>>assembly instructions
Style Number : K4638
2
Congratulations on your latest HomePop purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck --though we’re confident you won’t need it.
1. Check for damaged or missing parts. Customers can email service@kinfine.com or call 1-888-626-0888 to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Gather all tools prior to assembly.
before you begin
..............................................
table of contents
introduction
hardware
parts list
assembly
2
4
5
6 - 10
QUESTIONS?
Just email service@kinfine.com or call 1-888-626-0888 parts and service. For fast service, have the style number and article number ready when calling.
3
............................................................................
(G) x 1
5mm Ball end
Hex wrench
(D) x 10
Φ 8mm lock washer
hardware
4
(E) x 10
Φ 22mm flat washer
(A) x 4
5/16" x 90mm
round hex screw
(B) x 2
5/16" x 55mm
round hex screw
(C) x 4
5/16" x 50mm
round hex screw
(F) x 1
dowel 10x40mm
............................................................................
5
ITEM DESCRIPTION QUANTITY
1
2
3
4
chair back
seat cushion
front leg
pillow
1
1
2
1
1
2
3
3
4
............................................................................
step 1.
1 2
6
Please do not assemble with power tools
(G) x 1
5mm Ball end
Hex wrench
(C) x 4
5/16" x 50mm
round hex screw
(D) x 4
Φ 8mm lock washer
(E) x 4
Φ 22mm flat washer
O
p
en t
h
e v
e
l
cr
o
.
C
D
E
G
2
3
3
............................................................................
step 2.
7
1 2
Please do not assemble with power tools
(G) x 1
5mm Ball end
Hex wrench
Do not tighten these two bolts
until the next step.
(F) x 1
dowel 10x40mm
F
(B) x 2
5/16" x 55mm
round hex screw
(D) x 2
Φ 8mm lock washer
(E) x 2
Φ 22mm flat washer
B
C
E
G
until all screws are lined up with the frame. Please do
............................................................................
step 3.
8
1
Please do not assemble with power tools
(G) x 1
5mm Ball end
Hex wrench
(A) x 4
5/16" x 90mm
round hex screw
Now you may tighten all 6 bolts.
(D) x 4
Φ 8mm lock washer
(E) x 4
Φ 22mm flat washer
A
D
E
G
until all screws are lined up with the frame. Please do
............................................................................
step 4.
9
C
lo
se the ve
lcr
o
.
1
2
4
............................................................................
step 5.
10
A friendly reminder from us:
Please keep the Allen wrench.
After a period of time, there may be a chance the
KD furniture may become loose, please use an
Allen wrench to tighten the loose bolts.
Adjustable leveling feet
( This part is already attached on the end cap of 4 legs. )
Level the furniture, use leveling feet if needed.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
Homepop K4638-F2245 Operating instructions
- Type
- Operating instructions
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
BELLACOR K6757 Assembly Instructions Manual
-
Powerline P2X User manual
-
Body-Solid P2X User manual
-
Ryobi CSD 42 LS Datasheet
-
JET GH-1440B Owner's manual
-
Grizzly G0824 Owner's manual
-
Steel City 40250 User manual
-
Southbend SB1053 User manual
-
Cannondale Scalpel 2003 Owner's manual
-
