LG 37LK450 Owner's manual

OWNER’S MANUAL

Please read this manual carefully before operating the

set and retain it for future reference.

www.lg.com

22LV2500

26LV2500

32LV3500

37LV3500

22LV5500

26LV5500

32LK450

37LK450

LCD TV

ENG

ENGLISH

LICENSES

ENG

ENGLISH

LICENSES

Supported licenses may differ by model. For more information about licenses, visit

www.lg.com.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D

symbol are trademarks of Dolby Laboratories.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or

registered trademarks of HDMI Licensing LLC.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This

is an official DivX Certified® device that plays DivX video. Visit www.divx.com for

more information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered

in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your

registration code, locate the DivX VOD section in your device setup menu. Go to

vod.divx.com for more information on how to complete your registration.

“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”

DivX®, DivX Certified® and associated logos are trademarks of DivX, Inc. and are

used under license.

Covered by one or more of the following U.S. patents :

7,295,673; 7,460,668; 7,515,710; 7,519,274

2

ENG

ENGLISH

ENG

ENGLISH

LICENSES

4 ASSEMBLING AND PREPARING

4

Unpacking

6

Parts and buttons

Lifting and moving the TV

11

12

11

Setting up the TV

13

Mounting on a table

13

Swivel stand

14

15

Careful installation advice

Kensington security system

Tidying cables

16 REMOTE CONTROL

17

WATCHING TV

17

Connecting an antenna

17

Turning the TV on for the first time

17

Watching TV

18

20

28

23

24

26

27

24

25

26

30

31

33

Managing programmes

EPG(Electronic Programme Guide) (In di-

gital mode)

Using additional options

Using the quick menu

- Connecting USB storage devices

34

- Browsing files

35

- Viewing movies

38

- Viewing photos

40

- Listening to music

42

43

CUSTOMIZING TV SETTINGS

56

MAKING CONNECTIONS

TELETEXT

43

56

57

Accessing main menus

MAKING CONNECTIONS

External Equipment Setup

61

SIMPLINK connection

61

- Screen and frame

- Cabinet and stand

- Power cord

65

Cleaning your TV

Preventing “Image burn” or “Burn-in” on

your TV screen

65

66

44

Customizing settings

44

- SETUP settings

45

- PICTURE settings

49

- AUDIO settings

53

54

- LOCK settings

- OPTION settings

- Activating the SIMPLINK feature

52

- TIME settings

33

ENTERTAINMENT

65

62

67

MAINTENANCE

TROUBLESHOOTING

69

SPECIFICATIONS

72

APPENDIX

- Automatically setting up programme

- Manually setting up programme (In digi-

tal mode)

19

- Manually setting up programme (In ana-

logue mode)

31

- Testing Software Update

32

- Testing the Picture / Sound

32

- Using Signal Test

32

- Using the product or service information

- Using the input list

29

- Locking the buttons on the TV (Child Lo-

ck)

- Editing your programme list

- Selecting the programme list

Connection of TV

Not using the Dest-type Stand

Wall mount:horizontal installation

TABLE OF CONTENTS

2

- Select a programme

- NOW/NEXT Guide Mode

- 8 Day Guide Mode

- Extended Description Box

- Adjusting aspect ratio

- Changing AV modes

- Date Change Mode

- DivX registration code

Using the customer supprot

TABLE OF CONTENTS

3

ENG

ENGLISH

ENG

ENGLISH

Polishing cloth

Power Cord (

This item is not

included for all models.)

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local

dealer where you purchased your product. The illustrations in this manual may differ from the actual product

and item.

Only 32/37LV3500

Screw for assembly

Cable Holder

(M4x12)

x 8

Screw for fixing

(M4x20)

x 8

Only 32/37LK450

Screw for assembly Screw for fixing

Protection cover

Only 22/26LV250022/26LV5500

Screw for assembly

or

Cable Holder

DC Adapter

(M4x16)

x 2

ASSEMBLING AND PREPARING

Remote control and batteries(AAA) Owner’s Manual & Card

4

ENG

ENGLISH

ENG

ENGLISH



Do not use any pirated items to ensure

the safety and product life span.



