual.Suchroutine
maintenance,whetherperformedbyadealerorbyyou,isatyourexpense.
InstructionsforObtainingWarrantyService
IfyouthinkthatyourToroProductcontainsadefectinmaterialsor
workmanship,followthisprocedure:
1.ContactanyAuthorizedT oroServiceDealertoarrangeserviceattheir
dealership.T olocateadealerconvenienttoyou,refertotheYellow
Pagesofyourtelephonedirectory(lookunder“LawnMowers”)or
accessourwebsiteatwww.T oro.com.Y oumayalsocallthenumbers
listedinitem#3tousethe24-hourToroDealerlocatorsystem.
2.Bringtheproductandyourproofofpurchase(salesreceipt)tothe
ServiceDealer.Thedealerwilldiagnosetheproblemanddetermine
ifitiscoveredunderwarranty.
3.IfforanyreasonyouaredissatisedwiththeServiceDealer’s
analysisorwiththeassistanceprovided,contactusat:
CustomerCareDepartment,RLCDivision
ToroWarrantyCompany
8111LyndaleAvenueSouth
Bloomington,MN55420-1196
Tollfreeat866-216-6029(U.S.customers)
Tollfreeat866-216-6030(Canadiancustomers)
ItemsandConditionsNotCovered
Thereisnootherexpresswarrantyexceptforspecialemissionsystem
coverageandenginewarrantycoverageonsomeproducts.Thisexpress
warrantydoesnotcoverthefollowing:
•Costofregularmaintenanceserviceorparts,suchaslters,fuel,
lubricants,oilchanges,sparkplugs,airlters,bladesharpening/worn
bladeonmowers,cable/linkageadjustments,orbrakeandclutch
adjustments
•Componentsfailingduetonormalweararenotcoveredbythis
warranty
•Anyproductorpartwhichhasbeenalteredormisusedandrequires
replacementorrepairduetoaccidentsorlackofpropermaintenance
•Repairsnecessaryduetoimproperbatterycare,failuretousefresh
fuel(lessthanonemonthold),orfailuretoproperlypreparetheunit
priortoanyperiodofnon-useoveronemonth
•Pickupanddeliverycharges
•Operationalmisuse,neglect,oraccidents
•RepairsorattemptedrepairsbyanyoneotherthananAuthorized
ToroServiceDealer
GeneralConditions
Allrepairscoveredbythesewarrantiesmustbeperformedbyan
AuthorizedT oroServiceDealerusingT oroapprovedreplacementparts.
NeitherTheToroCompanynorToroWarrantyCompanyisliablefor
indirect,incidentalorconsequentialdamagesinconnectionwiththe
useoftheToroProductscoveredbythiswarranty,includingany
costorexpenseofprovidingsubstituteequipmentorserviceduring
reasonableperiodsofmalfunctionornon-usependingcompletion
ofrepairsunderthiswarranty.
Allimpliedwarrantiesofmerchantability(thattheproductistfor
ordinaryuse)andtnessforuse(thattheproductistforaparticular
purpose)arelimitedtothedurationoftheexpresswarranty
Somestatesdonotallowexclusionsofincidentalorconsequential
damages,orlimitationsonhowlonganimpliedwarrantylasts,so
theaboveexclusionsandlimitationsmaynotapplytoyou.
Thiswarrantygivesyouspeciclegalrights,andyoumayalsohaveother
rightswhichvaryfromstatetostate.
CountriesOtherthantheUnitedStatesorCanada
CustomerswhohavepurchasedToroproductsoutsidetheUnitedStatesorCanadashouldcontacttheirT oroDistributor(Dealer)toobtainguarantee
policiesforyourcountry,province,orstate.IfforanyreasonyouaredissatisedwithyourDistributor’sserviceorhavedifcultyobtainingguarantee
information,contacttheToroimporter.Ifallotherremediesfail,youmaycontactusatT oroWarrantyCompany.
374-0258RevB
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Toro 50in Bagger, 2011 and After TimeCutter 5000 Series Riding Mower User guide

Toro
Brand
Toro
Model
50in Bagger, 2011 and After TimeCutter 5000 Series Riding Mower
Category
Lawnmowers
Type
User guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers