TV FUNCTIONS (continued)
General Operation (continued)
2.To select a channel
2 0-0
Press the CH + button to choose higher-numbered channels and
the CH- button to choose lower-numbered channels,
Using the Channel Number buttons
• To select a one -digit channel number
Press the 0 button, then press another Channel Number button
(except 100+)to select a desired number,
• To select a two -digit channel number
Enter a first-digit, then second-digit,
• To select channel number between 100 and 125 in the Cable
mode
Press the 100+ button so that "1_ _" appears on the screen,
then enter the next digit one and two,
Press the RECALL button and the TV will directly skip back to
the previous channel,
0_I 9
,--Io o
Press the SCAN button repeatedly so that "Scan On "appear on the screen and the TV
begins to scan from the current channel,
During scanning, pressing any button can interrupt scanning,
3. CCD/Text switch
(_ Press thelCC]button to display the current Closed Captions/Text mode on the screen,
Press the button again to turn off CCD/-rext,
4. TVNideo selection
Press the VIDEO button, and the screen display changes in circular way:
_.-Channel Number _ Videol(S-VHS1) -_.-Video2
To receive signals from external equipment, please be sure to select a corresponding Video
mode,
In the Video mode, pressing any of the RECALL, CH-/+ buttons can return to the TV mode,
5. On-screen display
Press the DISPLAY button repeatedly in the TV or Video mode to display the current mode on the
screen and turn off the display respectively,
With other OSD, pressing the DISPLAY button first can turn it off,
6. Stereo selection
In the TV mode, the TV can automaticatly
identify MTS stereo modes among Mono,
Stereo,Stereo/SAP and Mono/SAP,
When receiving signals from external equ-
ipment in the Video mode, the TV identifies
automatically external signals to Stereo,
Press the STEREO button to set input so Stereo, L or R,
Signal Received Press STEREO button
Mono Mono
Stereo Stereo,Mono
Stereo/SAP Stereo,SAP, Mono
Mono/SAP Mono, SAP
18