Any damages or injuries by using pirated

items are not covered by the warranty.

CAUTION

Optional Extras

Optional extras can be changed or modified for

quality improvement without any notification.

Contact your dealer for buying these items.

Wall Mounting Bracket

Model

22LV2500

26LV2500

22LV5500

26LV5500

32LK450

32LV3500

VESA (A x B)

100 x 100 200 x 100

Standard screw

M4 M4

Number of screws

4 4

Wall mount bracket

(optional)

LSW100B, LSW100BG

Model

37LK450

37LV3500

VESA (A x B)

200 x 200

Standard screw

M6

Number of screws

4

Wall mount bracket

(optional)

LSW200B,

LSW200BG



The items supplied with your product may

vary depending on the model.



Product specifications or contents of this

manual may be changed without prior

notice due to upgrade of product functions.

NOTE

 For an optimal connection, HDMI cables

and USB devices should have bezels less

than 10 mm thick and 18 mm width.

*A 10 mm

*B

18 mm

ASSEMBLING AND PREPARING

5

ENG

ENGLISH

ENG

ENGLISH

Parts and buttons

y TV can be placed in standby mode in order to reduce the power consumption. And TV should be

turned off if it will not be watched for some time, as this will reduce energy consumption.

y The energy consumed during use can be significantly reduced if the level of brightness of the

picture is reduced, and this will reduce the overall running cost.

NOTE

y

Do not step on the glass stand or subject it to any impact. It may break, causing possible injury

from fragments of glass, or the TV may fall.

y

Do not drag the TV. The floor or the product may be damaged.

CAUTION

ASSEMBLING AND PREPARING

6

ENG

ENGLISH

ENG

ENGLISH

(Only 22/26LV2500)

Turns the power on or off

INPUT

Changes the input source

HOME

Accesses the Home menu, or saves your input and exits the menus.

OK

Selects the highlighted menu option or confirms an input

Adjusts the volume level

P

Scrolls through the saved programmes

Rear Connection panel

FRONT PANEL

BACK PANEL

( You can set the Power indicator to

on or off by selecting OPTION in

the Home menu - SETUP. )

Touch buttons

(All of the buttons are touch sensitive

and can be operated through simple

touch with your finger.)

Speakers

Remote control

Power indicator

Screen

y

Image shown may differ from your TV.

Touch button Description

ASSEMBLING AND PREPARING

V

+

/I

7

ENG

ENGLISH

ENG

ENGLISH

(Only 32/37LV3500)

Turns the power on or off

INPUT

Changes the input source

HOME

Accesses the Home menu, or saves your input and exits the menus.

OK

Selects the highlighted menu option or confirms an input

Adjusts the volume level

P

Scrolls through the saved programmes

Rear Connection panel

FRONT PANEL

BACK PANEL

( You can set the Power indicator to

on or off by selecting OPTION in

the Home menu - SETUP. )

Touch buttons

(All of the buttons are touch sensitive

and can be operated through simple

touch with your finger.)

Speakers

Remote control

Power indicator

Screen

Touch button Description



Image shown may differ from your TV.

ASSEMBLING AND PREPARING

2

1

V

+

/I

8

ENG

ENGLISH

ENG

ENGLISH

(Only 22/26LV5500)

Turns the power on or off

INPUT

Changes the input source

HOME

Accesses the Home menu, or saves your input and exits the menus.

OK

Selects the highlighted menu option or confirms an input

Adjusts the volume level

P

Scrolls through the saved programmes

Rear Connection panel

FRONT PANEL

BACK PANEL

( You can set the Power indicator to

on or off by selecting OPTION in

the Home menu - SETUP. )

Touch buttons

(All of the buttons are touch sensitive

and can be operated through simple

touch with your finger.)

