Philips SHB9100WT/00 Quick start guide

Category
Mobile headsets
Type
Quick start guide

Philips SHB9100WT/00: Experience seamless wireless connectivity, exceptional sound quality, and hands-free convenience with our advanced Bluetooth stereo headset. Enjoy music, make and receive calls, and activate voice dialing with ease. Its intuitive controls and long battery life make it the perfect companion for your active lifestyle.

Philips SHB9100WT/00: Experience seamless wireless connectivity, exceptional sound quality, and hands-free convenience with our advanced Bluetooth stereo headset. Enjoy music, make and receive calls, and activate voice dialing with ease. Its intuitive controls and long battery life make it the perfect companion for your active lifestyle.

Quick start guide
Philips Bluetooth stereo headset SHB9100WT
Pair the headset with your mobile phone
1 Make sure that your mobile phone is
turned on and its Bluetooth feature is
activated.
2 Make sure that the headset is charged
and turned off.
3 Press and hold until the LED starts
ashing white and blue alternately.
» The headset is in pairing mode,
which lasts ve minutes.
4 Pair the headset with your mobile
phone. For details, refer to the user
manual of the mobile phone.
Enter “0000” (4 zeros), if
prompted to enter the pin
code of the headset.
EN
Please refer to www.philips.com/welcome for full user manual.
Settings
Select
Back
Connectivity
10:37
Enter Password
****
0000
Settings
Bluetooth
Select
Back
Connectivity
10:35
Add
Bluetooth
device
Settings
Devices Found
Select
Back
10:36
Philips SHB6000
Settings
Select
Back
Connectivity
10:37
Enter Password
****
0000
Settings
Bluetooth
Select
Back
Connectivity
10:35
Add
Bluetooth
device
Settings
Devices Found
Select
Back
10:36
Philips SHB9100WT
Turn the headset on.
Press and hold for more than 4 seconds
Turn the headset off.
Press and hold for more than 4 seconds
Play or pause music.
Press
Pick up or terminate a call.
Press
Reject a call.
Press and hold
Redial the last number.
Press twice
Switch caller in a call.
Press twice
Transfer a call to your mobile phone.
(This function is available if your mobile
phone supports this feature.)
Press and hold for more than 4 seconds
Adjust volume. Slide up / down VOL +/-
Skip forward. Press
Skip backward. Press twice
Mute/unmute the microphone in a call. Press
Activate voice dialing Press twice
Use your headset
*Available if supported by your mobile phone.
The headset is connected to a Bluetooth
device, while the headset is in standby
mode or while you are listening to music.
Blue LED ashes every 8 seconds.
The headset is ready for pairing. LED ashes whiteand blue alternately.
The headset is on but not connected to a
Bluetooth device.
Blue LED ashes fast.
There is an incoming call. Blue LED ashes twice per second.
Low battery. White LED ashes.
Battery is fully charged. White LED ashes.
The LED is off. The headset is off./Charging is nished.
The headset beeps every 5 seconds The Mic is muted.
Other status and indicators
© 2012 Koninklijke Philips Electronics N.V. All rights reserved.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
V2.0
Welcome to Philips!
For an optimal experience, register your product at
www.philips.com/welcome
  • Page 1 1
  • Page 2 2

Philips SHB9100WT/00 Quick start guide

Category
Mobile headsets
Type
Quick start guide

Philips SHB9100WT/00: Experience seamless wireless connectivity, exceptional sound quality, and hands-free convenience with our advanced Bluetooth stereo headset. Enjoy music, make and receive calls, and activate voice dialing with ease. Its intuitive controls and long battery life make it the perfect companion for your active lifestyle.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI