yellowblue
1-7
The front seatback folds forward to let people get into
the back seat. The seatback latch is designed for
one-handed operation.
To fold a front seatback forward, lift the seatback latch
fully without pushing forward on the seatback.
Push the seatback to its original position, the seatback
will lock.
Easy Entry Seat (2-Door Models)
CAUTION:
If an easy entry right front seat isn’t locked, it
can move. In a sudden stop or crash, the person
sitting there could be injured. After you’ve used
it, be sure to push rearward on an easy entry seat
to be sure it is locked.
The right front seat of your vehicle makes it easy to get
in and out of the rear seat.
1. Fold the right front seatback forward by lifting the
seatback latch fully.
2. The seat will slide forward to allow someone to get
into the rear seat area.
3. Push the seatback upright to lock and slide the seat
fully rearward to lock.
4. Adjust the seat to the desired position.
5. The front passenger should try to move the seat to
make sure the seat is locked into place.
Rear Seats
Folding the Rear Seat
To fold down the rear seat,
pull the release straps
located in the trunk. The
right strap operates the right
rear split seat. The left
strap operates the left rear
split seat.
Fold the seatback down from the inside of the vehicle.
Push the seatback up to return it to its original position.
To make sure the seatback is secure, push the seatback
into a fully upright position. Pull the seatback forward
slightly to make sure that it is latched. The seatback
should not fold down.