Speakers

Remote control

Power indicator

Screen



Image shown may differ from your TV.

IN1

RGB IN(PC)

OPTICAL

DIGITAL

AUDIO OUT

DC-IN

(RGB/DVI)

AUDIO IN

ANTENNA IN

CABEL IN

Manufactured under

license from Dolby

Laboratories.

“Dolby” and the double-D

symbol are trademarks

of Dolby Laboratories.

/DVI IN

USB IN

2

1

Touch button Description

ASSEMBLING AND PREPARING

V

H

9

ENG

ENGLISH

ENG

ENGLISH

(OnlyLK450)

Touch button Description

Turns the power on or off

INPUT

Changes the input source

HOME

Accesses the Home menu, or saves your input and exits the menus.

OK

Selects the highlighted menu option or confirms an input

Adjusts the volume level

P

Scrolls through the saved programmes

FRONT PANEL

BACK PANEL

( You can set the Power indicator to

on or off by selecting OPTION in

the Home menu - SETUP. )

Touch buttons

(All of the buttons are touch sensitive

and can be operated through simple

touch with your finger.)

Speakers

Remote control

Power indicator

Screen

USB IN IN3

RGB IN (PC)

AUDIO IN

(RGB/DVI)

Manufactured under license

from Dolby Laboratories.

“Dolby” and the double-Dsymbol are

trademarks of Dolby Laboratories.

COMPONENT IN

ANTENNA

IN

CABEL

IN

OPTICAL

DIGITAL

AUDIO OUT

/DVI IN

2

1

Rear Connection panel

AV IN 2

1



Image shown may differ from your TV.

ASSEMBLING AND PREPARING

2

1

V

+

/I

10

ENG

ENGLISH

ENG

ENGLISH

When moving or lifting the

TV, read the following to

prevent the TV from being scratched or damaged

and for save transportation regardless of its type

and size.

y

It is recommended to move the TV in the box

or packing material that the TV originally came

in.

y

Before moving or lifting the TV, disconnect the

power cord and all cables.

y

When holding the TV, the screen should face

away from you to prevent the screen from

scratches.

y

Hold the top and bottom of the TV frame firmly.

Make sure not to hold the transparent part,

speaker, or speaker grill area.

y

When transporting a large TV, there should be

2 or 3 people.

y

When transporting the TV by hand, hold the

TV as shown in the following illustration.

y

When transporting the TV, do not expose the

TV to jolts or excessive vibration.

y

When transporting the TV, keep the TV

upright, never turn the TV on its side or tilt

towards the left or right.

y

Avoid touching the screen at all times, as

this may result in damage on the screen

or some of the pixels used to create

images.

CAUTION

y

Image shown may differ from your TV.

Put your TV on a pedestal stand and mount the TV

on a table or wall.

Attaching the stand

(

(Only 22/26LV250022/22LV5500)

1

Lay the TV with the screen side down on a flat

surface.

y

Lay a foam mat or soft protective cloth

on the surface to protect the screen from

damage.

CAUTION

2

Assemble the parts of the

Stand Body

with the

Stand Base

of the TV.

3 Secure the TV and the stand with the 2 screws.

(M4x16)

Lifting and moving the TV

Setting up the TV

Stand

Body

Stand Base

ASSEMBLING AND PREPARING

11

ENG

ENGLISH

ENG

ENGLISH

(Only 32/37LV3500)

1

Lay the TV with the screen side down on a flat

surface.

y

Lay a foam mat or soft protective cloth

on the surface to protect the screen from

damage.

CAUTION

2

Assemble the parts of the Stand Body with the

Stand Base of the TV.

Stand Body

Stand Base

3 Secure the TV and the stand with the 4 screws.

(Only 32/37LK450)

1

Lay the TV with the screen side down on a flat

surface.

Lay a foam mat or soft protective cloth

on the surface to protect the screen from

damage.

CAUTION

2

Assemble the parts of the Stand Body with the

Stand Base of the TV.

