Facom S.208-340D Owner's manual

Brand: Facom

Model: S.208-340D

Type: Owner's manual

This manual is also suitable for

S.208A340

Facom S.208-340D is a torque wrench from Facom. It is a high-precision tool used to apply a specific amount of torque to a fastener. This helps to prevent overtightening or undertightening, which can damage the fastener or the workpiece. The S.208-340D has a range of 10 to 50 Newton meters (Nm), which makes it suitable for a variety of applications, including assembling furniture, automotive repairs, and bicycle maintenance. The wrench has a 1/2-inch drive and comes with a set of interchangeable sockets.

Notice d'instructions

Instruction manual

Bedienungsanleitung

Gebruiksaanwijzing

Guia de instrucciones

Istruzioni per l'utilizzo

Instrukcja obs∏ugi

NU-JS.208-248/0702

J.S.208

J.S.248

BELGIQUE/LUXEMBOURG

FACOM Belgique S.A/NV

Weihoek 4 1930 Zaventem

BELGIQUE

✆ : (02) 714 09 00

Fax : (02) 721 24 11

DANMARK/FINLAND

ISLAND/NORGE

SVERIGE

FACOM NORDEN A/S

Navervej 16B

7451 Sunds

DANMARK

✆ : (45) 971 444 55

Fax : (45) 971 444 66

DEUTSCHLAND

FACOM GmbH

Postfach 13 22 06

42049 Wuppertal

Otto-Wels-Straße 9

42111 Wuppertal

DEUTSCHLAND

✆ : (0202) 270 63 0

Fax : (0202) 270 63 50

ESPAÑA/PORTUGAL

FACOM Herramientas SRL

Polig. industrial de Vallecas

C.Luis 1°, s/n-Nave 95 - 2°Pl.

28031 Madrid

ESPAÑA

✆ : (91) 778 21 13

Fax : (91) 778 27 53

ITALIA

USAG Gruppo FACOM

Via Volta 3,

21020

Monvalle (VA)

ITALIA

✆ : (0332) 790 111

Fax : (0331) 790 602

POLSKA

FACOM Oddzial w Warszawie

ul. Marconich 9 m.3

02-954 Warszawa

POLSKA

✆ : (0048 22) 642 71 14

Fax : (0048 22) 651 74 69

NEDERLAND

FACOM Gereedschappen BV

Kamerlingh Onnesweg 2

Postbus 134

4130 EC Vianen

NEDERLAND

✆ : (0347) 362362

Fax : (0347) 376020

SINGAPORE/FAR EAST

FACOM Tools FAR EAST Pte.Ltd

15 Scotts Road

Thong Teck Building # 08.01.02

Singapore 228218

SINGAPORE

✆ : (65) 732 0552

Fax : (65) 732 5609

SUISSE/ÖSTERREICH

MAGYARORSZAG

CESKA REP.

FACOM S.A./AG

12 route Henri-Stéphan

1762 Givisiez/Fribourg

SUISSE

✆ : (4126) 466 42 42

Fax : (4126) 466 38 54

UNITED KINGDOM/EIRE

FACOM -UK

Churchbridge Works-Walsall Road

CANNOCK STAFFORDHIRE WS11 3JR

UNITED KINGDOM

✆ : (01922) 702 150

Fax : (01922) 702 152

UNITED STATES

FACOM TOOLS Inc.

3535 West 47th Street

Chicago Illinois 60632

U.S.A.

✆ : (773) 523 1307

Fax : (773) 523 2103

FRANCE ET

INTERNATIONAL

Société FACOM

6-8, rue Gustave Eiffel B.P.99

91423 Morangis cedex

FRANCE

✆ : 01 64 54 45 45

Fax : 01 69 09 60 93

http://www.facom.fr

Page is loading ...

For series 208 Setting the required torque For series 248

1 • Pull the ring towards the handle

2 • Turn the handle and set the vernier to

the desired graduation

3 • Release the ring, which will then click

into position.

Hints

• Use the torque table at the end of these instructions • The standard unit of measurement is the Newton-metre, symbol “Nm”

1 metre-kilo = 9.81 Nm

(about 10 Nm)

1 ft/lb = 1.35 Nm 1 in/lb = 0,1128 Nm 1 in/oz = 0.00705 Nm

1 Nm = 0.102 metre-kilo

(about 100 g/m)

1Nm = 0,738 ft/lb 1 Nm = 8.863 in/lb 1 Nm = 141.8 in/oz

• Never exceed the maximum torque of your wrench, taking special care when freeing tight nuts and during angular tightening.

• Set the torque wrench to the minimum torque before putting it away in its box.

Maintenance

• Clean your torque wrench with a dry cloth. Do not use any solvent or detergent.

• Never dismantle.

Maintenance of precision

• We advise you to have your torque wrench checked regularly on a test rig or by the FACOM metrological laboratory

(about once a year, or more often for intensive

use or if dropped)

Precision checking and updating of reports:

• The FACOM metrological laboratory will draw up test reports or calibration certificates on request :

For series 208 . Test report : Testing and adjustment, if necessary, at

20, 60 and 100% of the torque wrench’s capacity, within the tolerances

specified in the standard.

A dated and numbered report is drawn up.

Calibration certificate : Testing and adjustment of the torque wrench at

6 or 12 values, testing apparatus linked to the national measuring stan-

dard. A dated and numbered official document is drawn up.

For further information ; ask your dealer.

For series 248. Test report : Repetitive testing

(and adjustment if necessary)

at 20, 60 and 100% of the torque wrench’s capacity, within the tolerances

specified in the standard.

A dated and numbered report is drawn up.

Pre-setting : Setting to required torque and testing repeatability.

A dated and numbered report is drawn up.

Tightening

A • Hold the torque wrench at right angles to the

tightening axis

B • Place your hand in the middle of the handle

C • Pull progressively and at right angles to the torque

wrench

D • When the wrench "clicks" stop pulling immediately.

1 • Unscrew plug b and insert an allen key at the

back of the wrench.

2 • Adjust to the required torque with a testing

device. Tighen to increase the torque, untighten

to decrease.

3 • Remove the allen hey and screw plug b back on.

Page is loading ...

Facom S.208-340D Owner's manual

Brand: Facom

Model: S.208-340D

Type: Owner's manual

This manual is also suitable for

S.208A340

Download PDF

report

in other languages

italiano: Facom S.208-340D Manuale del proprietario
français: Facom S.208-340D Le manuel du propriétaire
español: Facom S.208-340D El manual del propietario
Deutsch: Facom S.208-340D Bedienungsanleitung
Nederlands: Facom S.208-340D de handleiding
polski: Facom S.208-340D Instrukcja obsługi

Facom S.208-340D Owner's manual

This manual is also suitable for

Facom S.208-340D Owner's manual

in other languages

Related papers

Other documents