The label inside the battery bay appears as one of the following:
2
Make a note of the large number on the label on the old base. The number
represents the management mode number.
3
Locate the matching label supplied with the
base
kit, and affix the new
label to the new
base
:
a
Align the left side of the new label to the right side of the recessed
label that is already in the base.
b
Align the top of the new label to the top of the battery bay. For
reference, view the illustration on the previous page.
____________________
Information in this document is subject to change without notice.
© 2007 Dell Inc. All rights reserved. Printed in Malaysia.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly
forbidden.
Trademarks used in this text: Dell, the DELL logo, and Latitude are trademarks of Dell Inc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming
the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and
trade names other than its own.
HW379eb1.fm Page 2 Monday, October 15, 2007 12:40 PM