Stand Body

Stand Base

3 Secure the TV and the stand with the 4 screws.

Not using the Dest-Type Stand

y

Image shown may differ from your T

V.

(Only 32/37LK450)

1

Push the supplied protection cover into the

opening at the bottom of the TV until clicking

sound.

Protection cover

ASSEMBLING AND PREPARING

12

ENG

ENGLISH

ENG

ENGLISH

Mounting on a table

Lift and tilt the TV into its upright position on a

table.

- Leave a 10 cm (minimum) space from the

wall for proper ventilation.

2

Connect the power cord to a wall outlet.

y Do not place the TV near or on sources

of heat, as this may result in fire.

CAUTION

Swivel 20 degrees to the left or right and adjust

the angle of the TV to suit your view .(Except for

22/26LV250022/26LV5500)

Securing the TV to a table



Image shown may differ from your T

V.

Only 32/37LV3500 32/37LK450)

Fix the TV to a table to prevent from tilting forward,

damage, and potential injury.

Mount the TV on a table, and then insert and

tighten the supplied screw on the rear of the stand.

y

To prevent TV from falling over, the TV

should be securely attached to the floor/

wall per installation instructions. Tipping,

shaking, or rocking the TV may cause

injury.

WARNING

Swivel stand

Image shown may differ from your TV

y

Wall mount:horizontal installtion

We recommend the use of a LG Brand wall mo-

unting bracket when mounting the TV to a wall.

We recommend that you purchase a wall mou-

nting bracket which supports VESA standard.

LG recommends that wall mounting be perfo-

rmed by a qualified professional installer.

NOTE

Should install wall mount on a soild wall per-

pendicular to the floor.

Should use a special wall mount,if you want

to install it to ceiling or slanted wall.

The surface that wall mount is to be mounted

on should be of sufficient strength to support

the weight of TV set ;e.g:concrete,natural ro-

ck brick and hollow block.

Installing screw type and length depends on

the wall mount used.Further information,refer

to the instructions included with the mount.

LG is not liable for any accidents or damage

to property or TV due to incorrect installation:

—Where a non-compliant VESA wall mount

is used.

—Inorrect fastening of screws to surface which

may cause TV to fall and cause personal in-

jury.

—Not following the recommended Installation

method.

y

10 cm

ASSEMBLING AND PREPARING

13

ENG

ENGLISH

ENG

ENGLISH

Careful installation advice

This feature is not available for all models.

Image shown may differ from your TV.

CAUTION

Kensington security system

You should purchase necessary components to fix

the TV safety and secure to the wall on the market.

Position the TV close to the wall to avoid the poss-

ibility of it falling when pushed.

The instructions shown below are a safer way to set

up the TV, by fixing it to the wall, avoiding the possi-

bility of it falling forwards if pulled.

This will prevent the TV from falling forward and ca-

using injury. This will also prevent the TV from dam-

age. Ensure that children do not climb or hang from

the TV.

1 Use the eye-bolts or TV brackets/bolts to fix the

product to the wall as shown in the picture.

(If your TV has bolts in the eyebolts, loosen then

bolts.)

* Insert the eye-bolts or TV brackets/bolts and

tighten them securely in the upper holes.

2 Secure the wall brackets with the bolts on the

wall. Match the height of the bracket that is

mounted on the wall.

3 Use a sturdy rope to tie the product for align-

ment. It is safer to tie the rope so it becomes

horizontal between the wall and the product.

When moving the TV undo the cords first.

Use a platform or cabinet strong and large en-

ough to support the size and weight of the TV.

To use the TV safely make sure that the height

of the bracket on the wall and on the TV is the

same.

This feature is not available for all models.

Image shown may differ from your TV.

The TV is equipped with a Kensington Security Syst-

em connector on the back panel. Connect the Kensi-

ngton Security System cable as shown below.

For the detailed installation and use of the Kensington

Security System, refer to the user’s guide provided w-

ith the Kensington Security System.

For further information, contact http://www.kensington

.com, the internet homepage of the Kensington comp-

any. Kensington sells security systems for expensive

electronic equipment such as notebook PCs and LCD

projectors.

The Kensington Security System is an optional a-

ccessory.

If the TV feels cold to the touch, there may be a

small “flicker” when it is turned on.

This is normal, there is nothing wrong with TV.

Some minute dot defects may be visible on the s-

creen, appearing as tiny red, green, or blue spots.

However, they have no adverse effect on the mo-

nitor's performance.

Avoid touching the LCD screen or holding your fi-

nger(s) against it for long periods of time.

Doing so may produce some temporary distortion

effects on the screen.

CAUTION



ASSEMBLING AND PREPARING

14

ENG

ENGLISH

ENG

ENGLISH

1

2

After connecting the cables as necessary, install

Cable Holder as shown and bundle the cables.

Tidying cables

Image shown may differ from your TV

Connection of TV

DC Adapter

1

Connect the antenna cable to the antenna

input port on the TV.

2

Connect the DC adapter plug to the power

input jack on the TV.

3

Connect the power cord to the DC adapter

first, then plug the power cord into the wall

power outlet.

(Only 22/26LV2500,22/26LV5500)

Image shown may differ from your TV.

•

Cable Holder

(Only 22/26LV2500,32/37LV3500,22/26LV5500)

(Only 32/37LK450)

Gather and bind the cables with the cable mana-

gement clip.

Fix the cable management clip firmly to the TV.

y

Do not move the TV by holding the

cable management clip, as the cable

management clip may break, and injuries

and damage to the TV may occur.

NOTE

Cable Management Clip

15

ASSEMBLING AND PREPARING

ENG

ENGLISH

ENG

ENGLISH

REMOTE CONTROL

Enters numbers.

Accesses the saved programme list.

Returns to the previously viewed programme.

(POWER)

Switches the TV on from standby or on to standby.

Adjusts the brightness of the screen to reduce energy consumption.

Selects an AV mode.

External in put mode rotate in regular sequence.

Selects Radio, TV and DTV programme.

Adjusts the volume level.

Check and un-check programmes in the USB menu.

Accesses your favourite programme list.

Mutes all sounds.

Scrolls through the saved programmess.

Moves to the previous or next screen.

Accesses the Home menu.

Accesses the quick menus.

(up/down/left/right)

Allows you to navigate the on-screen menus and adjust the system

setting to your preference

Selects menus or options and confirms your input.

Returns to the previous level.

Shows programme guide.

Clears all on-screen displays and return to TV viewing.

These buttons are used for teletext (on TELETEXT models only),

Programme edit.

Controls the MY MEDIA menus or the SIMPLINK compatible devices

(USB,SIMPLINK ).

Resizes an image

Recalls your preferred subtitle in digital mode.

Views the information of the currently programme and the screen.

ENERGY SAVING

AV MODE

INPUT

TV/RAD

Number buttons

L

IST

Q.VIEW

MARK

FAV

MUTE

P

PAGE

GUIDE

HOME

Q.MENU

Navigation buttons

OK

BACK

EXIT

Coloured buttons

SUBTITLE

INFO

Control buttons

（

）

RATIO

TEXT/T.OPT

Accesses the AV devices connected to the TV;

Opens the SIMPLINK menu.

These buttons are used for teletext.

For further details, see the ‘Teletext’ section.

Do not mix old and new batteries, as this may damage the remote control.

CAUTION

Make sure to point the remote control at the remote control sensor on the TV.

Open the battery compartment cover on the back and install the batteries m-

atching correct polarity (+with +,-with -).

Install two 1.5V AAA batteries. Do not mix old or used batteries with new ones.

Close cover.

16

REMOTE CONTROL

ENG

ENGLISH

ENG

ENGLISH

17

WATCHING TV

y

For optimum picture quality, adjust

antenna direction.

y

In poor signal areas, to achieve better

picture quality it may be necessary to

install a signal amplifier to the antenna.

y

If the image quality is poor with an

antenna connected, aim the antenna to

the correct direction.

y

An antenna cable and converter are not

supplied.

NOTE

Turning the TV on for the first

time

When you turn the TV on for the first time, the

Initial setting screen appears. Select a language

and customize the basic settings.

1

Connect the power cord to a power outlet.

2

In Standby mode, press (POWER) to turn the TV

on.

The Initial setting screen appears if you turn

the TV on for the first time.

y

You can also access Factory Reset by

accessing OPTION in the main menus.

NOTE

Connecting an antenna

Connect an antenna to watch TV while referring to

the following.

To prevent damage do not connect to the mains

outlet until all connections are made between the

devices.

Connect the TV to a wall antenna socket with an

RF cable (75 Ω).

3

Follow the on-screen instructions to customize

your TV settings according to your preferences.



For those countries without confirmed

DTV broadcasting standards, some DTV

features might not work, depending on

the DTV broadcasting environment.

NOTE

4 When the basic settings are complete,

press OK.

y If you do not complete the Initial setting, it

will appear whenever the TV turns on.

y Disconnect the power cord from the

power outlet when you do not use the TV

for a long period of time.

NOTE

Watching TV

1

In Standby mode, press

(POWER)

to turn the

TV on.

2

Press INPUT and select Antenna.

3

To turn the TV off, press

(POWER)

.

The TV switches to Standby mode.

Selects a country to display.

Country

Selects Home Use for the

home environment.



Mode Setting



Auto Tuning

Scans and saves

available programmes

automatically.



Power Indicator

Sets the power indicator.

(When you select Home Use

from Mode Setting)

ENG

ENGLISH

ENG

ENGLISH

The following values are needed in order to

search all available programmes quickly and

correctly.

The commonly used values are provided as

"default".

However, for correct settings, please inquire

of the cable service provider.

When running Auto Tuning in DVB cable

mode, selecting Full will search through all

frequencies to find available channels.

In the case when the programme is not

searched by selecting the Default, perform the

searching by selecting the Full.

However, in the case when the programme is

searched by selecting the Full, the Auto Tun-

ing time can be taken too much.

1 Press Home to access the main menus.

2 Press the Navigation buttons to scroll to

SETUP and press OK.

3 Press the Navigation buttons to scroll to

Manual Tuning and press OK.

4 Press the Navigation buttons to scroll to DTV

and press OK.

5 Scroll through the programme types, and then

add or delete programmes.

6 When you are finished, press EXIT.

When you return to the previous menu, press

BACK.

Manually setting up programme (In

digital mode)

Manual Tuning lets you manually add a pro-

gramme to your programme list.

Selecting Antenna,

NOTE

If the TV scans a blocked programme, you

will be prompted to enter your password to

keep the programme scanned.

•

Frequency : Enter a user-defined fre-

quency.

•

Symbol rate : Enter a user-defined symbol

rate (Symbol rate: Speed at which a

device such as modem sends symbols to

a channel).

•

Modulation : Enter a user-defined modula-

tion. (Modulation: Loading of audio or

video signals onto carrier).

•

Network ID : Unique identifier allocated for

each user.

•

Start Frequency : Enter a user-defined

start frequency range.

•

End Frequency : Enter a user-defined end

frequency range.

Managing programmes

Use this to automatically find and store all avail -

able programmes.

When you start auto programming, all previously

stored service information will be deleted.

1 Press Home to access the main menus.

2 Press the Navigation buttons to scroll to

SETUP and press OK.

3 Press the Navigation buttons to scroll to

Auto Tuning and press OK.

4. Press the Navigation buttons to scroll to

Antenna and press OK.

5 Select Start to start automatic tuning.

The TV scans and saves available pro-

grammes automatically.

6 When you are finished, press EXIT.

When you return to the previous menu, press

BACK.

Automatically setting up pro-

gramme

NOTE

If the TV scans a blocked programme, you

will be prompted to enter your password to

keep the programme scanned.

You can store up to 1,000 programmes. The

number of programmes that you can store

differs depending on the broadcasting signal

environment.



18

WATCHING TV

ENG

ENGLISH

ENG

ENGLISH

19

WATCHING TV

 If the TV scans a blocked programme, you

will be prompted to enter your password to

keep the programme scanned.

 L : SECAM L/L’ (France)

 BG : PAL B/G, SECAM B/G (Europe / East

Europe / Asia / New Zealand / M.East /

Africa)

 I : PAL I (U.K. / Ireland / Hong Kong / South

Africa)



DK : PAL D/K, SECAM D/K (East Europe /

China / Africa / CIS)

 ot 5 spets taeper ,lennahc rehtona erots oT

10.

Manually setting up programme (In

analogue mode)

Manual Tuning lets you manually tune and arrange

the stations in whatever order you desire.

1 Press Home to access the main menus.

2 Press the Navigation buttons to scroll to

SETUP and press OK.

3 Press the Navigation buttons to scroll to

Manual Tuning and press OK.

4 Press the Navigation buttons to scroll to

TV or Cable TV and press OK.

5 Scroll through the programme types, and then

add or delete programmes.

6 Press the Navigation buttons to scroll to

TV System.

7 Press the Navigation buttons to scroll to

V/UHF or Cable.

8 Press the Navigation buttons or Number but-

tons to scroll to the desired channel number.

9 Press the Navigation buttons to scroll to

commence searching.

10 Press the Navigation buttons to scroll to

Store and press OK.

11 When you are finished, press EXIT.

When you return to the previous menu, press

BACK.

NTSC M:USA/Korea/Philippines

Assigning a station name

You can assign a station name with five characters

to each programme number.

1 Press Home to access the main menus.

2 Press the Navigation buttons to scroll to

SETUP and press OK.

3 Press the Navigation buttons to scroll to

Manual Tuning and press OK.

4 Press the Navigation buttons to scroll to

TV or Cable TV.

5 Press the Navigation buttons to scroll to

Name and press OK.

6 Press the Navigation buttons to scroll Select

the position and make your choice of the sec-

ond character, and so on. You can use an the

alphabet A to Z, the number 0 to 9, +/ -, and

blank and press OK.

7 Press the Navigation buttons to scroll to

Close and press OK.

8 Press the Navigation buttons to scroll to

Store and press OK

9 When you are finished, press EXIT.

When you return to the previous menu, press

BACK.

NOTE

ENG

ENGLISH

ENG

ENGLISH

Editing your programme list

1

Press Home to access the main menus.

2

Press the Navigation buttons to scroll to

SETUP and press OK.

3

Press the Navigation buttons to scroll to

Programme Edit and press OK.

4

Press the Navigation buttons to select a

programme to be stored or skipped.

5

When you are finished, press EXIT.

When you return to the previous menu, press

BACK.

Fine Tuning

Normally fine tuning is only necessary if reception

is poor.

When a programme number is skipped, it means

that you will be unable to select it using P

^

,

ton during TV viewing.

If you wish to select the skipped programme,

directly enter the programme number with the

NUMBER buttons or select it in the Programme

edit menu.

This function enables you to skip the stored pro

grammes.

You can change the programme number using

“Move”function, if “Automatic Numbering” is un

checked when you start Auto Tuning.

1 Press Home to access the main menus.

2 Press the Navigation buttons to scroll to

SETUP and press OK.

3 Press the Navigation buttons to scroll to

Manual Tuning and press OK.

4 Press the Navigation buttons to scroll to

TV or Cable TV.

5 Press the Navigation buttons to scroll to

Fine.

6 Fine tune for the best picture and sound.

7 Press the Navigation buttons to scroll to

Store and press OK

8 When you are finished, press EXIT.

When you return to the previous menu, press

BACK.

20

WATCHING TV

Page is loading ...

LG 37LK450 Owner's manual

LG 37LK450 Owner's manual

Related papers

Other documents